Items where Subject is "Institut für Systemleichtbau > Composite Design"
![]() | Up a level |
- Institutes and Facilities (142206)
- Institut für Systemleichtbau (503)
- Composite Design (160)
- Institut für Systemleichtbau (503)
Number of items at this level: 160.
Abu-Zurayk, Mohammad and Ilic, Caslav and Schulze, Matthias and Kiehn, Daniel and Wallace, Christian and Reimer, Lars and Süelözgen, Özge and Dähne, Sascha and Wegener, Patrick and Häßy, Jannik and Kaiser, Christoph and Balani, Anjali Umesh (2024) DEVELOPMENT OF METHODS FOR MULTIDISCIPLINARY WING DESIGN AND OPTIMIZATION UNDER LOAD ALLEVIATION. DLRK Conference, 2024-09-30 - 2024-10-02, Hamburg, Germany. Volltext nicht online. |
Ali, Hafiz Qasim and Wagner, Ronald and Akalin, C. and Tabrizi, I.E. and Hühne, Christian and Yildiz, Mehmet (2023) Buckling and fracture analysis of thick and long composite cylinders with cutouts under axial Compression: An experimental and numerical campaign. Composite Structures. Elsevier. doi: 10.1016/j.compstruct.2023.117530. ISSN 0263-8223. Volltext nicht frei. | ![]() |
Andres, Marcel (2023) Transfer zu höherer Composite-Qualität mit der DIN SPEC 35255. Other. Other. | ![]() |
Andres, Marcel and Simon, Stefan and Groß, Andreas and Kelch, Milian and Berger, Uwe and Männel, Kristof and Bahrmann, Oliver and Enninghorst, Guido and Seitz, Calvin and Janke, Andrea and Band, Julian and Stein, Frank and Schuch, Christian and Heinze, Carina (2023) Qualitätsanforderungen an Composite-Prozesse. Beuth Verlag. [Other] Volltext nicht online. |
Barth, Tilmann and Wiedemann, Johannes and Roloff, Thomas and Behrens, Tim and Rauter, Natalie and Hühne, Christian and Sinapius, Michael and Lammering, Rolf (2023) Experimental determination of dispersion diagrams over large frequency ranges for guided ultrasonic waves in fiber metal laminates. Smart Materials and Structures. Institute of Physics (IOP) Publishing. doi: 10.1088/1361-665X/ace0ea. ISSN 0964-1726. | ![]() |
Barth, Tilmann and Wiedemann, Johannes and Roloff, Thomas and Hühne, Christian and Sinapius, Johannes Michael and Rauter, Natalie (2023) Investigations on Guided Ultrasonic Wave Dispersion Behavior in Fiber Metal Laminates Using Finite Element Eigenvalue Analysis. Proceedings in Applied Mathematics and Mechanics. Wiley. doi: 10.1002/pamm.202200149. ISSN 1617-7061. | ![]() |
Berrios Hinz, Robert Miguel and Schollerer, Martin and Ückert, Christian (2023) Untersuchung der Robustheit einer laminar erhaltenden Trennstelle zwischen HLFC-Vorderkante und Flügelbox. DLR-Interner Bericht. DLR-IB-SY-BS-2023-87. Master's. TU Braunschweig. 88 S. Volltext nicht frei. | ![]() |
Beyland, Lutz (2023) Radial und axial vorgespannte Bolzenverbindungen für dickwandige Strukturen aus Faserkunststoffverbunden. DLR-Forschungsbericht. DLR-FB-2023-24. Dissertation. Technische Universität Carolo-Wilhelmina zu Braunschweig. 214 S. doi: 10.57676/cr7j-eh73. Volltext nicht frei. | ![]() |
Beyland, Lutz and Bachmann, Jens and Nickel, Jörg (2023) Nachhaltige Rotorblätter: Bewertung und Konzepte. Arbeitsgruppentreffen des Composit United "Faserverbund in der Windindustrie", 2023-05-09, Braunschweig. Volltext nicht frei. | ![]() |
Beyland, Lutz and Hindersmann, Arne and Bäns, Constantin (2024) Segmented rotor blades - Joint concepts, Design drivers, future challenges. In: 8th Annual Wind Blade Materials Innovation and Sustainability Forum. TBM Group. 8th Annual Wind Blade Materials Innovation and Sustainability Forum, 2024-09-16 - 2024-09-17, Türkei, Istanbul. | ![]() |
Beyland, Lutz and Hindersmann, Arne and Bäns, Constantin and Keck, Jan and Prussak, Robert and Mahrholz, Thorsten (2024) High strength bolted joints for rotor blades with fibre metal Laminates. In: Wind Turbine Blades 2024, 2024. AMI Plastics. Wind Turbine Blades 2024, 2024-12-15 - 2024-12-17, Deutschland, Düsseldorf. Volltext nicht online. |
Bierig, Andreas and Nikodem, Florian and Niemann, Steffen (2023) DLR-HAP-Status_SOaRS_2023. Stratospheric Operations & Research Symposium, 2023-03-21 - 2023-03-22, Grand Forks, North Dakota, US. | ![]() |
Bogenfeld, Raffael Marius and Freund, Sebastian and Dähne, Sascha and Wunderlich, Tobias and Wille, Tobias (2023) Damage Tolerance Allowable Calculation for the Aircraft Design with Static Ultimate Load. Composite Structures. Elsevier. doi: 10.1016/j.compstruct.2023.117803. ISSN 0263-8223. Volltext nicht frei. | ![]() |
Boose, Yannick and Prussak, Robert (2024) Messen mit Licht – Glasfasern ermitteln Verformung von Faserverbundbauteilen. Other. Other. | ![]() |
Bordekar, Harsh and Cersullo, Nicola and Brysch, Marco and Philipp, Jens and Hühne, Christian (2023) eXplainable artificial intelligence for automatic defect detection in additively manufactured parts using CT scan analysis. Journal of Intelligent Manufacturing. Springer Nature. doi: 10.1007/s10845-023-02272-4. ISSN 0956-5515. | ![]() |
Briese, Lale Evrim and Kier, Thiemo and Petkov, Ivaylo and Windelberg, Jens and Heinrich, Lars and Krummen, Sven (2023) Advanced Modeling and Dynamic Stability Analysis of the Aerodynamic Control Surfaces of CALLISTO. In: AIAA SciTech 2023 Forum. AIAA SciTech Forum, 2023-01-23 - 2023-01-27, National Harbor, USA. doi: 10.2514/6.2023-2405. ISBN 978-162410699-6. Volltext nicht frei. | ![]() |
Buchenau, Theresa and Cersullo, Nicola and Mardaras, Jon and Emile, Philippe and Lafue, Victor and Brüning, Hauke and Amkreutz, Marc and Hühne, Christian (2023) Fatigue and surface texture of post-processed metal additive Ti-6Al-4V. Proceedings 17th European Conference on Spacecraft Structures, Materials and Environmental Testing, 2023-03-28 - 2023-03-30, Toulouse, Frankreich. | ![]() |
Buggisch, Manuel and Steffen, Olaf and Kleineberg, Markus and Kappel, Erik (2021) Entwicklung eines Fertigungsprozesses für eine laminare Flügelvorderkante. Deutsche Luft- und Raumfahrtkongress DLRK, 2021-08-31 - 2021-09-02, Bremen, Germany. Volltext nicht frei. | ![]() ![]() |
Cerbe, Ferdinand and Mahlstedt, Dominik and Sinapius, Michael and Hühne, Christian and Böl, Markus (2023) Relationship between programming stress and residual strain in FDM 4D printing. Progress in Additive Manufacturing. Springer Nature. doi: 10.1007/s40964-023-00477-w. ISSN 2363-9512. | ![]() |
Cersullo, Nicola (2023) Defects and Surface Roughness Assessment in Fatigue Critical Additive Manufactured Metal Components. Dissertation. Volltext nicht online. |
Cuntze, R. and Kappel, Erik (2024) Why not Designing Multidirectional Laminates with In-Plane Strength Design Sheets Applying the UD Criteria of TSAI-WU and Cuntze? Part1: Analytical Foundation. Mechanics of Composite Materials, 60 (5), pp. 889-906. Springer. doi: 10.1007/s11029-024-10233-y. ISSN 0191-5665. Volltext nicht online. |
Cuntze, R. and Kappel, Erik (2024) Why not Designing Multidirectional Laminates with In-Plane Strength Design Sheets Applying the UD Criteria of Tsai-Wu and Cuntze? Part2: Application. Mechanics of Composite Materials, 60 (5), pp. 907-918. Springer. doi: 10.1007/s11029-024-10234-x. ISSN 0191-5665. Volltext nicht online. |
Dighe, Nachiket and Beck, Roman and Koord, Josef (2025) Internship Report - Extension of permeation test stand. DLR-Interner Bericht. DLR-IB-SY-BS-2025-38. Other. TU Braunschweig. 51 S. Volltext nicht online. |
Dumont, Etienne and Sagliano, Marco and Eichel, Silas and Markgraf, Markus and Glaser, Thilo and Braun, Benjamin and Windelberg, Jens and Petkov, Ivaylo and Schröder, Silvio and Witte, Lars and Schneider, Anton and Panthen, Britta and Häseker, Janis Sebastian and Opp, Lukas and Krieger, Adrian Thomas Esteban and Stief, Malte and Woicke, Svenja and Martens, Hauke and Krummen, Sven (2023) CALLISTO: Reusable rocket stage demonstrator: getting ready for implementation. 34th International Symposium on Space Technology and Science, 2023-06-03 - 2023-06-09, Kurume in Fukuoka, Japan. Volltext nicht online. |
Dumont, Etienne and Woicke, Svenja and Eichel, Silas and Sagliano, Marco and Krieger, Adrian Thomas Esteban and Callsen, Steffen and Klevanski, Josef and Krummen, Sven and Ecker, Tobias and Windelberg, Jens and Martens, Hauke and Mierheim, Olaf and Markgraf, Markus and Glaser, Thilo and Ertl, Moritz and Stief, Malte and Heinrich, Lars and Reimann, Bodo and Bergmann, Kevin and Koch, Aaron (2024) CALLISTO Reusable rocket stage demonstrator: consolidating the design. In: 2024 IEEE Aerospace Conference, AERO 2024. IEEE. 2024 IEEE Aerospace Conference, 2024-03-02 - 2024-03-09, Big Sky, USA. doi: 10.1109/AERO58975.2024.10521353. ISBN 979-835030462-6. ISSN 1095-323X. Volltext nicht online. |
Dähne, Sascha and Klimmek, Thomas and Schuster, Andreas and Schulze, Matthias and Hühne, Christian (2023) Structural aspects of the high aspect ratio wing: DLR-F25. EASN 2023, 2023-09-05 - 2023-09-08, Salerno, Italien. Volltext nicht online. |
Dähne, Sascha and Werthen, Edgar and Zerbst, David and Tönjes, Lennart and Traub, Hendrik and Hühne, Christian (2024) Lightworks, a scientific research framework for the design of stiffened composite-panel structures using gradient-based optimization. Structural and Multidisciplinary Optimization. Springer. doi: 10.1007/s00158-024-03783-1. ISSN 1615-147X. | ![]() |
Dähne, Sascha and Zerbst, David (2023) CPACS for Rectangular Box Wing. [Other] Volltext nicht online. |
Dörrie, Robin and Gantner, Stefan and Amiri, Fatemeh Salehi and Lachmayer, Lukas and Martin, David and Rothe, Tom and Freund, Niklas and Nouman, Ahmad and Mawas, Karam and Oztoprak, Oguz and Rennen, Philipp and Ekanayaka, Virama and Hürkamp, Andre and Kollmannsberger, Stefan and Hühne, Christian and Raatz, Annika and Dröder, Klaus and Lowke, Dirk and Hack, Norman and Kloft, Harald (2025) From Digital to Real: Optimised and Functionally Integrated Shotcrete 3D Printing Elements for Multi-Storey Structures. Buildings. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/buildings15091461. ISSN 2075-5309. | ![]() |
Ehlert, Tobias and Frenzel, Yannik and Niemann, Steffen and Sloane, Nicholas and Voigt, Andreas and Voß, Arne (2023) Aeroelastische und Strukturelle Zustandsüberwachung des DLR HAP mithilfe eines verteilten Sensornetzwerkes. DLRK 2023, 2023-09-19 - 2023-09-21, Stuttgart, Deutschland. Volltext nicht online. |
Essou, Mustafa (2024) Einfluss der nicht-linearen Berechnung auf die Strukturoptimierung von Tragwerksstrukturen. DLR-Interner Bericht. DLR-IB-SY-BS-2024-188. Student thesis. TU Braunschweig. 82 S. | ![]() |
Franke, Florian and Burger, Uli and Hühne, Christian (2023) A novel reduced order model for drone impacts with aircraft structures. CEAS Aeronautical Journal. Springer. doi: 10.1007/s13272-023-00646-1. ISSN 1869-5590. | ![]() |
Franke, Florian Steffen (2022) Modelle und Methoden zur Bestimmung von Lasten bei Drohnenschlägen auf Luftfahrzeugstrukturen. Dissertation. doi: 10.24355/dbbs.084-202211041154-0. | ![]() |
Gahleitner, Lukas and Thummerer, Gregor and Plank, Bernhard and Wiedemann, Johannes and Mayr, Günther and Hühne, Christian and Burgholzer, Peter and Cakmak, Umut (2024) Photothermal defect imaging in hybrid fiber metal laminates using the virtual wave concept. Journal of Applied Physics. American Institute of Physics (AIP). doi: 10.1063/5.0188449. ISSN 0021-8979. | ![]() |
Gesell, Thomas (2024) Strukturelles Kleben hält den Flüssigwasserstofftank im Flugzeug zusammen. Other. Other. | ![]() |
Govers, Yves and Gnebner, Kevin and Gundlach, Janto and Tang, Martin and Thiem, Carsten and Knebusch, Johannes and Buchbach, Ralf and Sinske, Julian and Soal, Keith Ian and Schwochow, Jan and Winter, Rene and Hach, Oliver and Verdonck, Hendrik and Hennings, Holger and Opitz, Steffen and Moix-Bonet, Maria and Garbade, Marc and Kühn, Michael and Liebers, Nico and Prussak, Robert and Jauken, Helge and Liesecke, Leon and Wölk, Philipp and Seume, Jörg R. and Messing, Ralf and Troyke, Alexander and Bertolotti, Fabio (2023) German research wind farm WiValdi: Planning, installation and testing of innovative research instrumentation for six wind turbine rotor blades. Wind Energy Science Conference, 2023-05-23 - 2023-05-26, Glasgow, Großbritannien. (Unpublished) Volltext nicht online. |
Hauser, Rebekka (2024) Experimentelle Untersuchung CFK als Strukturmaterial für Flüssigwasserstofftanks. DLR-Interner Bericht. DLR-IB-SY-BS-2025-13. Master's. TU Braunschweig. 178 S. Volltext nicht online. |
Hecken, Tobias and Balack, Philip and Petsch, Michael and Zerbst, David (2022) Conceptual Loads Assessment of Aircraft with Fuselage Integrated Liquid Hydrogen Tank. Deutscher Luft- und Raumfahrtkongress 2022, 2022-10-27 - 2022-10-29, Dresden, Deutschland. | ![]() ![]() |
Hilchenbach, Martin and Kleine, Thorsten and Grundmann, Jan Thimo and Stenzel, Oliver J. and Renggli, Christian and Nathues, Andreas and Krupp, Norbert and Fischer, Henning and Biele, Jens and Ulamec, Stephan and Ho, Tra-Mi and Güttler, Carsten and Gundlach, Bastian and Goldmann, Moritz and Schmitz, Nicole and Aksteiner, Niklas and Chand, Suditi and Ciano, Claudio and Eichstaedt, Felix and Eller, Dennis and Eßmann, Olaf and Feiler, Hannah and Firchau, Thomas and Fexer, Sebastian and Goldyn, Pawel and Heberhold, Moritz and Hernandez Megia, Victor and Kirchhefer, Christoph and Ksenik, Eugen and Lange, Michael and Marquardt, Pascal and Nohka, Falk and Romberg, Oliver and Passenberg, Felix Constantin and Quantius, Dominik and Schneider, Anton and Schulz, Rene and Seibert, Fabienne Monique and Siemer, Martin and Theil, Stephan and Tsakyridis, Georgios and Wendel, Niklas and Vincent, Jean-Baptiste and Wippermann, Torben and Witte, Lars (2024) Snatching a sample of a genuine Near-Earth Asteroid: A very swift sample return opportunity. Europlanet Society. Europlanet Science Congress (EPSC), 2024-09-08 - 2024-09-13, Berlin, Germany. doi: 10.5194/epsc2024-98. | ![]() |
Hilchenbach, Martin and Stenzel, Oliver J. and Renggli, Christian and Nathues, Andreas and Krupp, Norbert and Fischer, Henning and Kleine, Thorsten and Biele, Jens and Ulamec, Stephan and Grundmann, Jan Thimo and Ho, Tra-Mi and Güttler, Carsten and Gundlach, Bastian and Goldmann, Moritz and Schmitz, Nicole and Aksteiner, Niklas and Chand, Suditi and Eichstaedt, Felix and Eßmann, Olaf and Feiler, Hannah and Firchau, Thomas and Fexer, Sebastian and Goldyn, Pawel and Heberhold, Moritz and Hernandez Megia, Victor and Ksenik, Eugen and Lange, Michael and Marquardt, Pascal and Passenberg, Felix Constantin and Quantius, Dominik and Schneider, Anton and Seibert, Fabienne Monique and Siemer, Martin and Theil, Stephan and Tsakyridis, Georgios and Wendel, Niklas and Wippermann, Torben and Witte, Lars (2024) Snatching a probe of a genuine Near-Earth Asteroid: Fast sample return opportunity in the frame of RAMSES mission scenario. USRA. Apophis T-5 Years Workshop, 2024-04-22 - 2024-04-23, Noordwijk, Netherlands. | ![]() |
Hillebrandt, Martin and Meyer, Sebastian and Stegmaier, Mareike and Straubel, Marco and Zander, Martin E. and Hühne, Christian (2023) Zero-G Deployment Testing of a New Rollable and Retractable Solar Array. In: AIAA SciTech 2023 Forum. 2023 AIAA Science and Technology Forum and Exposition (AIAA SciTech Forum), 2023-01-23 - 2023-01-27, Gaylord National Harbor, National Harbor, United States. ISBN 978-162410699-6. Volltext nicht online. |
Hillebrandt, Martin and Straubel, Marco and Zander, Martin E. and Hühne, Christian (2023) A Novel Rollable, Deployable and Retractable Solar Array Structure. 17th European Conference on Spacecraft Structures Materials and Environmental Testing, 2023-03-28 - 2023-03-30, Toulouse, France. Volltext nicht frei. | ![]() |
Hillebrandt, Martin and Straubel, Marco and Zander, Martin E. and Hühne, Christian (2024) A DEPLOYABLE AND RETRACTABLE FLEXIBLE BLANKET SOLAR ARRAY BASED ON A ROLLABLE TUBULAR COMPOSITE MAST. ECSSMET 2024, 2024-09-23 - 2024-09-27, Noordwijk, Niederlande. (In Press) Volltext nicht frei. | ![]() |
Hindersmann, Arne and Bäns, Constantin and Beyland, Lutz (2024) Infusion of Thick-Walled Fiber Metal Laminates with Aligned Holes in the Metal Foils. Journal of Composites Science. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/jcs8070278. ISSN 2504-477X. | ![]() |
Hühne, Christian (2022) Composite simulation in aviation. SIMVEC 2022, 2022-11-22 - 2022-11-23, Baden-Baden, Deutschland. Volltext nicht online. |
Hühne, Christian and Assing, Heiko (2022) Effizienter Leichtbau durch kontinuierliche Faserverbundfertigung. SIMVEC 2022, 2022-11-22 - 2022-11-23, Baden-Baden, Deutschland. Volltext nicht online. |
Jacob, Geo and Tuppatsch, Jens-Peter and Schmidt, Daniel and Pototzky, Alexander and Rodeck, Rebecca and Raddatz, Florian and Wende, Gerko (2024) Non-destructive testing of challenging aerospace structures. Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V., Bonn, 2024. Deutscher Luft- und Raumfahrtkongress 2024, Hamburg, 2024-09-30 - 2024-10-02, Hamburg. doi: 10.25967/630245. | ![]() |
Kappel, Erik (2023) Buckling of simply-supported rectangular Double-Double laminates. Composites Part C: Open Access. Elsevier. doi: 10.1016/j.jcomc.2023.100364. ISSN 2666-6820. | ![]() |
Kappel, Erik (2023) Einflüsse der Supportanzahl auf die Strukturanforderungen einer Flaperon Steuerfläche - (aktualisierte Fassung). DLR-Interner Bericht. DLR-IB-SY-BS-2023-89. Other. 31 S. Volltext nicht frei. | ![]() |
Kappel, Erik (2024) On the Double-Double Laminate Buckling Optimum for the 18-Panel 'Horse-Shoe' Reference Case. Journal of Composites Science. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/jcs8020077. ISSN 2504-477X. | ![]() |
Kappel, Erik (2024) Omni first-ply-failure envelopes - A conservative approach to assess laminate failure. Composites Part C: Open Access. Elsevier. doi: 10.1016/j.jcomc.2024.100460. ISSN 2666-6820. | ![]() |
Kappel, Erik (2024) On stacking-sequence independent bending properties of Double-Double laminates - A short communication. Composites and Advanced Materials. SAGE Publications. doi: 10.1177/26349833241237244. ISSN 0963-6935. | ![]() |
Kappel, Erik and Boose, Yannick and Mißbach, Mirko (2023) DOUBLE-DOUBLE Simplifying the Design and Manufacture of Composite Laminates Second Edition. In: Department of Aeronautice & Astronautics, Stanford University, 2023 ISBN 978-0-9819143-4-3. Volltext nicht frei. | ![]() |
Kappel, Erik and Boose, Yannick and Mißbach, Mirko (2024) A CAI study on transition zones of conventional and Double-Double laminates. Composites Part C: Open Access (100450). Elsevier. doi: 10.1016/j.jcomc.2024.100450. ISSN 2666-6820. | ![]() |
Kappel, Erik and Boose, Yannick and Mißbach, Mirko and Prussak, Robert (2024) SHAPE RECONSTRUCTION OF A BENT TAPERED COMPOSITE PANEL BASED ON STRAIN DATA CAPTURED WITH LUNA'S FIBER-OPTICAL-SENSOR SYSTEM (FOSS). [Other] (Unpublished) | ![]() |
Kappel, Erik and Boose, Yannick and Prussak, Robert and Kosmann, Jens (2023) On measuring laminate strains of a bent tapered Double-Double panel – Comparing strain data from an FE calculation, a high-resolution 3D camera system (ARAMIS) and a fiber-optical sensor system (FOSS). DLR-Interner Bericht. DLR-IB-SY-BS-2023-113. Other. 31 S. | ![]() |
Kappel, Erik and Steffen, Olaf and Buggisch, Manuel (2024) Making a multi-material leading edge for natural-laminar flow. [Other] | ![]() |
Kappel, Erik and Tsai, Stephen W. (2024) Double-Double laminates - A review on the status quo in spring 2024. [Other] | ![]() |
Koord, Josef (2023) Wasserstofftanks dauerhaft dicht - Permeation und Leckage auf dem Prüfstand. Other. Other. | ![]() |
Koord, Josef (2024) Design methodology for highly loaded composite bolted joints with local metal hybridization at low temperature. DLR-Forschungsbericht. DLR-FB-2024-11. Dissertation. Technische Universität Carolo-Wilhelmina zu Braunschweig. doi: 10.57676/mzxc-3158. | ![]() |
Koord, Josef and Beck, Roman (2024) Technologie im Test: Leckagesichere Wasserstofftanks dank Bulge-Prüfstand. Other. Other. | ![]() |
Koord, Josef and Hühne, Christian (2024) Effect of low temperature on interlaminar fracture toughness of multi-directional CFRP and CFRP-steel interfaces. Composites Part B Engineering. Elsevier. doi: 10.1016/j.compositesb.2024.111540. ISSN 1359-8368. | ![]() |
Koord, Josef and Hühne, Christian (2024) Bolt-bearing behavior of hybrid CFRP-steel laminates at low temperature. Journal of Composite Materials. Sage Publications. doi: 10.1177/00219983241262955. ISSN 0021-9983. | ![]() |
Koord, Josef and Prussak, Robert and Stefaniak, Daniel and Hühne, Christian (2023) Crack analysis in CFRP by means of fiber optical sensors. SAMPE Europe 23 Conference Madrid, 2023-10-03 - 2023-10-05, El Escorial. Volltext nicht online. |
Koord, Josef and Völkerink, Oliver and Petersen, Enno and Hühne, Christian (2023) Effect of low temperature on mode I and mode II interlaminar fracture toughness of CFRP-steel hybrid laminates. Composites Part B Engineering. Elsevier. doi: 10.1016/j.compositesb.2023.110773. ISSN 1359-8368. Volltext nicht online. |
Krause, Marco (2025) Untersuchung der Robustheit eines laminarerhaltenden Trennstellenkonzeptes im Rotorteststand. DLR-Interner Bericht. DLR-IB-SY-BS-2025-45. Bachelor's. Ostfalia Hochschule für Angewandte Wissenschaften. 50 S. | ![]() |
Kreikemeier, Janko and Völkerink, Oliver and Waimer, Matthias (2021) Design for MFFD-Longitudinal Joint and Cargo Container Characterization for Crash Applications. DLR-Interner Bericht. DLR-IB-SY-BS-2024-32. Project thesis. 98 S. Volltext nicht frei. | ![]() |
Krombholz, Christian and Behrens, Florian and Delisle, Dominik Peter Patrick and Denker, Björn and Grohmann, Yannis and Hein, Robert and Kolbe, Andreas and Meister, Sebastian and Nguyen, Chinh Duy and Torstrick-v.d.Lieth, Sven and Ückert, Christian (2024) DHiiP-AIR – Ablage- und Integrationstechnologien für RTM-Prozesse – Schlussbericht. DLR-Interner Bericht. DLR-IB-SY-SD-2024-75. Project thesis. 127 S. Volltext nicht frei. | ![]() |
Krombholz, Christian and Brohme, Lars and Delisle, Dominik Peter Patrick and Denker, Björn and Ückert, Christian (2020) NiFö - WiTo Abschlussbericht. DLR-Interner Bericht. DLR-IB-SY-SD-2024-76. Project thesis. 47 S. Volltext nicht frei. | ![]() |
Krüger, Wolf R. and Bramsiepe, Kjell and Quero-Martin, David and Goerttler, Andreas and Seidler, Ruben Bernhard and Dähne, Sascha and Künnecke, Sven Christian and Kiehn, Daniel and Kier, Thiemo and Wallace, Christian (2024) Design and Analysis of Technologies for Load Control. In: Deutscher Luft- und Raumfahrtkongress 2024. Deutscher Luft- und Raumfahrtkongress 2024, 2024-09-30 - 2024-10-02, Hamburg. doi: 10.25967/630076. | ![]() |
Krüger, Wolf R. and Handojo, Vega and Pülm, Sven and Geyr von Schweppenburg, Heiko and Kruse, Martin and Lüdeke, Heinrich and Streit, Thomas and Heinrich, Lars and Tönjes, Lennart and Wallace, Christian and Fezans, Nicolas and Süelözgen, Özge and Kier, Thiemo (2023) Lastabminderung und Strömungskontrolle für Performanceoptimierung eines Langstreckenflugzeugs im Projekt In-Fly-Tec. Deutscher Luft- und Raumfahrtkongress 2023, 2023-09-19 - 2023-09-21, Stuttgart, Deutschland. doi: 10.25967/610308. | ![]() |
Kumpf, Janine and Werthen, Edgar and Tönjes, Lennart (2023) Methodenvergleich für die Approximation von Gradienten eines Strukturlösers. DLR-Interner Bericht. DLR-IB-SY-BS-2023-141. Bachelor's. TU Clausthal. 60 S. | ![]() |
Kurz, Kilian and Dähne, Sascha (2023) Anbindung eines Lastanalyse Tools an das gradientenbasierte Strukturoptimierungstool lightworks. DLR-Interner Bericht. DLR-IB-SY-BS-2023-104. Student thesis. TU Braunschweig. 74 S. | ![]() |
Lange, Michael (2023) Chassis und Separationsmechanismus des IDEFIX-Rovers. Other. Other. | ![]() |
Lange, Michael and Baturkin, Volodymyr and Hühne, Christian and Mierheim, Olaf (2023) THERMAL CONDUCTIVITY CHARACTERIZATION OF A CFRP SINGLE-LAP JOINT. ECSSMET 2023, 2023-03-28 - 2023-03-30, Toulouse, Frankreich. | ![]() |
Lange, Michael and Grundmann, Jan Thimo and Ho, Tra-Mi and Hühne, Christian and Lange, Caroline and Mierheim, Olaf (2024) A family concept for small body lander structures based on MASCOT. In: European Conference on Spacecraft Structures, Materials and Environmental Testing 2024. ECSSMET 2024, 2024-09-23 - 2024-09-27, Noordwijk, Niederlande. | ![]() |
Laporte, Mathilde and Hippmann, Gerhard and Lüders, Caroline and Andres, Marcel (2024) Festigkeitsnachweis von Schienenfahrzeugwagenkästen durch flexible Mehrkörpersimulation und Betriebsfestigkeitsrechnung. ZEVrail - Zeitschrift für das gesamte System Bahn, 148 (10), pp. 408-413. Georg Siemens Verlag. ISSN 1618-8330. Volltext nicht online. |
Lobitz, Lennart and Traub, Hendrik and Overbeck, Mats and Bien, Maximilian and Heimbs, Sebastian and Hühne, Christian and Friedrichs, Jens and Horst, Peter (2023) Aircraft Wing Design for Extended Hybrid Laminar Flow Control. Aerospace. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/aerospace10110938. ISSN 2226-4310. | ![]() |
Lohuis, David and Traub, Hendrik and Hühne, Christian (2024) Mechanical testing of threaded inserts for additively manufactured sandwich panels with Gyroid core structures. Results in Materials. Elsevier. doi: 10.1016/j.rinma.2024.100543. ISSN 2590-048X. | ![]() |
Madabhushi Venkata, Swapan and Werthen, Edgar (2022) Development of a parametric schema for gradient-based optimization of composite wind turbines. DLR-Interner Bericht. DLR-IB-SY-BS-2023-150. Master's. TU München. 62 S. | ![]() |
Makiela, Patrick Adrian (2023) Einfluss von ausgewählten Fügeparametern auf das Versagensverhalten pastös verklebter Zentrifugalproben. DLR-Interner Bericht. DLR-IB-SY-BS-2023-60. Other. 41 S. Volltext nicht frei. | ![]() |
Makiela, Patrick Adrian (2024) Anwendung der Modellierungsstrategie des Restfestigkeitsmoduls aus dem Projekt JoinDT zur Bewertung einer Dreieckskonfiguration bei Überlappungsklebungen. DLR-Interner Bericht. DLR-IB-SY-BS-2024-146. Project thesis. 39 S. Volltext nicht frei. | ![]() |
Makiela, Patrick Adrian and Völkerink, Oliver (2023) Untersuchung des Einflusses großer Deformationen in Kontinuumsschädigungsmodellen auf die Abbildung des Phänomens der Lagenaufspaltung an Lochrändern in Faserverbundstrukturen. DLR-Interner Bericht. DLR-IB-SY-BS-2023-168. Master's. TU Braunschweig. 65 S. Volltext nicht frei. | ![]() |
Makiela, Patrick Adrian and Völkerink, Oliver and Kosmann, Jens and Schollerer, Martin and Holzhüter, Dirk and Hühne, Christian (2024) Validation of static residual strength analyses of fiber composite bonded joints. 21st European Conference on Composite Materials (ECCM21), 2024-07-02 - 2024-07-05, Nantes, Frankreich. | ![]() |
Mantei, Marius (2024) Implementierung und Bewertung einer gradientenbasierten Optimierung des HAP GFEM unter Verwendung des Optimierungsframeworks Lightworks zur Steigerung des Leichtbaupotentials der Primärstruktur. DLR-Interner Bericht. DLR-IB-SY-BS-2024-145. Master's. TU Braunschweig. 47 S. Volltext nicht frei. | ![]() |
Mantei, Marius and Schollerer, Martin and Niemann, Steffen (2023) Steigerung des Leichtbaupotentials einer Hochfliegenden Plattform (HAP) mittels Implementierung von Optimierungsalgorithmen bei der numerischen Holmauslegung. DLR-Interner Bericht. DLR-IB-SY-BS-2023-61. Student thesis. TU Braunschweig. 36 S. Volltext nicht frei. | ![]() |
Meyer, Patrick and Finder, John Martin and Hühne, Christian (2023) Test Methods for the Mechanical Characterization of Flexure Hinges. Experimental Mechanics. Springer. doi: 10.1007/s11340-023-00982-7. ISSN 0014-4851. | ![]() |
Meyer, Patrick and Hühne, Christian and Bramsiepe, Kjell and Krüger, Wolf R. (2023) Aeroelastic Analysis of Actuated Adaptive Wingtips Based on Pressure Actuation. Journal of Aircraft. American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/1.C037390. ISSN 1533-3868. | ![]() |
Meyer, Patrick and Sprengholz, Moritz and Traub, Hendrik and Hühne, Christian (2024) Adaptive-Stiffness Characteristics of Pneumatic Rotary Actuators for Folding Wingtips. In: ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2024. ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2024, 2024-04-29 - 2024-05-01, Renton, USA. doi: 10.1115/SSDM2024-121566. ISBN 978-079188774-5. | ![]() |
Meyer, Patrick and Vorhof, Michael and Koord, Josef and Sennewald, Cornelia and Hühne, Christian (2023) Anisotropic flexure hinges: Manufacturing and mechanical characterization for application in pressure-actuated morphing structures. Composites Part B Engineering. Elsevier. doi: 10.1016/j.compositesb.2023.110967. ISSN 1359-8368. Volltext nicht online. |
Meyer zu Westerhausen, Sören and Kyriazis, Alexander and Hühne, Christian and Lachmeyer, Roland (2024) Design methodology for optimal sensor placement for cure monitoring and load detection of sensor-integrated, gentelligent composite parts. Proceedings of the Design Society. Cambridge University Press. doi: 10.1017/pds.2024.70. ISSN 2732-527X. | ![]() |
Mierheim, Olaf and Lange, Michael and Meyer, Sebastian and Kosmann, Jens and Hühne, Christian (2024) STRUCTURAL PART STIFFNESS TEST IN COMPARISON TO THE FE-PREDICTION. A TEST COMBINING CONTINUOUS STRUCTURE WITH COMPLEX INTERFACES. In: European Conference on Spacecraft Structures, Materials and Environmental Testing 2024. European Conference on Spacecraft Structures, Materials and Environmental Testing, 2024-09-23 - 2024-09-27, Noordwijk, Niederlande. | ![]() |
Mierheim, Olaf and Meyer, Sebastian and Lange, Michael and Huehne, Christian (2023) Verification of the MMX MECSS Insert Gluing Concept, a Combination of Epoxy and RTV Glue. ECSSMET 2023, 2023-03-28 - 2023-03-30, Toulouse. Volltext nicht frei. | ![]() |
Misol, Malte and Pototzky, Alexander and Lütjens, Klaus and Timmer, Maurice (2023) Schlussbericht des Vorhabens "EFFEKT - Effiziente Kabine durch digitale Vernetzung von Technologien und Systeme". Project Report. 55 S. doi: 10.2314/KXP:1919501509. | ![]() |
Monthe Tchegna, Billy Dimitri (2024) Analyse einer 2D-Wärmestromverteilung in einer geklebten Überlappungsverbindung. DLR-Interner Bericht. DLR-IB-SY-BS-2024-193. Master's. Hochschule Hannover. 64 S. | ![]() |
Niemann, Steffen and Schollerer, Martin and Gesell, Thomas and Nolte, Lukas and Mantei, Marius and Bärschneider, Andreas and Hanke, Michael (2023) DIMENSIONIERUNG UND DURCHFÜHRUNG EINES ULTIMATE-LOAD TESTS DER FLÜGELSTRUKTUR DES HAP-ALPHA. Deutscher Luft- und Raumfahrtkongress 2023, 2023-09-19 - 2023-09-21, Stuttgart, Deutschland. Volltext nicht frei. | ![]() |
Overbeck, Mats and Heimbs, Sebastian and Kube, Jan and Hühne, Christian (2024) Energy Absorption Properties of 3D-Printed Polymeric Gyroid Structures for an Aircraft Wing Leading Edge. Aerospace. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/aerospace11100801. ISSN 2226-4310. | ![]() |
Pape, Florian (2025) Lokalisation von Rissen in strukturellen Klebverbindungen mittels faseroptischer Sensoren. DLR-Interner Bericht. DLR-IB-SY-BS-2025-40. Bachelor's. FH Aachen. 64 S. | ![]() |
Pignede, Antoine Francois Xavier and Buse, Fabian and Grundmann, Jan Thimo and Reershemius, Siebo and Patscheider, Hagen and Wippermann, Torben and Lange, Michael and Mierheim, Olaf and Meyer, Sebastian (2024) MMX Rover MECSS - Separation from the Mothership: Multibody Simulation Analysis of the Ejection. The 7th International Conference on Multibody System Dynamics (IMSD), 2024-06-09 - 2024-06-13, Madison, WI, USA. | ![]() |
Pignede, Antoine Francois Xavier and Buse, Fabian and Grundmann, Jan Thimo and Reershemius, Siebo and Patscheider, Hagen and Wippermann, Torben and Lange, Michael and Mierheim, Olaf and Meyer, Sebastian (2025) MMX Rover MECSS - Separation from the Mothership: Multibody Simulation Analysis of the Ejection. Multibody System Dynamics. Springer. doi: 10.1007/s11044-025-10076-y. ISSN 1384-5640. | ![]() |
Porte, Tim (2025) Verbindungskonzepte fur segmentierte Rotorblätter von Windenergieanlagen mit hochtragfähigen Bolzenverbindungen. Bachelor's, Technische Universität Berlin. Volltext nicht frei. | ![]() |
Pototzky, Alexander and Zerbst, David (2024) Neuartige, strukturintegierte und lasttragende ESN-Versteifungselemente. DEUTSCHER LUFT- UND RAUMFAHRTKONGRESS 2024, 2024-09-30 - 2024-10-02, Hamburg. (Unpublished) | ![]() |
Pototzky, Alexander and Zerbst, David and Schmidt, Daniel (2024) Leichte Strukturen, starke Verbindungen: Das Elektrische-System-Netzwerk in multifunktionaler Bauweise. Other. Other. | ![]() |
Reinke, Ricardo (2024) Entwicklung eines Tools zur Generierung von Flügelkasten-Layouts auf Basis von CPACS. DLR-Interner Bericht. DLR-IB-SY-BS-2024-184. Student thesis. TU Braunschweig. 75 S. | ![]() |
Reisener, Fabian (2024) Untersuchung von Anbindungskonzepten eines Klappmechanismus am hochgestreckten Flügel und Ableitung von Randbedingungen für den Flügelentwurf. DLR-Interner Bericht. DLR-IB-SY-BS-2024-137. Project thesis. TU Dresden. 91 S. Volltext nicht frei. | ![]() |
Rennen, Philipp and Gantner, Stefan and Rothe, Tom and Baz, Bilal and Nana, Serge and Lombois-Burger, Hélène and Hühne, Christian and Hack, Norman (2024) Structural Evaluation of Shotcrete 3D Printing and Robotic Fiber Winding for Thin Shell Elements. IASS 2024 Symposium, 2024-08-25 - 2024-08-30, Zürich, Schweiz. | ![]() |
Richter, Martin and Fernandez, Juan M. and Straubel, Marco and Zander, Martin E. and Salazar, Joshua E. and Chamberlain, Matthew K. (2023) Experimental methods using force application of a single boom for a 500-m²-class solar sail. In: AIAA SciTech 2023 Forum. AIAA Scitech 2023 Forum, 2023-01-23 - 2023-01-27, National Harbor, MD, USA. doi: 10.2514/6.2023-0938. ISBN 978-162410699-6. | ![]() |
Roloff, Thomas and Froböse, Jörn and Hühne, Christian and Sinapius, Michael (2024) Reducing Artefacts in FRF-based Damage Detection Using Novel Mode Extraction Approach for Guided Ultrasonic Waves. In: 11th European Workshop on Structural Health Monitoring, EWSHM 2024. 11th European Workshop on Structural Health Monitoring, EWSHM 2024, 2024-06-10 - 2024-06-13, Potsdam, Deutschland. | ![]() |
Rosenbrock, Lennart (2024) Experimentelle Untersuchungen von sensierten zähmodifizierten Klebverbindungen mittels faseroptischer Messtechnik (FOSS) bei Faserverbundwerkstoffen. DLR-Interner Bericht. DLR-IB-SY-BS-2024-8. Student thesis. TU Braunschweig. 61 S. | ![]() |
Rothe, Tom and Pösch, Julia and Gantner, Stefan and Hack, Norman and Hühne, Christian (2023) Optimization of Tensile Properties and Bond Behaviour to Concrete of Fibre Reinforcement Strands Produced Within a Dynamic Fibre Winding Process. 11th International Conference On FRP Composites In Civil Engineering (CICE 2023), 2023-07-23 - 2023-03-26, Rio de Janeiro, Brasilien. | ![]() |
Rädel, Martin and Denker, Björn and van de Kamp, Bram and Liebers, Nico and Prussak, Robert (2025) Towards the validation of manufacturing simulations by means of digital twins: conception, implementation and data acquisition for a composite aircraft moveable manufacturing process. CEAS Aeronautical Journal. Springer. ISSN 1869-5582. Volltext nicht frei. | ![]() |
Rädel, Martin and Lefevre, Jean and Schuster, Andreas (2024) Virtual Manufacturing Validation Data in Composite Production. 1st VMAP User Meeting 2024, 2024-02-14 - 2024-02-15, Sankt Augustin, Deutschland. Volltext nicht online. |
Sahyoun, Dominic and Mißbach, Mirko and Radestock, Martin (2024) Design of an aileron for a high-aspect ration wing with active flutter control. Deutscher Luft- und Raumfahrtkongress 2024, 2024-09-30 - 2024-10-02, Hamburg, Deutschland. Volltext nicht frei. | ![]() |
Schmidt, Daniel and Haase, Thomas and Dreher, Patrik Nikolas and Beerhorst, Matthias and Kreikemeier, Janko (2016) Preliminary Document on Future Fuselage Architecture. DLR-Interner Bericht. DLR-IB-SY-BS-2024-18. Project thesis. 35 S. Volltext nicht frei. | ![]() |
Schollerer, Martin (2023) Steigerung der Robustheit von strukturellen Verklebungen in der Luftfahrt mittels lokaler Oberflächenzähmodifikation. Verteidigung der Promotion, 2023-09-14, Deutschland. | ![]() |
Schollerer, Martin (2024) Steigerung der Robustheit von strukturellen Verklebungen in der Luftfahrt mittels lokaler Oberflächenzähmodifikation. DLR-Forschungsbericht. DLR-FB-2024-5. Dissertation. Technische Universität Braunschweig. doi: 10.57676/5fb5-dr68. | ![]() |
Schollerer, Martin and Hühne, Christian (2024) Anwendung von AD-Plasma bei lokal oberflächenzähmodifizierten Klebverbindungen für die Luftfahrt. 47. ak-adp Workshop, 2024-11-13 - 2024-11-14, Jena, Deutschland. | ![]() |
Schollerer, Martin and Kosmann, Jens and Holzhüter, Dirk and Makiela, Patrick Adrian and Völkerink, Oliver and Hühne, Christian (2024) Local Surface Toughening – A boltless crack stopping technology for aerospace structures. ECCM21, 2024-07-02 - 2024-07-05, Nantes, Frankreich. doi: 10.60691/yj56-np80. | ![]() |
Schollerer, Martin and Kreissig, Florian and Gesell, Thomas and Niemann, Steffen and Hühne, Christian (2023) Steigerung der Robustheit von strukturellen Klebungen mittels Surface Toughening am Beispiel HAP. Deutscher Luft- und Raumfahrtkongress 2023, 2023-09-19 - 2023-09-21, Stuttgart. | ![]() |
Schäfer, David (2023) Development and Experimental Verification of an In-Space Manufacturing System for Composite Truss Structures. DLR-Interner Bericht. DLR-IB-SY-BS-2024-67. Master's. RWTH Aachen. 136 S. Volltext nicht frei. | ![]() |
Schäfer, David (2024) AMoCSiS: A Flexible Approach for Building Large and Stiff Structures in Space. 75th International Astronautical Congress (IAC), 2024-10-14 - 2024-10-18, Mailand. | ![]() |
Sprengholz, Moritz and Meyer, Patrick and Traub, Hendrik and Hühne, Christian (2024) Zero Stiffness in Bellow-Type Soft Pneumatic Actuators for Modal Analysis of Flexible Aircraft Wings. In: ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2024. ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2024, 2024-04-29 - 2024-05-01, Renton, USA. doi: 10.1115/SSDM2024-121625. ISBN 978-079188774-5. Volltext nicht online. |
Steffen, Olaf (2023) Clean Sky 2 NACOR Laminar Nacelle Access Door Demonstrator. DLR-Interner Bericht. DLR-IB-SY-BS-2023-42. Project thesis. 34 S. Volltext nicht frei. | ![]() |
Steffen, Olaf and Meyer, Patrick and Hühne, Christian (2024) Natural laminar flow leading edge: Requirements, design, and experimental validation under operational loads. Aerospace Science and Technology (146). Elsevier. doi: 10.1016/j.ast.2024.108913. ISSN 1270-9638. | ![]() ![]() |
Straubel, Marco and Bauda, Constantin and Hillebrandt, Martin and Pouillet, Laury and Sauvage, Antoine and Sautereau, Clara and Nutter, Andrew and Zander, Martin E. (2024) Ground Deployment Testing of 4x4m Solar Sail Demonstrator. ECSSMET 2024 - European Conference On Spacecraft Structures, Materials And Environmental Testing, 2024-09-23 - 2024-09-27, Noordwijk, Niederlande. Volltext nicht frei. | ![]() |
Straubel, Marco and Hillebrandt, Martin (2023) Advanced Interface Concepts for Rollable Composite Space Booms under Test in Artificial Weightlessness. In: AIAA SciTech 2023 Forum. SciTech 2023, 2023-01-23 - 2023-01-27, Washington D.C., USA. doi: 10.2514/6.2023-0583. ISBN 978-162410699-6. | ![]() |
Straubel, Marco and Hillebrandt, Martin (2023) 0G TESTING OF ALTERNATIVE BOOM ROOT INTERFACE CONCEPTS FOR ROLLABLE COMPOSITE BOOMS. European Conference on Spacecraft Structures Materials and Environmental Testing (ECSSMET) 2023, 2023-03-28 - 2023-03-30, Toulouse, Frankreich. | ![]() |
Straubel, Marco and Hillebrandt, Martin and Zander, Martin E. (2023) Modular and Scalable Boom Deployment Mechanism for Deployment and Retraction of up to Four CTMs. International Space Sailing Symposium, 2023-06-05 - 2023-06-09, New York, USA. (Unpublished) Volltext nicht online. |
Strzalka, Carsten (2023) Untersuchungen zur modalen Superposition für die a priori Detektion versagenskritischer Regionen dynamisch beanspruchter Strukturen. Dissertation. | ![]() |
Stumpf, Xenia Sophia and Treptow, Jessica Marie and Nehls, Grace (2024) R&D projects, additively functionalized part demonstrate composites innovation. CompositesWorld. Gardner Business Media, Inc.. ISSN 2376-5232. | ![]() |
Traub, Hendrik and Kube, Jan and Jose, Siby and Prasannakumar, Adarsh and Hühne, Christian (2024) Structural and Aerodynamic Characteristics of Micro-Perforated Porous Sheets for Laminar Flow Control. In: ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2024. ASME 2024 Aerospace Structures, Structural Dynamics, and Materials Conference, SSDM 2024, 2024-04-29 - 2024-05-01, Renton, USA. doi: 10.1115/SSDM2024-121620. ISBN 978-079188774-5. | ![]() |
Traub, Hendrik and Sprengholz, Moritz and Teufel, Daniel and Hühne, Christian (2023) Structural-mechanical characterisation of triply periodic minimal surface sheet networks: simulation and experiment. In: AIAA SciTech 2023 Forum. AIAA SciTech Forum, 2023-01-23 - 2023-01-27, National Harbor, USA. doi: 10.2514/6.2023-2076. ISBN 978-162410699-6. Volltext nicht frei. | ![]() |
Ucan, Hakan and Nguyen, Chinh Duy and Denker, Björn and Haschenburger, Anja and Kühn, Alexandra and Hein, Robert and Kühn, Michael and Liebers, Nico and Kappel, Erik and Prussak, Robert (2023) LEITWERK - VTP Multispar, Zwischenbericht 2022. DLR-Interner Bericht. DLR-IB-SY-SD-2023-51. Project thesis. 72 S. Volltext nicht frei. | ![]() |
Ucan, Hakan and Pototzky, Alexander and Bäns, Constantin and Hindersmann, Arne (2024) Funktionsintegrierte und hybride Bauweisen für zukünftige Rumpfsegmente. Other. Other. | ![]() |
Völkerink, Oliver and Koord, Josef and Petersen, Enno and Hühne, Christian (2023) Comparison of Continuum Shell and Solid Element-Based Modeling Strategies for Mesoscale Progressive Damage Analysis of Fiber Composites. Mechanics of Composite Materials, 59 (2), pp. 219-238. Springer. doi: 10.1007/s11029-023-10093-y. ISSN 0191-5665. | ![]() |
Völkerink, Oliver and Schollerer, Martin and Kosmann, Jens and Holzhüter, Dirk and Hühne, Christian (2023) Static residual strength analysis of fibre composite bonded joints after impact and fatigue using mesoscale progressive damage analysis. 7th International Conference on Engineering Against Failure 2023, 2023-06-21 - 2023-06-23, Spetses, Griechenland. Volltext nicht online. |
Völkerink, Oliver and Schollerer, Martin and Kosmann, Jens and Holzhüter, Dirk and Hühne, Christian (2023) Static residual strength analysis of fibre composite bonded joints after impact and fatigue using mesoscale progressive damage analysis. International Conference of Engineering Against Failure, 2023-06-21 - 2023-06-23, Spetses, Griechenland. Volltext nicht frei. | ![]() |
Wagner, Ronald and Hühne, Christian (2024) On the imperfection sensitivity and design of buckling critical wind turbine towers. Thin-Walled Structures. Elsevier. doi: 10.1016/j.tws.2024.112577. ISSN 0263-8231. | ![]() |
Weis, Laurena (2023) Thermal analysis of the heating area of a thermoplastic welding unit under space environment. Master's, Technische Universität Braunschweig. Volltext nicht online. |
Werthen, Edgar (2024) Windkraftanlagen > Wolkenkratzer? Design für Rotorblätter > 150 m. Other. Other. | ![]() |
Werthen, Edgar and Hardt, Daniel and Balzani, Claudio and Hühne, Christian (2024) Comparison of different cross-sectional approaches for the structural design and optimization of composite wind turbine blades based on beam models. Wind Energy Science, 9 (7), pp. 1465-1481. Copernicus Publications. doi: 10.5194/wes-9-1465-2024. ISSN 2366-7443. | ![]() |
Werthen, Edgar and Ribnitzky, Daniel and Kühn, Martin and Hühne, Christian (2023) Aero-structural coupled optimization of a rotor blade for an upscaled 25 MW reference wind turbine. In: Book of Abstracts, pp. 120-121. EAWE PHD Seminar 2023, 2023-09-06 - 2023-09-08, Hannover. (Unpublished) | ![]() |
Werthen, Edgar and Ribnitzky, Daniel and Zerbst, David and Hühne, Christian and Kühn, Martin (2023) Aero-structural coupled optimization of a rotor blade for an upscaled 25 MW reference wind turbine. Journal of Physics: Conference Series, 2626 (012012). Institute of Physics (IOP) Publishing. doi: 10.1088/1742-6596/2626/1/012012. ISSN 1742-6588. | ![]() |
Westphal, Kolja (2024) A new laminate blending recovery method for the design of composite structures. DLR-Interner Bericht. DLR-IB-SY-BS-2024-88. Master's. Hochschule für Angewandte Wissenschaften Hamburg. 79 S. | ![]() |
Wiedemann, Johannes and Meyer, Patrick and Feder, Julia and Sinapius, Johannes Michael and Riemenschneider, Johannes and Hühne, Christian (2024) Electromechanical Deicing of Helicopter Structures with Integrated Ice Detection by Impedance Measurement. Journal of Aerospace Engineering, 37 (1). American Society of Civil Engineers. doi: 10.1061/JAEEEZ.ASENG-5131. ISSN 0893-1321. Volltext nicht online. |
Wiedemann, Johannes and Mrzljak, Selim and Hühne, Christian and Walther, Frank (2024) Increased accuracy of service life prediction for fiber metal laminates by consideration of the manufacturing-induced residual stress state. In: 11th European Workshop on Structural Health Monitoring, EWSHM 2024. NDT.net. 11th European Workshop on Structural Health Monitoring (EWSHM 2024), 2024-06-10 - 2024-06-13, Potsdam, Deutschland. doi: 10.58286/29832. | ![]() |
Wiedemann, Johannes and Mrzljak, Selim and Hühne, Christian and Walther, Frank (2024) Increased Accuracy of Service Life Prediction for Fiber Metal Laminates by Consideration of the Manufacturing-Induced Residual Stress State. 11th European Workshop on Structural Health Monitoring (EWSHM 2024), 2024-06-10 - 2024-06-13, Potsdam, Deutschland. | ![]() |
Wiedemann, Johannes and Mrzljak, Selim and Koord, Josef and Hühne, Christian and Walther, Frank (2024) Modified cure cycles for increased fatigue performance of fiber metal laminates. Composite Structures. Elsevier. doi: 10.1016/j.compstruct.2024.118631. ISSN 0263-8223. | ![]() |
Wiedemann, Johannes and Pittsyk, Tetiana and Völkerink, Oliver and Hühne, Christian (2024) Temperature distribution inside composite and fiber metal laminates during modified cure cycles. 3rd CIRP Conference on Composite Material Parts Manufacturing, 2024-09-25 - 2024-09-27, Braunschweig. Deutschland. doi: 10.1016/j.procir.2024.10.333. ISSN 2212-8271. | ![]() |
Wiese, Tim and Werthen, Edgar (2023) Design of a sustainable rotor blade for wind turbines. DLR-Interner Bericht. DLR-IB-SY-BS-2023-140. Master's. FH Kärnten. 81 S. Volltext nicht online. |
Wille, Tobias and Bogenfeld, Raffael Marius and Schuster, Andreas and Dähne, Sascha and Wunderlich, Tobias (2024) Enhanced damage tolerance allowables for improved composite wing sizing. 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2024), 2024-06-03 - 2024-06-07, Lissabon, Portugal. | ![]() |
Wunderlich, Tobias (2025) oLAF - Ergebnisse der multidisziplinären Flügeloptimierung, Projektbericht Version 1.0. DLR-Interner Bericht. DLR-IB-AS-BS-2025-25. DLR-Institut für Aerodynamik und Strömungstechnik. 194 S. | ![]() |
Wunderlich, Tobias and Dähne, Sascha (2024) Multidisciplinary optimization of load adaptive wings for highly efficient long-haul airliners. In: The 9th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS Congress 2024. The 9th European Congress on Computational Methods in Applied Sciences and Engineering, 2024-06-03 - 2024-06-07, Lisbon, Portugal. doi: 10.23967/eccomas.2024.095. | ![]() |
Zander, Martin E. (2021) Robustness Assessment of Deployable Gossamer Structural Space Systems. Dissertation, Technischen Universität Braunschweig. | ![]() |
Zander, Martin E. and Chamberlain, Matthew K. and Jost, Dominic and Müller, Daniel R. and Hagmeister, Niels and Straubel, Marco (2023) Design and Testing of the BionicWingSat in a Zero-g Flight Campaign - A 2U-CubeSat with Deployable, BiologicallyInspired Wings. In: AIAA SciTech 2023 Forum. AIAA Scitech 2023 Forum, 2023-01-23 - 2023-01-27, National Harbor, MD, USA. doi: 10.2514/6.2023-2697. ISBN 978-162410699-6. | ![]() |
Zander, Martin E. and Chamberlaine, Matthew K. and Jost, Dominic and Müller, Daniel R. and Straubel, Marco (2023) ZERO-G EXPERIMENTS OF THE BIONICWINGSAT - A 2U-CUBESAT WITH DEPLOYABLE, BIOLOGICALLY-INSPIRED WINGS. 17th ECSSMET European Conference on Spacecraft Structures Materials and Environmental Testing, 2023-03-28 - 2023-03-30, Toulouse, France. | ![]() |
Zerbst, David (2022) Entwicklung einer virtuellen Prozesskette zur rechnergestützten Simulation der Umformung von textilkaschierten Holzoberflächen dekorativer Bauteile im Fahrzeug-Innenraum. Dissertation, Technische Universität Dresden. | ![]() |
Zerbst, David and Dähne, Sascha (2023) Flügel leicht gemacht - Composite Design für klimaneutrale Flugzeuge. Other. Other. | ![]() |
Zerbst, David and Tönjes, Lennart and Dähne, Sascha and Werthen, Edgar and Kappel, Erik and Hühne, Christian (2024) Equivalent plate formulation of Double-Double laminates for the gradient-based design optimization of composite structures. Composite Structures (354), p. 118786. Elsevier. doi: 10.1016/j.compstruct.2024.118786. ISSN 0263-8223. | ![]() |
Zerbst, David and Tönjes, Lennart and Ückert, Christian and Dähne, Sascha and Werthen, Edgar and Kappel, Erik and Hühne, Christian (2023) Gradient-based Design Optimization of Composite Structures using Double-Double Laminates. 13th EASN International Conference, 2023-09-05 - 2023-09-08, Salerno, Italien. Volltext nicht online. |