Items where Subject is "Institute of Materials Research > Metallic Structures and Hybrid Material Systems"

ASGHAR, Z. and REQUENA, G. and SKET, F. (2015) Multiscale tomographic analysis of heterogeneous cast Al-Si-X alloys. Journal of Microscopy, 259 (1), pp. 1-9. Wiley. doi: 10.1111/jmi.12241. ISSN 1365-2818. Volltext nicht online.

Alfaro Mercado, Ulises (2011) Microstructure, mechanical behavior and corrosion properties of friction stir welded aluminum alloys used in the aerospace industry. Vortrag Dissertation , 2011-05-06, Dissertation an der RWTH Aachen. (Submitted) Volltext nicht online.

Alfaro Mercado, Ulises and Biallas , Gerhard (2010) Incipient Melting and Corrosion Properties of Friction Stir Welded AA2024 T3 Joints. 12th International Conference on Aluminium Alloys (ICAA 12), 2010-09-05 - 2010-09-09, Yokohama, Japan. ISBN 978-4-905829-11-9. Volltext nicht online.

Alfaro Mercado, Ulises and Besel, Michael and Breitbarth, Eric and Dreßler, Ulrike and Requena, Guillermo (2018) Metallic fuselage lifetime and testing (MetLife) - Schlussbericht. DLR-Interner Bericht. IB-334-01/18. doi: 10.2314/GBV:1018584943.

Alfaro Mercado, Ulises and Besel, Michael and Dresbach, Christian and Dreßler, Ulrike and Landgraf, Florian and Reh, Stefan and Schwinn, Julian (2015) Manufacturing and Testing for Next Generation Metallic Fuselage Structures (MTEXT) - Schlussbericht. DLR-Interner Bericht, Project Report. IB 334-01/15. 95 S.

Alfaro Mercado, Ulises and Breitbarth, Eric and Dreßler, Ulrike and Requena, Guillermo (2022) Damage Tolerant Metallic Fuselage -DaTMet-. Project Report. 70 S.

Alfaro Mercado, Ulises and Requena, Guillermo and Sket, Federico and Wilde, Fabian (2017) Determination of damage mechanisms and damage evolution in Fiber Metal Laminates containing friction stir welded thin foils. Werkstoff Woche, 2017-09-27 - 2017-09-29, Dresden, Deutschland. Volltext nicht frei.

Alfaro Mercado, Ulises and Sket, Federico and Wilde, Fabian and Besel, Michael and Requena, Guillermo (2019) Determination of damage mechanisms and damage evolution in fiber metal laminates containing friction stir welded thin foils. International Journal of Materials Research. Carl Hanser Verlag. doi: 10.3139/146.111815. ISSN 1862-5282. Volltext nicht online.

Alfeld, Matthias and Wahabzada, Mirwaes and Bauckhage, Christian and Kersting, Kristian and Wellenreuther, Gerd and Barriobero-Vila, Pere and Requena, Guillermo and Boesenberg, Ulrike and Falkenberg, Gerald (2016) Non-negative matrix factorization for the near real-time interpretation of absorption effects in elemental distribution images acquired by X-ray fluorescence Imaging. Journal of Synchrotron Radiation. Wiley. doi: 10.1107/S1600577515023528. ISSN 1600-5775. Volltext nicht frei.

Altenbach, Holm and Dresbach, Christian and Petzold, Matthias (2012) Characterizing the anisotropic hardening behavior of aluminum bonding wires. In: Advanced Structured Materials, 16. Springer Verlag Berlin Heidelberg. pp. 583-598. doi: 10.1007/978-3-642-22700-4_36. ISBN 978-3-642-22700-4. ISSN 1869-8433. Volltext nicht online.

Artzt, Katia and Haubrich, Jan and Requena, Guillermo (2017) Selective Laser Melting of CuCr1Zr. EUROMAT 2017, 2017-09-17 - 2017-09-22, Thessaloniki, Griechenland. Volltext nicht online.

Artzt, Katia and Requena, Guillermo and Kasperovich, Galina and Kitsche, Wolfgang and Siggel, Martin and Kleinert, Jan and Haubrich, Jan (2018) SLM manufacturing of a Ti6Al4V turbo-pump impeller for a rocket engine: built strategy, processing, material and surfaces. Advanced additive Manufacturing Symposium AAMS18, 2018-09-03, Sheffield, GB.. Volltext nicht online.

Artzt, Katia Juliane and Barriobero Vila, Pere and Gussone, Joachim and Bauer, Peter-Philipp and Kasperovich, Galina and Löbbecke, Miriam and Requena, Guillermo and Riccius, Jörg and Suslov, Dmitry and Hümbert, Simon and Haubrich, Jan (2021) Additive Manufacturing of Components for Rocket Propulsion. IRAS Additive Manufacturing Workshop, 2021-07-05, Virtual. Volltext nicht online.

Artzt, Katia Juliane and Barriobero Vila, Pere and Gussone, Joachim and Kasperovich, Galina and Requena, Guillermo and Haubrich, Jan (2020) Laser Powder Bed Fusion of Ti-6Al-4V Manufacturing of a shrouded Impeller. Aditiva Querétaro 2020, 2020, virtuell. Volltext nicht online.

Artzt, Katia Juliane and Bauer, Peter-Philipp and Gussone, Joachim and Kasperovich, Galina and Barriobero Vila, Pere and Requena, Guillermo and Haubrich, Jan and Kitsche, Wolfgang and Riccius, Jörg and Suslov, Dmitry and Kleinert, Jan and Rosauer, Philipp and Siggel, Martin and Hümbert, Simon (2022) Metal Additive Manufacturing of Space Components @ DLR. 1st international conference on advanced manufacturing for air, space and land transportation, 2022-03-07 - 2022-03-11, online event. Volltext nicht online.

Artzt, Katia Juliane and Kitsche, Wolfgang and Gussone, Joachim and Bauer, Peter-Philipp and Requena, Guillermo and Haubrich, Jan (2019) Additive manufacturing of a Ti-6Al-4V turbo-pump impeller for a rocket engine. Euromat 2019, 2019-09-01 - 2019-09-05, Stockholm, Schweden. Volltext nicht online.

Artzt, Katia Juliane and Kitsche, Wolfgang and Gussone, Joachim and Bauer, Peter-Philipp and Requena, Guillermo and Haubrich, Jan (2019) Additive Fertigung eines Ti-6Al-4V Turbopumpen-Impellers für ein Raumfahrt-Raketentriebwerk. Werkstoffwoche, 2019-09-18 - 2019-09-20, Dresden, Deutschland. Volltext nicht online.

Artzt, Katia Juliane and Mishurova, Tatiana and Bauer, Peter-Philipp and Gussone, Joachim and Barriobero Vila, Pere and Evsevleev, Sergei and Bruno, Giovanni and Kasperovich, Galina and Requena, Guillermo and Haubrich, Jan (2021) Characterization methods for additive manufacturing: Influence of processing strategies on residual stresses, microstructure and defects in AM materials and components. Workshop on additive manufacturing, 2021-06-01 - 2021-06-03, online.

Artzt, Katia Juliane and Mishurova, Tatiana and Bauer, Peter-Philipp and Gussone, Joachim and Barriobero Vila, Pere and Evsevleev, Sergei and Bruno, Giovanni and Requena, Guillermo and Haubrich, Jan (2020) Pandora’s Box–Influence of Contour Parameters on Roughness and Subsurface Residual Stresses in Laser Powder Bed Fusion of Ti-6Al-4V. Materials, 13 (15), p. 3348. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/ma13153348. ISSN 1996-1944. Volltext nicht frei.

Artzt, Katia Juliane and Riccius, Jörg and Siggel, Martin and Kleinert, Jan and Requena, Guillermo and Haubrich, Jan (2019) Selective Laser Melting of CuCr1Zr – Process studies with in-situ monitoring. Euromat 2019, 2019-09-01 - 2019-09-05, Stockholm, Schweden. Volltext nicht online.

Artzt, Katia Juliane and Riccius, Jörg and Siggel, Martin and Kleinert, Jan and Requena, Guillermo and Haubrich, Jan (2019) From single melt tracks to large components - influence of process parameters and geometry on the Selective Laser Melting process of CuCr1Zr. Alloys for Additive Manufacturing Symposium AAMS 2019, 2019-09-18 - 2019-09-20, Göteborg, Schweden. Volltext nicht online.

Artzt, Katia Juliane and Riccius, Jörg and Siggel, Martin and Kleinert, Jan and Requena, Guillermo and Haubrich, Jan (2019) Additive Fertigung und in-situ Schmelzbad-Überwachung von CuCr1Zr. Werkstoffwoche, 2019-09-18 - 2019-09-20, Dresden, Deutschland. Volltext nicht online.

Artzt, Katia Juliane and Siggel, Martin and Kleinert, Jan and Riccius, Joerg and Requena, Guillermo and Haubrich, Jan (2020) Pyrometric-Based Melt Pool Monitoring Study of CuCr1Zr Processed Using L-PBF. Materials, 13 (20), p. 4626. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/ma13204626. ISSN 1996-1944. Volltext nicht frei.

Atzler, Fynn and Raps, Lukas and Freund, Jonathan and Tröger, Samuel and Hümbert, Simon (2023) Bonding of Low-Melting Polyaryletherketone onto Polyamide 6: A Concept for Molds for Automated Fiber Placement. Journal of Composites Science. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/jcs7090371. ISSN 2504-477X.

Barriobero Vila, Pere and Artzt, Katia and Stark, Andreas and Schell, Norbert and Siggel, Martin and Gussone, Joachim and Kleinert, Jan and Kitsche, W. and Requena, Guillermo and Haubrich, Jan (2020) Mapping the geometry of Ti-6Al-4V: From martensite decomposition to localized spheroidization during selective laser melting. Scripta Materialia, 182 (-), pp. 48-52. Elsevier. doi: 10.1016/j.scriptamat.2020.02.043. ISSN 1359-6462. Volltext nicht frei.

Barriobero Vila, Pere and Bugelnig, Katrin and Vallejos, Juan Manuel and Gussone, Joachim and Silva-Reyes, Kenneth and Villanova, Julie and Stark, Andreas and Schell, Norbert and Haubrich, Jan and Requena, Guillermo (2021) Real-time monitoring of additive manufacturing alloys. EUROPEAN CONGRESS AND EXHIBITION ON ADVANCED MATERIALS AND PROCESSES - EUROMAT 2021, 2021-09-13 - 2021-09-17, Graz, Austria. Volltext nicht online.

Barriobero Vila, Pere and Jerez-Mesa, Ramón and Guitar, Augustina and Gavalda-Diaz, Oriol and Travieso-Rodríguez, Jose Antonio and Stark, Andreas and Schell, Norbert and Llumà, Jordi and Fargas, Gemma and Mateo, Antonio and Roa, Joan Josep (2021) Deformation kinetics of a TRIP steel determined by in situ high-energy synchrotron X-ray diffraction. Materialia (101251). Elsevier. doi: 10.1016/j.mtla.2021.101251. ISSN 2589-1529.

Barriobero Vila, Pere and Vallejos, Juan Manuel and Gussone, Joachim and Haubrich, Jan and Kelm, Klemens and Stark, Andreas and Schell, Norbert and Requena, Guillermo (2021) Interface-Mediated Twinning-Induced Plasticity in a Fine Hexagonal Microstructure Generated by Additive Manufacturing. Advanced Materials. Wiley. doi: 10.1002/adma.202105096. ISSN 0935-9648.

Barriobero-Vila, Pere and Biancardi Oliveira, Verona and Schwarz, Sabine and Buslaps, Thomas and Requena, Guillermo (2017) Tracking the αʺ martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloy. Acta Materialia, 135, pp. 132-143. Elsevier. doi: 10.1016/j.actamat.2017.06.018. ISSN 1359-6454. Volltext nicht online.

Barriobero-Vila, Pere and Gussone, Joachim and Haubrich, Jan and Sandlöbes, Stefanie and Da Silva, Julio and Cloetens, Peter and Schell, Norbert and Requena, Guillermo (2017) Inducing Stable α + β Microstructures during Selective Laser Melting of Ti-6Al-4V Using Intensified Intrinsic Heat Treatments. Materials, 10 (3), pp. 1-14. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/ma10030268. ISSN 1996-1944. Volltext nicht online.

Barriobero-Vila, Pere and Gussone, Joachim and Kelm, Klemens and Haubrich, Jan and Stark, Andreas and Schell, Norbert and Requena, Guillermo (2018) An in situ investigation of the deformation mechanisms in a β-quenched Ti-5Al-5V-5Mo-3Cr alloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 717, pp. 134-143. Elsevier. doi: 10.1016/j.msea.2018.01.077. ISSN 0921-5093. Volltext nicht online.

Barriobero-Vila, Pere and Requena, Guillermo and Buslaps, Thomas and Alfeld, Matthias and Boesenberg, Ulrike (2015) Role of element partitioning on the α–β phase transformation kinetics of a bi-modal Ti–6Al–6V–2Sn alloy during continuous heating. Journal of Alloys and Compounds, 626, pp. 330-339. Elsevier. doi: 10.1016/j.jallcom.2014.11.176. ISSN 0925-8388. Volltext nicht online.

Barriobero-Vila, Pere and Requena, Guillermo and Schwarz, Sabine and Warchomicka, Fernando and Buslaps, Thomas (2015) Influence of phase transformation kinetics on the formation of α in a β-quenched Ti–5Al–5Mo–5V–3Cr–1Zr alloy. Acta Materialia, 95, pp. 90-101. Elsevier. doi: 10.1016/j.actamat.2015.05.008. ISSN 1359-6454. Volltext nicht online.

Barriobero-Vila, Pere and Requena, Guillermo and Warchomicka, Fernando and Stark, Andreas and Schell, Norbert and Buslaps, Thomas (2015) Phase transformation kinetics during continuous heating of a β-quenched Ti–10V–2Fe–3Al alloy. Journal of Materials Science, 50 (3), pp. 1412-1426. Springer. doi: 10.1007/s10853-014-8701-6. ISSN 0022-2461. Volltext nicht online.

Bartha, Kristína and Stráský, Josef and Barriobero Vila, Pere and Šmilauerová, Jana and Doležal, Petr and Veselý, Jozef and Semenova, Irina and Polyakova, Veronika and Janeček, Miloš (2021) In-situ investigation of phase transformations in ultra-fine grained Ti15Mo alloy. Journal of Alloys and Compounds, 867. Elsevier. doi: 10.1016/j.jallcom.2021.159027. ISSN 0925-8388.

Bauer, Peter-Philipp (2017) Materialuntersuchungen an additiv gefertigtem Ti-6Al-4V Mikrostruktur, Oberflächenqualitäten und mechanische Eigenschaften. Master's, Karlsruher Institut für Technologie. Volltext nicht online.

Bauer, Peter-Philipp and Klamann, Lisa Marie and Swadzba, Radoslaw and Haubrich, Jan (2023) The development of Nb Si core-shell powders for Laser-based Powder Bed Fusion. Alloys for Additive Manufacturing, 2023-09-27 - 2023-09-29, Madrid, Spain. Volltext nicht online.

Bauer, Peter-Philipp and Klamann, Lisa Marie and Swadzba, Radoslaw and Laska, Nadine (2022) Effect of Si Content on Deposition and High-Temperature Oxidation of Al-Si Coatings Obtained by Magnetron Sputtering PVD Method. Coatings. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/coatings12060859. ISSN 2079-6412.

Bauer, Peter-Philipp and Swadzba, Radoslaw and Klamann, Lisa Marie and Laska, Nadine (2022) Aluminum diffusion inhibiting properties of Ti5Si3 at 900 °C and its beneficial properties on Al-rich oxidation protective coatings on γ-TiAl. Corrosion Science. Elsevier. doi: 10.1016/j.corsci.2022.110265. ISSN 0010-938X.

Bayerbasi, Tolga Johannes (2015) Gezielte Makro- und Nanostrukturierung von Titan 15-3-3-3 mittels Laser für adhäsive Fügeprozesse. Bachelor's, Institut für Werkstoff-Forschung/Hochschule Aachen. Volltext nicht online.

Becker, Andreas (2017) Untersuchung der Anbindungs- und Alterungsmechanismen an laservorbehandelten Fügeflächen: Einfluss der Legierungselemente und der Polymereigenschaften. Master's, Universität Koblenz, Hochschule Koblenz. Volltext nicht online.

Besel, Michael (2012) Werkstoff-Mechanik für die Luftfahrt. Vorlesung Universität Kassel, Wintersemester 2011/2012, Kassel. Volltext nicht online.

Besel, Michael and Besel, Yasuko and Alfaro Mercado, Ulises and Kakiuchi, Toshifumi and Uematsu, Yoshihiko (2015) Fatigue behavior of friction stir welded Al–Mg–Sc alloy. International Journal of Fatigue, 77, pp. 1-11. Elsevier. doi: 10.1016/j.ijfatigue.2015.02.013. ISSN 0142-1123. Volltext nicht online.

Besel, Michael and Breitbarth, Eric (2016) Advanced analysis of crack tip plastic zone under cyclic loading. International Journal of Fatigue. Elsevier. doi: 10.1016/j.ijfatigue.2016.08.013. ISSN 0142-1123. Volltext nicht online.

Besel, Yasuko and Besel, Michael and Alfaro Mercado, Ulises and Kakiuchi, Toshifumi and Uematsu, Yoshihiko (2015) Influence of joint line remnant on crack paths under static and fatigue loading in friction stir welded Al‐Mg‐Sc alloy. In: Fracture and Structural Integrity, Vol. 29 (2016). The Fifth International Conference on Crack Paths (CP 2015), 2015-09-16 - 2015-09-18, Ferrara, Italy. Volltext nicht online.

Biallas, Gerhard and Alfaro-Mercado, Ulises and Sauer, Heinz Willi (2010) Similar and Dissimilar T-Joints Made from 2024-T3 Cover Sheet. 8th International Symposium on Friction Stir Welding, 2010-05-18 - 2010-05-20, Timmendorfer Strand, Deutschland. Volltext nicht online.

Biallas, Gerhard and Ostersehlte, Hartmut and Dreßler, Ulrike (2010) Repair of Defective FSW Butt Joints. In: Proc. 8th International Symposium on Friction Stir Welding, 18.-20. Mai 2010, Timmendorfer Strand. 8th International Symposium on Friction Stir Welding, 2010-05-18 - 2010-05-20, Timmendorfer Strand, Deutschland. Volltext nicht online.

Bode, Felix (2023) Nutzung von künstlichen neuronalen Netzen zur Segmentierung und Auflösungsverbesserung von Synchrotron-Tomographiedaten. Master's, Universität Stuttgart. Volltext nicht online.

Breitbarth, Eric (2017) Mechanismenorientierte bruchmechanische Charakterisierung von Luftfahrtlegierungen unter realitätsnahen Beanspruchungen. Dissertation, RWTH Aachen. Volltext nicht online.

Breitbarth, Eric (2023) Anwendung von digitaler Bildkorrelation und algorithmenbasierter Auswertemethoden in der experimentellen Mechanik. DVM-Fortbildungsseminar "Experimentelle Methoden der Bruchmechanik", 2023-02-13, Darmstadt. Volltext nicht frei.

Breitbarth, Eric and Besel, Michael (2016) Crack tip strain field under cyclic loading in aluminium alloy. International Conference on Fatigue Damage of Structural Materials XI, 2016-09-18 - 2016-09-23, Hyannis, USA. Volltext nicht online.

Breitbarth, Eric and Besel, Michael (2017) Energy based analysis of crack tip plastic zone of AA2024-T3 under cyclic loading. International Journal of Fatigue. Elsevier. doi: 10.1016/j.ijfatigue.2017.03.029. ISSN 0142-1123. Volltext nicht online.

Breitbarth, Eric and Besel, Michael (2018) Fatigue crack deflection in cruciform specimens subjected to biaxial loading conditions. International Journal of Fatigue. Elsevier. doi: 10.1016/j.ijfatigue.2018.04.021. ISSN 0142-1123.

Breitbarth, Eric and Besel, Michael (2019) Einfluss der T-Spannung auf das Rissablenkungsverhalten von biaxial belasteten Aluminiumblechen aus dem Luftfahrtbereich. DVM AG Mixed Mode, 2019-07-09, Darmstadt. Volltext nicht frei.

Breitbarth, Eric and Besel, Michael and Reh, Stefan (2018) Biaxial testing of cruciform specimens representing characteristics of a metallic airplane fuselage section. International Journal of Fatigue. Elsevier. doi: 10.1016/j.ijfatigue.2017.12.005. ISSN 0142-1123. Volltext nicht online.

Breitbarth, Eric and Besel, Michael and Schwinn, Julian (2018) Testing of fatigue cracks under biaxial loading conditions to represent conditions of a metallic aircraft fuselage section. International Conference of Engineering Against Failure V, 2018-06-20 - 2018-06-22, Chios, Griechenland. Volltext nicht online.

Breitbarth, Eric and Bugelnig, Katrin and Requena, Guillermo (2022) Bruchmechanische Bewertungsmöglichkeiten bei der simulationsbasierten Zertifizierung von Flugzeugrumpfstrukturen. Deutscher Luft- und Raumfahrtkongress (DLRK) 2022, 2022-09-27 - 2022-09-29, Dresden. Volltext nicht frei.

Breitbarth, Eric and Bugelnig, Katrin and Strohmann, Tobias and Melching, David and Paysan, Florian and Haubrich, Jan and Gussone, Joachim and Requena, Guillermo (2023) Strategies to accelerate the design, discovery, development and deployment of materials in the era of the digital transformation. 4th International Conference on Materials Science & Nanotechnology, 2023-10-25, Valencia, Spain. Volltext nicht frei.

Breitbarth, Eric and Melching, David (2023) Anwendung der symbolischen Regression in der Bruchmechanik. DVM Mixed Mode AG, 2023-07-07, Kassel. Volltext nicht frei.

Breitbarth, Eric and Paysan, Florian and Dietrich, Eric and Melching, David and Strohmann, Tobias and Schöne, Vanessa and Dömling, Ferdinand (2023) Embedding robotics into experimental mechanics to enable AI-driven knowledge discovery. DLR Materials Colloquium 2023, 2023-12-05, Köln. Volltext nicht frei.

Breitbarth, Eric and Paysan, Florian and Strohmann, Tobias and Melching, David and Dömling, Ferdinand and Schöne, Vanessa and Dietrich, Eric and Schultheis, Erik and Requena, Guillermo (2023) Future laboratory for advanced mechanical testing. 34th Advanced Aerospace Materials and Processes (AeroMat) Conference and Exposition, 2023-03-14 - 2023-03-16, Fort Worth, TX, USA. Volltext nicht frei.

Breitbarth, Eric and Paysan, Florian and Strohmann, Tobias and Melching, David and Dömling, Ferdinand and Schöne, Vanessa and Dietrich, Eric and Schultheis, Erik and Requena, Guillermo (2023) Accelerating Materials Development and Testing with Autonomous AI-Powered Systems. ODAS2023: Advances in Artificial Intelligence for Aerospace Engineering, 2023-05-30, Paris, France. Volltext nicht frei.

Breitbarth, Eric and Paysan, Florian and Strohmann, Tobias and Melching, David and Dömling, Ferdinand and Schöne, Vanessa and Dietrich, Eric and Schultheis, Erik and Requena, Guillermo (2023) AI-powered Research in Mechanical Testing and Validation. 5th Materials Chain International Conference – MCIC 2023, 2023-08-31, Bochum, Germany. Volltext nicht frei.

Breitbarth, Eric and Paysan, Florian and Strohmann, Tobias and Melching, David and Requena, Guillermo (2022) An automated high-fidelity fatigue crack growth testing environment. 1st International Conference on Advanced Manufacturing for Air, Space and Land Transportation, 2022-03-07 - 2022-03-10, online. Volltext nicht frei.

Breitbarth, Eric and Paysan, Florian and Strohmann, Tobias and Melching, David and Requena, Guillermo (2022) An automated high-resolution digital image correlation system for capturing fatigue crack growth mechanisms. BSSM - 16th International Conference on Advances in Experimental Mechanics, 2022-09-06 - 2022-09-08, Oxford, UK. Volltext nicht frei.

Breitbarth, Eric and Strohmann, Tobias (2020) Advanced crack growth analysis with smart algorithms based on digital image correlation. Werkstoff-Kolloquium, 2020-12-01, online, Köln. Volltext nicht frei.

Breitbarth, Eric and Strohmann, Tobias and Besel, Michael (2019) Einsatz digitaler Bildkorrelation in der Bruchmechanik. DVM. 51. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 2019-02-19 - 2019-02-20, Aachen. ISSN 2366-4797. Volltext nicht frei.

Breitbarth, Eric and Strohmann, Tobias and Besel, Michael (2019) Characterisation of crack tip fields utilizing digital image correlation. Fifth IJFatigue & FFEMS Joint Workshop - Characterisation of Crack Tip Fields, 2019-04-08 - 2019-04-10, Heidelberg. Volltext nicht frei.

Breitbarth, Eric and Strohmann, Tobias and Requena, Guillermo (2019) Experimentelle und numerische Untersuchung hochbeanspruchter Ermüdungsrisse im Luftfahrtbereich. Werkstoffwoche 2019, 2019-09-18 - 2019-09-20, Dresden. Volltext nicht frei.

Breitbarth, Eric and Strohmann, Tobias and Requena, Guillermo (2020) High-stress fatigue crack propagation in thin AA2024-T3 sheet material. Fatigue & Fracture of Engineering Materials & Structures, 43 (11), pp. 2683-2693. Wiley. doi: 10.1111/ffe.13335. ISSN 8756-758X.

Breitbarth, Eric and Strohmann, Tobias and Requena, Guillermo (2021) Cost-efficient testing of highly loaded fatigue cracks in aerospace alloys under realistic fuselage loading conditions supported by intelligent algorithms. 32nd Advanced Aerospace Materials and Processes (AeroMat) Conference, 2021-05-24 - 2021-05-26, online, Canada. Volltext nicht frei.

Breitbarth, Eric and Strohmann, Tobias and Starostin-Penner, Denis (2021) Experimentelle Ermittlung komplexer Rissfortschrittsdaten mittels smarter Algorithmen und digitaler Bildkorrelation. 53. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit, 2021-02-18 - 2021-02-19, online. doi: 10.48447/Br-2021-012. Volltext nicht frei.

Breitbarth, Eric and Zaefferer, Stefan and Archie, Fady and Besel, Michael and Raabe, Dierk and Requena, Guillermo (2018) Evolution of dislocation patterns inside the plastic zone introduced by fatigue in an aged aluminium alloy AA2024-T3. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. Elsevier. doi: 10.1016/j.msea.2018.01.068. ISSN 0921-5093. Volltext nicht online.

Bugelnig, Katrin and Barriobero Vila, Pere and Breitbarth, Eric and Strohmann, Tobias and Gussone, Joachim and Silva, K. and Villanova, Julie and Stark, Andreas and Schell, Norbert and Haubrich, Jan and Requena, Guillermo (2022) 4D microstructure evolution in Titanium Alloys for Additive Manufacturing. ICTMS 2022, 2022-06-27 - 2022-07-01, Grenoble, Frankreich. Volltext nicht frei.

Bugelnig, Katrin and Barriobero Vila, Pere and Breitbarth, Eric and Strohmann, Tobias and Gussone, Joachim and Villanova, Julie and Stark, Andreas and Schell, Norbert and Silva, K. and Haubrich, Jan and Requena, Guillermo (2022) 4D microstructure evolution in a Titanium Alloy for Additive Manufacturing. AK Röntgentomographie, 2022-05-05, virtuell. Volltext nicht online.

Bugelnig, Katrin and Barriobero Vila, Pere and Breitbarth, Eric and Strohmann, Tobias and Silva, K. and Haubrich, Jan and Villanova, Julie and Schell, Norbert and Stark, Andreas and Requena, Guillermo (2022) 4D microstructure evolution in titanium alloys tailored for additive manufacturing. MSE 2022, 2022-09-27 - 2022-09-29, Darmstadt.

Bugelnig, Katrin and Barriobero Vila, Pere and Requena, Guillermo (2018) Synchrotron Computer Tomography as a Characterization Method for Engineering Materials. Praktische Metallographie-Practical Metallography, 55 (8), pp. 556-568. Carl Hanser Verlag. doi: 10.3139/147.110534. ISSN 0032-678X. Volltext nicht online.

Bugelnig, Katrin and Germann, Holger and Steffens, Thomas and Koos, Robert and Boller, Elodie and Wilde, Fabian and Requena, Guillermo (2023) 3D investigation of damage during strain-controlled thermo-mechanical fatigue of cast Al-Si alloys. Advanced Engineering Materials. Wiley. doi: 10.1002/adem.202300339. ISSN 1438-1656.

Bugelnig, Katrin and Germann, Holger and Steffens, Thomas and Plank, Bernhard and Wilde, Fabian and Boller, Elodie and Requena, Guillermo (2018) Optimized Segmentation of the 3D Microstructure in Cast Al-Si Piston Alloys. Praktische Metallographie-Practical Metallography, 55 (4), pp. 223-243. Carl Hanser Verlag. doi: 10.3139/147.110509. ISSN 0032-678X. Volltext nicht online.

Bugelnig, Katrin and Germann, Holger and Steffens, Thomas and Sket, Federico and Adrien, Jerome and Maire, Eiric and Boller, Elodie and Requena, Guillermo (2018) Revealing the Effect of Local Connectivity of Rigid Phases during Deformation at High Temperature of Cast AlSi12Cu4Ni(2,3)Mg Alloys. Materials (11), pp. 1-18. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/ma11081300. ISSN 1996-1944.

Bugelnig, Katrin and Germann, Holger and Steffens, Thomas and Wilde, Fabian and Boller, Elodie and Requena, Guillermo (2017) Damage mechanisms and evolution during thermomechanical fatigue of cast near eutectic Al-Si piston alloys. Euromat 2017, 2017-09-17 - 2017-09-21, Thessaloniki, Griechenland. (Unpublished)

Bugelnig, Katrin and Germann, Holger and Steffens, Thomas and Wilde, Fabian and Requena, Guillermo (2022) 3D investigation of damage during strain-controlled thermo-mechanical fatigue of cast Al-Si alloys. MSE 2022, 2022-09-27 - 2022-09-29, Darmstadt.

Bugelnig, Katrin and Gussone, Joachim and Barriobero Vila, Pere and Haubrich, Jan and da Silva, Julio Cesar and Hecht, Ulrike and Sket, Federico and Gödeke, H. and Requena, Guillermo (2019) Ultrafine eutectic Ti-based Alloys for Additive Manufacturing. ESRF-EBS Coherence Workshop, 2019-09-09 - 2019-09-13, Grenoble, Frankreich. Volltext nicht online.

Bugelnig, Katrin and Gussone, Joachim and Gödeke, H. and Hecht, Ulrike and Sket, Federico and Spalt, Sebastian and Hinterer, A. and Gradinger, Rudolf and Upadhyay, Manas and Chen, Yunhui and da Silva, Julio Cesar and Lhuissier, Pierre and Rack, Alexander and Villanova, Julie and Boller, Elodie and Requena, Guillermo (2023) IN-SITU AND HIERARCHICAL INVESTIGATION OF ALLOYS AND COMPONENTS FOR ADDITIVE MANUFACTURING. AAMS2023, 2023-09-27 - 2023-09-29, Madrid, Spanien. Volltext nicht online.

Bugelnig, Katrin and Sket, Federico and Germann, Holger and Steffens, Thomas and Koos, Robert and Adrien, Jerome and Maire, Eiric and Wilde, Fabian and Boller, Elodie and Requena, Guillermo (2019) In-situ 3D imaging of damage processes in cast Al-Si piston alloys. DESY - Industry Satellite Meeting, 2019-01-24, Hamburg. Volltext nicht online.

Bugelnig, Katrin and Sket, Federico and Germann, Holger and Steffens, Thomas and Koos, Robert and Wilde, Fabian and Boller, Elodie and Requena, Guillermo (2018) Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing (709), pp. 193-202. Elsevier. doi: 10.1016/j.msea.2017.10.035. ISSN 0921-5093. Volltext nicht online.

Bugelnig, Katrin and Sket, Federico and Germann, Holger and Steffens, Thomas and Wilde, Fabian and Boller, Elodie and Requena, Guillermo (2016) 3D microstructure and damage accumulation in a cast AlSi12Cu5Ni2 piston alloy as a function of solution Treatment. In: NDT Database & Journal of Nondestructive Testing. 6th Conference on Industrial Computed Tomography, 2016-02-09 - 2016-02-12, Wels, Österreich.

Bugelnig, Katrin and Sket, Federico and Germann, Holger and Steffens, Thomas and Wilde, Fabian and Boller, Elodie and Requena, Guillermo (2018) In-situ determination of the influence of composition on the damage accumulation of Al-Si piston alloys. 16th Conference on Aluminum Alloys, 2018-06-17 - 2018-06-21, Montreal, Kanada. (Unpublished) Volltext nicht online.

Bugelnig, Katrin and Sket, Federico and Germann, Holger and Steffens, Thomas and Wilde, Fabian and Boller, Elodie and Requena, Guillermo (2018) In-situ determination of the influence of composition and test-temperature on the damage accumulation of Al-Si piston alloys. MSE Konferenz, 2018-09-26 - 2018-09-28, Darmstadt, Deutschland. (Unpublished) Volltext nicht online.

Bugelnig, Katrin and Steffens, Thomas and Germann, Holger and Wilde, Fabian and Requena, Guillermo (2022) Impact of Chemical Composition on 3D Elemental Distribution and Damage Behavior of Cast Al-Si Alloys. Microscopy and Microanalysis, 28 (S1), pp. 266-268. Cambridge University Press. doi: 10.1017/S1431927622001878. ISSN 1431-9276.

Bugelnig, Katrin and Strohmann, Tobias and Breitbarth, Eric and Requena, Guillermo (2019) Automatic segmentation of 3D synchrotron tomography using trained neural networks. Challenges and Opportunities of Digital Transformation in Fundamental Research with Photons and Neutrons Workshop, 2019-06-13 - 2019-06-14, Hamburg, Deutschland. Volltext nicht online.

Bugelnig, Katrin and Strohmann, Tobias and Tumminello, Silvana and Becker, Maike and Navarette, Nuria and Kolbe, Matthias and Ganzenmüller, Janis and Kargl, Florian and Requena, Guillermo (2023) High-throughput computational screening of secondary alloys from scrap metal mixtures. Werkstoff Kolloquium 2023, 2023-12-05, Köln, Deutschland. Volltext nicht online.

Bugelnig, Katrin and Wielenberg, Christoph and Chebab, Bechir and Shahani, Ravi and Haubrich, Jan and Pauzon, Camille and Martin, Guilhem and Lhuissier, Pierre and Villanova, Julie and Boller, Elodie and Requena, Guillermo (2023) 4D characterization of a new Aluminum Alloy for Additive Manufacturing. LightMat2023, 2023-06-21 - 2023-06-23, Trondheim, Norwegen. Volltext nicht online.

Bugelnig, Katrin and Wielenberg, Christoph and Chebab, Bechir and Shahani, Ravi and Haubrich, Jan and Pauzon, Camille and Martin, Guilhem and Lhuissier, Pierre and Villanova, Julie and Boller, Elodie and Requena, Guillermo (2023) 4D multiscale investigation of a new Aluminum Alloy for Additive Manufacturing. Euromat2023, 2023-09-03 - 2023-09-07, Frankfurt, Deutschland. Volltext nicht online.

Bugelnig, Katrin and Wielenberg, Christoph and Chebab, Bechir and Shahani, Ravi and Haubrich, Jan and Pauzon, Camille and Martin, Guilhem and Lhuissier, Pierre and Villanova, Julie and Boller, Elodie and Requena, Guillermo (2023) 4D investigation of an Aluminum alloy tailored for additive manufacturing. DGM AK Rötngentomographie, 2023-09-21, Dresden, Deutschland. Volltext nicht online.

Bugelnig, Katrin and Wielenberg, Christoph and Chebab, Bechir and Shahani, Ravi and Haubrich, Jan and Pouzon, Camille and Martin, Guilhem and Lhuissier, Pierre and Villanova, Julie and Requena, Guillermo (2022) 4D microstructure evolution in Aluminium Alloy for Additive Manufacturing. Microscopy and Microanalysis, 28 (S1), pp. 292-293. Cambridge University Press. doi: 10.1017/S1431927622001970. ISSN 1431-9276.

Bugelnig, Katrin and Wielenberg, Christoph and Chehab, Bechir and Shahani, Ravi and Haubrich, Jan and Pauzon, Camille and Martin, Guilhem and Lhuissier, Pierre and Villanova, Julie and Requena, Guillermo (2022) 4D investigation of new aluminium alloys tailored to additive manufacturing. DLR - Materials Colloquium, 2022-12-06, Köln. Volltext nicht online.

Burda, I. and Zweiacker, K. and Barriobero Vila, Pere and Stutz, A. and Koller, R. and Roelofs, H. and Oberli, L. and Lembke, M. and Affolter, C. and Leinenbach, C. (2022) Fatigue crack propagation behavior of a micro-bainitic TRIP steel. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. Elsevier. doi: 10.1016/j.msea.2022.142898. ISSN 0921-5093.

Buske, Clemens and Krumme, Alexander and Schmidt, Thomas and Dresbach, Christian and Zur, Sascha Andre and Tiefers, Rüdiger (2016) Distributed Multidisciplinary Optimization of a Turbine Blade Regarding Performance, Reliability and Castability. ASME Turbo Expo 2016, 2016-06-13 - 2016-06-17, Seoul, South Korea. doi: 10.1115/GT2016-56079. ISBN 978-0-7918-4971-2. Volltext nicht online.

Bönisch, Matthias and Barriobero Vila, P. and Dhekne, P. and Stark, Andreas and Schell, Norbert and Ungar, Tamas and Requena, Guillermo and Seefeldt, Marc (2023) Tension-compression asymmetry of metastable austenitic stainless steel studied by in-situ high-energy X-ray diffraction. International Journal of Plasticity, 170. Elsevier. doi: 10.1016/j.ijplas.2023.103767. ISSN 0749-6419.

Cabeza, S. and Mishurova, T. and Garcés, G. and Sevostianov, I. and Requena, G. and Bruno, G. (2017) Stress-induced damage evolution in cast AlSi12CuMgNi alloy with one- and two-ceramic reinforcements. Journal of Materials Science, 52 (17), pp. 10198-10216. Springer. doi: 10.1007/s10853-017-1182-7. ISSN 0022-2461. Volltext nicht frei.

Cabeza, Sandra and Mishurova, Tatiana and Bruno, Giovanni and Garcés, Gerardo and Requena, Guillermo (2016) The role of reinforcement orientation on the damage evolution of AlSi12CuMgNi +15% Al2O3 under compression. Scripta Materialia, 122, pp. 115-118. Elsevier. doi: 10.1016/j.scriptamat.2016.05.023. ISSN 1359-6462. Volltext nicht frei.

Canelo-Yubero, David and Etzlstorfer, C. and Koos, Robert and Germann, Holger and Steffens, Thomas and Stark, Andreas and Boller, Elodie and Requena, Guillermo (2020) Load partition during hot deformation of AlSi12 and AlSi10Cu6Ni2 alloys: a quantitative evaluation of the stiffness of Si networks. Journal of Materials Science. Springer. doi: 10.1007/s10853-020-05023-5. ISSN 0022-2461.

Canelo-Yubero, David and Requena, Guillermo and Sket, Federico and Poletti, Cecilia and Warchomicka, Fernando and Daniels, John and Schell, Norbert and Stark, Andreas (2016) Load partition and microstructural evolution during in situ hot deformation of Ti–6Al–6V–2Sn alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 657, pp. 244-258. Elsevier. doi: 10.1016/j.msea.2016.01.059. ISSN 0921-5093. Volltext nicht frei.

Chadwick, Ashley and Kotzur, Karola and Nowotny, Sebastian (2021) Moderation of thermoplastic composite crystallinity and mechanical properties through in situ manufacturing and post-manufacturing tempering: Part 1 - Mechanical characterisation. Composites Part A: Applied Science and Manufacturing, 143. Elsevier. doi: 10.1016/j.compositesa.2021.106286. ISSN 1359-835X. Volltext nicht online.

Delp, Alexander and Freund, Jonathan and Wu, Shuang and Löbbecke, Miriam and Haubrich, Jan and Tröster, Thomas and Walther, Frank (2022) Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties. Composite Structures, 285 (115238). Elsevier. doi: 10.1016/j.compstruct.2022.115238. ISSN 0263-8223.

Desch, Richard (2018) Untersuchungen zur Infiltration und Grenzflächenoptimierung von Titanmatrix-Verbundwerkstoffen. Master's, Hochschule Niederrhein. Volltext nicht online.

Doll, Georg and Kotzur, Karola and Horn, Matthias and Chadwick, Ashley and Herrmann, Peter and Steidinger, Katrin (2019) Cost-effective Out-of-Autoclave Manufacturing of Thermoplastic Panels for Aerospace Structures. SAMPE Europe, 2019-09-17 - 2019-09-19, Nantes, France. ISBN 9789082910117. Volltext nicht online.

Drees, Björn and Kaden, Markus and Kotzur, Karola and Löbbecke, Miriam and Doll, Georg and Simone, Manuel and Reifegerste, Karsten and Dreher, Patrik Nikolas (2020) Projekt MAKE: Untersuchungen von gasdicht beschichteten, tapegelegten Thermoplasten CF-PEEK und CF-PPS auf LH2-Permeabilität und Festigkeit in Hinblick auf eine Wandung eines kryogenen LH2 Tanks. DLR-Interner Bericht. DLR-IB-BT-ST-2020-190. DLR Stuttgart. 186 S. (Unpublished) Volltext nicht online.

Drees, Björn and Kotzur, Karola and Doll, Georg and Löbbecke, Miriam and Winkelmann, Peter (2020) Projekt Procomp: Vorarbeiten für einen kryogenen Wasserstofftank aus thermoplastischem CFK. DLR-Interner Bericht. DLR-IB-BT-ST-2020-119. DLR Stuttgart. 161 S. (Unpublished) Volltext nicht online.

Dresbach, Christian and Dreßler, Ulrike and Gussone, Joachim and Reh, Stefan (2013) Calculation of effective Young’s modulus distribution from electron backscatter diffraction results for stochastic analyses in aerospace applications. 7th International Conference on Advanced Computational Engineering and Experimenting ACE-X 2013, 2013-07-01 - 2013-07-04, Madrid, Spanien. Volltext nicht online.

Dresbach, Christian and Lorenz, Georg and Petzold, Matthias and Altenbach, Holm (2011) Analysis of Chip Damage Risk in Thermosonic Wire Bonding. Key Engineering Materials (478), pp. 75-80. Trans Tech Publications. doi: 10.4028/www.scientific.net/KEM.478.75. Volltext nicht online.

Dresbach, Christian and van Enkhuizen, Marinus Johannus and Alfaro Mercado, Ulises and Reh, Stefan (2013) Simulation des thermischen Verhaltens beim Reibrührschweißen zur Vorhersage von Eigenspannungen. In: Deutscher Luft- und Raumfahrtkongress. Deutscher Luft- und Raumfahrtkongress 2013, 2013-09-10 - 2013-09-12, Stuttgart. Volltext nicht online.

Dresbach, Christian (2014) Vorlesung "Festkörpermechanik", WS13/14, 4SWS. Vorlesung an der Hochschule Bonn-Rhein-Sieg, Pflichtfach in den Studiengängen "Chemie mit Materialwissenschaften" und "Naturwissenschaftliche Forensik", Rheinbach. Volltext nicht online.

Dresbach, Christian (2017) Vorlesung "Werkstoffe der Luft- und Raumfahrt", WPF im Fachbereich Angewandte Naturwissenschaften der Hochschule Bonn-Rhein-Sieg, WS16/17. [Other] Volltext nicht online.

Dresbach, Christian and Becker, Thomas and Reh, Stefan and Wischek, Janine and Zur, Sascha and Buske, Clemens and Schmidt, Thomas and Tiefers, Rüdiger (2016) A Stochastic Reliability Model for Application in a Multidisciplinary Optimization of a Low Pressure Turbine Blade Made of Titanium Aluminide. Latin American Journal of Solids and Structures (13), pp. 2316-2332. Brazilian Society of Mechanical Sciences and Engineering. doi: 10.1590/1679-78252521. ISSN 1679-7817. Volltext nicht online.

Dresbach, Christian and Buske, Clemens and Reh, Stefan and Schmidt, Thomas and Wischek, Janine and Zur, Sascha and Tiefers, Rüdiger (2015) A Stochastic Reliability Model for Application in a Multidisciplinary Optimization of a Low Pressure Turbine Blade made of Titanium Aluminide. 9th International Conference on Advanced Computational Engineering and Experimenting ACE-X, 2015-06-29 - 2015-07-02, München, Deutschland. Volltext nicht online.

Dresbach, Christian and Dreßler, Ulrike and Gussone, Joachim and Reh, Stefan (2014) Calculation of effective Young’s modulus distribution from electron backscatter diffraction results for stochastic analyses in aerospace applications. Materialwissenschaft und Werkstofftechnik, 45 (5), pp. 361-370. Wiley. doi: 10.1002/mawe.201400235. ISSN 0933-5137. Volltext nicht online.

Dresbach, Christian and van Enkhuizen, Marinus Johannus and Alfaro Mercado, Ulises and Reh, Stefan (2015) Simulation of thermal behavior during friction stir welding process for predicting residual stresses. CEAS Aeronautical Journal, 6 (2), pp. 271-278. Springer. doi: 10.1007/s13272-014-0145-9. ISSN 1869-5582. Volltext nicht online.

Dressler, Ulrike and Biallas, Gerhard and Alfaro Mercado, Ulises (2009) Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3. MaterialsScience and Engineering, 526 (1-2), pp. 113-117. Elsevier. doi: 10.1016/j.msea.2009.07.006. ISSN 0921-5093. Volltext nicht online.

Drewler, Lisabeth (2023) Einfluss der Kornstreckung auf das Bruchzähigkeitsverhalten einer freiformgeschmiedeten Aluminiumlegierung (AA7010-T7452). Master's, Hochschule Bonn-Rhein-Sieg. Volltext nicht frei.

Dömling, Ferdinand and Melching, David and Paysan, Florian and Schöne, Vanessa and Strohmann, Tobias and Breitbarth, Eric (2023) Numerische Analyse des Ermüdungsrissfortschritts in einem Winkelblech. AG Mixed Mode, 2023-07-07, Kassel. Volltext nicht frei.

Edtmaier, Christian and Requena, Guillermo (2015) 20th Symposium on Composites. Materials Science Forum, 825. Tras Tech Publications. doi: 10.4028/www.scientific.net/MSF.825-826. ISBN 978 3 03835 515 1. Volltext nicht online.

Evsevleev, Sergei and Cabeza, S. and Mishurova, Tatiana and Garcés, Gerardo and Sevostianov, I. and Requena, Guillermo and boin, M. and hofmann, michael (2020) Stress-induced damage evolution in cast AlSi12CuMgNi alloy with one and two ceramic reinforcements. Part II: Effect of reinforcement orientation. Journal of Materials Science. Springer. doi: 10.1007/s10853-019-04069-4. ISSN 0022-2461.

Fanara, Lida and Gwinner, Klaus and Martynchuk, Oleksii and Hänsch, Ronny and Schlegel, Anastasia and Ludwig, Jakob and Melching, David and Strohmann, Tobias and Weber, Holger and Krebs, Florian (2023) W2: How Certain and Why? Uncertainty Estimation and Explainable AI Applied on Mars Projects. In: Online Abstracts. AGU Annual Meeting, 2023-12-11 - 2023-12-15, San Francisco, USA. Volltext nicht online.

Fischer, Alexa (2023) Automatisierung eines Mixed-Mode-Rahmens für Rissfortschrittsversuche. Bachelor's, Technische Hochschule Köln. Volltext nicht frei.

Francke, Alexander (2020) Mikroanalytik der Titanlegierungen 2020 -DGM. Titanseminar der DGM, 2020-03-18 - 2020-03-19, Online-Konferenz.

Freund, Jonathan and Delp, Alexander and Wu, Shuang and Löbbecke, Miriam and Haubrich, Jan and Tröster, Thomas and Walther, Frank (2022) Investigations on the correlation of surface features and mechanical strength of laser-pretreated Al6082-T6 - epoxy E320 joints. Hybrid 2022, 2022-07-20 - 2022-07-22, Leoben, Österreich. Volltext nicht frei.

Freund, Jonathan and Löbbecke, Miriam and Delp, Alexander and Walther, Frank and Wu, Shuang and Tröster, Thomas and Haubrich, Jan (2023) Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints. Journal of Adhesion. Taylor & Francis. doi: 10.1080/00218464.2023.2223475. ISSN 0021-8464.

Freund, Jonathan and Lützenkirchen, Isabel and Löbbecke, Miriam and Delp, Alexander and Walther, Frank and Wu, Shuang and Tröster, Thomas and Haubrich, Jan (2023) Transferability of the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints. Journal of Composites Science, II (7(10)). Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/jcs7100427. ISSN 2504-477X.

Freund, Jonathan and Mantouvalou, Ioanna and Förste, Frank and Löbbecke, Miriam and Haubrich, Jan (2023) Water diffusion behaviour in the interface of laser-structured aluminium-epoxy adhesive joints. FEMS Euromat 2023, 2023-09-03 - 2023-09-07, Frankfurt am Main. Volltext nicht frei.

Garcés, Gerardo and Requena, Guillermo and Tolnai, Domonkos and Pérez, Pablo and Adeva, Paloma and Jiménez, José A. and Stark, Andreas and Schell, Norbert (2015) Thermal expansion behaviour of Long-Period Stacking Ordered (LPSO) phase. Revista de Metalurgía, 51 (2), e043. Centro Nacional de Investigaciones Metalurgicas. doi: 10.3989/revmetalm.043. ISSN 0034-8570. Volltext nicht online.

Garcés, Gerardo and Requena, Guillermo and Tolnai, Domonkos and Pérez, Pablo and Medina, Judit and Stark, Andreas and Schell, Norbert and Adeva, Paloma (2016) Formation of an 18R long-period stacking ordered structure in rapidly solidified Mg88Y8Zn4 alloy. Materials Characterization, 118, pp. 514-518. Elsevier. doi: 10.1016/j.matchar.2016.06.032. ISSN 1044-5803. Volltext nicht frei.

Gebhard, S. and Peters, P.W.M. and Roth-Fagaraseanu, D. and Turley, F. and Voggenreiter, H. (2010) Particle impact damage in the gamma based TiAl alloy TNBV3B produced via three different processing routes. MaterialsScience and Engineering, 527 (21-22), pp. 5883-5891. Elsevier. doi: 10.1016/j.msea.2010.05.072. ISSN 0921-5093. Volltext nicht online.

Gebhard, Susanne (2009) Titanaluminide. Titan-Workshop des DLR in Köln, 2009-06-04, Köln. Volltext nicht online.

Gebhard, Susanne (2011) Partikel-Impact an gamma-Titanaluminid-Legierungen. Dissertation, Universität Stuttgart. Volltext nicht online.

Gebhard, Susanne and Peters, Petrus and Turley, Felix and Roth-Fagaraseanu, Dan and Voggenreiter, Heinz (2009) Damage Evolution and Fatigue After Impact of the TiAl Alloy TNBV3B. TMS Annual Meeting 2009, 2009-02-15 - 2009-02-19, San Francisco, CA, USA. Volltext nicht online.

Gebhard, Susanne and Peters, Petrus and Turley, Felix and Roth-Fagaraseanu, Dan and Voggenreiter, Heinz (2009) The Effect of Impact on the TiAl Alloy TNBV3B Produced on Three Different Processing Routes. In: Materials Science Forum, Vol. 638-642, 1312 -1317. Trans tech Publications. Thermec 2009, 2009-08-25 - 2009-08-29, Berlin, Deutschland. (In Press) Volltext nicht online.

Gebhard, Susanne and Peters, Petrus and Turley, Felix and Roth-Fagaraseanu, Dan and Voggenreiter, Heinz (2009) Damage Evolution and Mechanical Properties After Impact of the TiAl Alloy TNBV3B. Eucomas 2009, 2009-07-01 - 2009-07-02, Augsburg, Deutschland. Volltext nicht online.

Gebhard, Susanne and Pyczak, Florian and Göken, Mathias (2009) Microstructural and micromechanical characterisation of TiAl alloys using atomic force microscopy and nanoindentation. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing (532), pp. 235-241. Elsevier. ISSN 0921-5093. Volltext nicht online.

Geier, Martin and Kohlgrüber, Dieter and Schwinn, Julian and Breitbarth, Eric (2016) Definition und Anwendung eines Lastenprozesses zur Ableitung realistischer Bauteiltests im DLR-Projekt iLoads. In: Deutscher Luft- und Raumfahrtkongress 2016. Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V.. Deutscher Luft- und Raumfahrtkongress 2016, 2016-09-13 - 2016-09-15, Braunschweig, Deutschland.

Gherekhloo, Human (2014) Microanalytical and Mechanical Investigation of Titanium Alumindes Produced by Selective Laser Melting at Elevated Temperatures. Diploma, RWTH Aachen. Volltext nicht online.

Goll, Florian (2014) In-situ-Herstellung von Titan-Aluminium-Legierungen mittels Selektivem Laserschmelzen. Master's, Ernst-Abbe-Hochschule Jena. Volltext nicht online.

Gussone, Joachim (2011) Schmelzflusselektrolytische Abscheidung von Titan auf Verstärkungsfasern zur Herstellung von Titanmatrixverbundwerkstoffen. Dissertation, RWTH Aachen. Volltext nicht online.

Gussone, Joachim (2012) Schmelzflusselektrolytische Abscheidung von Titan auf Verstärkungsfasern zur Herstellung von Titanmatrixverbundwerkstoffen. Dissertation, RWTH Aachen. Volltext nicht online.

Gussone, Joachim and Hausmann, Joachim (2009) Schmelzflusselektrolytische Faserbeschichtung als Basis für kostengünstige MMCs. Werkstoff-Kolloquium 2009, 2009-12-01, Köln. Volltext nicht online.

Gussone, Joachim and Hausmann, Joachim (2010) Electrodeposition of Titanium on SiC-Fibres for Metal Matrix Composite Production. Electrochemistry 2010: From microscopic, 2010-09-13 - 2010-09-15, Bochum. Volltext nicht online.

Gussone, Joachim and Hausmann, Joachim (2010) Electrolytic Deposition of Titanium on SiC-Fibres as First Step in Titanium Matrix Composite Production. Second International Round Table on Titanium Production in Molten Salts, 2010-09-19 - 2010-09-22, Trondheim. Volltext nicht online.

Gussone, Joachim and Hausmann, Joachim (2011) Deposition of titanium on SiC fibres from chloride melts. Journal of Applied Electrochemistry, 41, pp. 657-662. Springer. doi: 10.1007/s10800-011-0284-1. Volltext nicht online.

Gussone, Joachim and Hausmann, Joachim (2011) Electrolytic Production of Matrix Coated Fibres for Titanium Matrix Composites. Euromat 2011, 2011-09-12 - 2011-09-15, Montpellier. Volltext nicht online.

Gussone, Joachim and Hausmann, Joachim (2011) Kostenreduzierte Herstellung von Bauteilen aus intermetallischen Titanlegierungen auf Basis generativer und elektrolytischer Rapid-Verfahren – TigeR. InnoMateria 2011, 2011-03-15 - 2011-03-16, Köln. Volltext nicht online.

Gussone, Joachim and Hausmann, Joachim (2012) Tensile Properties and Microstructure of SiC Fibre Reinforced Multi Metal Matrix Composites. ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 2012-06-24 - 2012-06-28, Venedig, Italien. Volltext nicht online.

Gussone, Joachim and Hausmann, Joachim and Kasperovich, Galina and Merzouk, Tarik and Gherekhloo, Human and Reinhard, Christina (2012) Internal Stresses and Crack Initiation in SiC Fibre reinforced Multi Metal Matrix Composites. Synchrotron Users Meeting 2012, 2012-09-05 - 2012-09-06, Didcot, England. Volltext nicht online.

Gussone, Joachim and Kasperovich, Galina and Reinhard, Christina and Hausmann, Joachim (2013) Investigation of Crack Initiation and Internal Stresses in Multi Metal Matrix Composites by Synchrotron Radiation. Euromat 2013, 2013-09-09 - 2013-09-13, Sevilla. Volltext nicht online.

Gussone, Joachim and Bugelnig, Katrin and Barriobero Vila, Pere and Hecht, Ulrike and Sket, Federico and Stark, Andreas and Schell, Norbert and Da Silva, Julio Cesar and Cloetens, Peter and Gödeke, Holger and Haubrich, Jan and Requena, Guillermo (2020) Ultrafein-eutektische Ti-basierte Legierungen für die additive Fertigung. Fachtagung Werkstoffe und Additve Fertigung, 2020-05-13 - 2020-05-15, Online. Volltext nicht online.

Gussone, Joachim and Bugelnig, Katrin and Barriobero-Vila, Pere and da Silva, Julio Cesar and Hecht, Ulrike and Dresbach, Christian and Sket, Federico and Cloetens, Peter and Stark, Andreas and Schell, Norbert and Haubrich, Jan and Requena, Guillermo (2020) Ultrafine eutectic Ti-Fe-based alloys processed by additive manufacturing - A new candidate for high temperature applications. Applied Materials Today, 20, p. 100767. Elsevier. doi: 10.1016/j.apmt.2020.100767. ISSN 2352-9407.

Gussone, Joachim and Hagedorn, Yves-Christian and Gherekhloo, Human and Kasperovich, Galina and Merzouk, Tarik and Hausmann, Joachim (2015) Microstructure of γ-titanium aluminide processed by selective laser melting at elevated temperatures. Intermetallics, 66, pp. 133-140. Elsevier. doi: 10.1016/j.intermet.2015.07.005. ISSN 0966-9795. Volltext nicht online.

Gussone, Joachim and Hausmann, Joachim (2014) Electrolytic Production of Matrix Coated Fibres for Titanium Matrix Composites. In: Molten Salts Chemistry and Technology Wiley. pp. 319-329. ISBN 978-1-118-44873-1. Volltext nicht online.

Gussone, Joachim and Kasperovich, Galina and Haubrich, Jan and Requena, Guillermo (2018) Interfacial Reactions and Fracture Behavior of Ti Alloy-Ag28Cu Brazing Joints: Influence of Titanium Alloy Composition. Metals, 6 (10), p. 830. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/met8100830. ISSN 2075-4701.

Gussone, Joachim and Nitzsche, Lukas and Bugelnig, Katrin and Meyne, Jan and Turak, Ahmet and Sket, Federico and Pandey, Akshya and Hecht, Ulrike and Yan, Fuyao and Berglund, Ida and da Silva, Julio Cesar and Stark, Andreas and Schell, Norbert and Haubrich, Jan and Requena, Guillermo (2022) Ti-based alloys and refractory complex concentrated alloys for additive manufacturing. DLR Materials Colloquium, 2022-12-06, Cologne. Volltext nicht online.

Gussone, Joachim and Nitzsche, Lukas and Haubrich, Jan and Stark, Andreas and Schell, Norbert and Requena, Guillermo (2022) Processing of β-solidifying and peritectic titanium aluminides by laser powder bed fusion. Materials Science and Engineering MSE 2022, 2022-09-27 - 2022-09-29, Darmstadt. Volltext nicht online.

Gussone, Joachim and Rackel, Marcus Willi and Tumminello, Silvana and Barriobero Vila, Pere and Kreps, Frederic and Kelm, Klemens and Stark, Andreas and Schell, Norbert and Pyczak, Florian and Haubrich, Jan and Requena, Guillermo (2023) Laser powder bed fusion of Ti-22Al-25Nb at low and high pre-heating temperatures. FEMS EUROMAT 2023, 2023-09-03 - 2023-09-07, Frankfurt.

Gussone, Joachim and Rackel, Marcus Willi and Tumminello, Silvana and Barriobero Vila, Pere and Kreps, Frederic and Kelm, Klemens and Stark, Andreas and Schell, Norbert and Pyczak, Florian and Haubrich, Jan and Requena, Guillermo (2023) Microstructure formation during laser powder bed fusion of Ti-22Al-25Nb. AAMS 2023, 2023-09-27 - 2023-09-29, Madrid. Volltext nicht online.

Gussone, Joachim and Rackel, Marcus Willi and Tumminello, Silvana and Barriobero-Vila, Pere and Kreps, Frederic and Kelm, Klemens and Stark, Andreas and Schell, Norbert and Pyczak, Florian and Haubrich, Jan and Requena, Guillermo (2023) Microstructure formation during laser powder bed fusion of Ti-22Al-25Nb with low and high pre-heating temperatures. Materials & Design, 232, p. 112154. Elsevier. doi: 10.1016/j.matdes.2023.112154. ISSN 0264-1275.

Gussone, Joachim and Reinhard, Christina and Kasperovich, Galina and Gherekhloo, Human and Merzouk, Tarik and Hausmann, Joachim (2014) In-situ investigation of microcrack formation and strains in Ag–Cu-based multi-metal matrix composites analysed by synchrotron radiation. MaterialsScience and Engineering, 612, pp. 102-114. Elsevier. doi: 10.1016/j.msea.2014.06.018. ISSN 0921-5093. Volltext nicht online.

Gussone, Joachim and Stark, Andreas and Schell, Norbert and Requena, Guillermo and Haubrich, Jan (2019) Microstructure stability of beta-solidifying TiAl alloys produced by selective laser melting. EUROMAT 2019, 2019-09-02 - 2019-09-06, Stockholm, Schweden. Volltext nicht online.

Gussone, Joachim and Vijay, Chakradhar Reddy Yerragudi and Watermeyer, Philipp and Milicevic, Ksenija and Friedrich, Bernd and Haubrich, Jan (2020) Electrodeposition of titanium-vanadium alloys from chloride-based molten salts: influence of electrolyte chemistry and deposition potential on composition, morphology and microstructure. Journal of Applied Electrochemistry, 50 (3), pp. 355-366. Springer. doi: 10.1007/s10800-019-01385-0. ISSN 0021-891X.

Gussone, Joachim and Yerragudi Vijay, Chakradhar Reddy and Haubrich, Jan and Milicevic, Ksenija and Friedrich, Bernd (2018) Effect of vanadium ion valence state on the deposition behaviour in molten salt electrolysis. Journal of Applied Electrochemistry, 48 (4), pp. 427-434. Springer. doi: 10.1007/s10800-018-1165-7. ISSN 0021-891X.

Görres, Brendan (2023) Konzeptentwicklung von Prüfmöglichkeiten metallischer Materialien in kryogener Wasserstoff-Umgebung. Master's, FH Aachen. Volltext nicht frei.

Haubrich, Jan (2020) Additive Fertigung hochbeanspruchter Antriebsbauteile. Cluster NMWP.NRW. [Other] Volltext nicht online.

Haubrich, Jan and Artzt, Katia Juliane and Barriobero Vila, Pere and Gussone, Joachim and Kasperovich, Galina and Kürnsteiner, Philipp and Jägle, Eric A. and Requena, Guillermo (2018) Exploiting Metastability and Lattice Defects for Microstructural Engineering of SLM Ti-6Al-4V. Advanced additive Manufacturing Symposium AAMS18, 2018-09-03, Sheffield, GB. Volltext nicht online.

Haubrich, Jan and Gussone, Joachim and Artzt, Katia Juliane and Bauer, Peter-Philipp and Kasperovich, Galina and Löbbecke, Miriam and Requena, Guillermo and Weihs, Hendrik and Riccius, Jörg and Suslov, Dmitry and Deeken, Jan C. and Hardi, Justin (2022) Additive Manufacturing für die Luft- und Raumfahrt - Von der Probenebene zu Komponenten. LEF Seminar des Bayrischen Laserzentrums, 2022-02-15, Online. Volltext nicht online.

Haubrich, Jan and Gussone, Joachim and Barriobero-Vila, Pere and Kasperovich, Galina and Kürnsteiner, Philipp and Jägle, Eric A. and Raabe, Dierk and Schell, Norbert and Requena, Guillermo (2019) Ausnutzung von Metastabilität und Gitterdefekten bei der Mikrostrukturanpassung von SLM Ti-6Al-4V. Werkstoffwoche 2019, 2019-09-18 - 2019-09-20, Dresden. Volltext nicht frei.

Haubrich, Jan and Gussone, Joachim and Barriobero-Vila, Pere and Kürnsteiner, Philipp and Jägle, Eric A. and Raabe, Dierk and Schell, Norbert and Requena, Guillermo (2019) Exploiting Metastability and Lattice Defects for Microstructural Engineering of Selective Laser Melted Ti-6Al-4V. EUROMAT 2019, 2019-09-02 - 2019-09-06, Stockholm, Schweden. Volltext nicht online.

Haubrich, Jan and Gussone, Joachim and Garcés, Gerardo and Stark, Andreas and Hagedorn, Yves-Christian and Schell, Norbert and Requena, Guillermo (2017) Microstructure stability of gamma-TiAl produced by selective laser melting. Advanced additive Manufacturing Symposium AAMS17, 2017-09-11 - 2017-09-12, Dübendorf, Schweiz. Volltext nicht online.

Haubrich, Jan and Gussone, Joachim and Yan, Fuyao and Berglund, Ida and Stark, Andreas and Schell, Norbert and Requena, Guillermo (2022) Laser powder bed fusion of refractory complex concentrated alloys for space propulsion components. 12th EASN International Conference, 2022-10-18 - 2022-10-21, Barcelona, Spain. Volltext nicht online.

Haubrich, Jan and Kramer, Eugen (2014) Untersuchung der adhäsiven Eigenschaften der Nolax Foli-en Cox-391 und Cox-433 auf AlMg3 und X5CrNi18-10 Le-gierungen. Project Report. (Unpublished) Volltext nicht online.

Haubrich, Jan and Kramer, Eugen and Hausmann, Joachim (2014) Laser-induced chemical modification and nanostructuring of metal surfaces for optimal adhesive bonding to thermoplastic polymers: the interface between TWIP steel and PEEK. Euro Hybrid Materials and Structures 2014, 2014-04-10 - 2014-04-11, Stade.

Haubrich, Jan and Löbbecke, Miriam and Watermeyer, Philipp and Wilde, Fabian and Requena, Guillermo and da Silva, Julio Cesar (2018) Buried interfaces – A systematic study to characterize an adhesive interface at multiple scales. Applied Surface Science, 433, pp. 546-555. Elsevier. doi: 10.1016/j.apsusc.2017.10.015. ISSN 0169-4332. Volltext nicht online.

Haubrich, Jan and Schulze, Karola and Hausmann, Joachim (2014) Laser treatments of titanium surfaces In different atmospheres for Improved adhesion properties. Euro Hybrid Materials and Structures 2014, 2014-04-10 - 2014-04-11, Stade.

Hausmann, Joachim (2009) DLR-Projekt EVA, Evaluierung neuer Triebwerkssysteme. DLR-Interner Bericht. DLR-IB 334-01/09. DLR. 39 S. Volltext nicht online.

Hausmann, Joachim (2009) Technologie-Workshop Titan und Titanlegierungen. In: Eigendruck. DLR. Technologie-Workshop Titan und Titanlegierungen, 2009-06-02 - 2009-06-04, Aachen. Volltext nicht online.

Hausmann, Joachim (2010) Electrolytic Production Routes for Titanium Matrix Composites: Lessons Learned. In: CD. 2. International Round Table on Titanium Production in Molten Salts, 2010-09-20 - 2010-09-22, Trondheim, Norwegen. Volltext nicht online.

Hausmann, Joachim (2010) Technologie-Workshop: Titan und Titanlegierungen. In: Eigendruck DLR. Technologie-Workshop: Titan und Titanlegierungen, 2010-05-26 - 2010-05-28, RWTH Aachen. Volltext nicht online.

Hausmann, Joachim (2010) Elektrolytische Herstellverfahren für Titanmatrix-Verbundwerkstoffe: Ein Erfahrungsbericht. DGM Fachausschuss-Sitzung Titan, 2010-09-23, Bremen. Volltext nicht online.

Hausmann, Joachim (2010) Stärke durch Kombination - Neue Werkstoffe für eine sichere Luftfahrt. DLR Nachrichten, 127, pp. 24-27. Deutsches Zentrum für Luft- und Raumfahrt (DLR). Volltext nicht online.

Hausmann, Joachim (2010) Stand der Entwicklungen thermoplastischer Faser-Metall-Laminate. Werkstoff-Kolloquium 2010, 2010-12-07, Bonn. Volltext nicht online.

Hausmann, Joachim (2011) Metallische Verbundwerkstoffe für den Einsatz bei hohen Temperaturen. DGM. DGM-Seminar "Neue Luftfahrt-Werkstoffe", 2011-05-17 - 2011-05-18, Köln. Volltext nicht online.

Hausmann, Joachim (2011) Hybride Schichtverbunde für Leichtbauanwendungen mit hoher Schadenstoleranz. In: Seminarunterlagen. DGM. DGM-Seminar "Neue Luftfahrt-Werkstoffe", 2011-05-17 - 2011-05-18, Köln. Volltext nicht online.

Hausmann, Joachim (2011) Thermoplastische Faser-Metall-Laminate für hochbeanspruchte und schadenstolerante Leichtbauanwendungen. InnoMateria, 2011-03-15 - 2011-03-16, Köln. Volltext nicht online.

Hausmann, Joachim (2011) Hybride Werkstoffsysteme und metallische Strukturen für den Leichtbau. Jahrestagung ExzellenzNRW 2010, 2011-03-21, Düsseldorf. Volltext nicht online.

Hausmann, Joachim (2012) Down to Earth: Potentiale von Luftfahrt-Werkstoffen für die Sportgeräte-Entwicklung. 1. Materials for x-treme Sports Kongress, 2012-01-31, München. Volltext nicht online.

Hausmann, Joachim (2012) Metallische Verbundwerkstoffe für den Einsatz bei hohen Temperaturen. In: DGM-Seminar Neue Luftfahrt-Werkstoffe. DGM Frankfurt. Neue Luftfahrt-Werkstoffe, 2012-06-20 - 2012-06-21, Köln. Volltext nicht online.

Hausmann, Joachim (2012) Hybride Werkstoffe und Strukturen – Eine technische und organisatorische Herausforderung. Abschlusskolloquium DFG-Forschergruppe 524, 2012-06-28 - 2012-06-29, Kaiserslautern. Volltext nicht online.

Hausmann, Joachim (2012) DGM-Fachausschuss „Hybride Werkstoffe und Strukturen“. Klausur der Fachausschuss-Leiter, 2012-09-24, Darmstadt. Volltext nicht online.

Hausmann, Joachim (2013) Langzeitbeständige Thermoplast-Metall-Interfaces für hybride Werkstoffe und Strukturen. Hybrid-Forum auf der Hybrid-Expo, 2013-09-17 - 2013-09-19, Stuttgart. Volltext nicht online.

Hausmann, Joachim and Daoud, Atef and Heimeier, Martin and Schmitz, Dominic (2011) Gefüge und Zugfestigkeiten SiC-faserverstärkter Verbundwerkstoffe mit unterschiedlichen Multi-Metallmatrizes. In: Verbundwerkstoffe und Werkstoffverbunde, pp. 126-131. TU Chemnitz. Verbundwerkstoffe und Werkstoffverbunde, 2011-03-30 - 2011-04-01, Chemnitz. ISBN 978-3-00-033801-4. ISSN 1439-1597. Volltext nicht online.

Hausmann, Joachim and Gussone, Joachim and Friedrich, Bernd and Möller, Claudia (2009) Challenges of Electrolytic Titanium Extraction and Deposition. In: CD-ROM, p. 22. VDI Wissensforum. EUCOMAS 2009, 2009-07-01 - 2009-07-02, Augsburg. Volltext nicht online.

Hausmann, Joachim and Gussone, Joachim and Reinhard, Christina (2013) Verifikation von Werkstoffmodellen zur Eigenspannungsmodifikation bei SiC-faserverstärkten Titanlegierungen mittels Synchrotronstrahlung. In: Verbundwerkstoffe - 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, pp. 122-130. Conventus GmbH. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2013-07-03 - 2013-07-05, Karlsruhe. ISBN 978-3-00-042309-3. Volltext nicht online.

Hausmann, Joachim and Gussone, Joachim and Schurmann, Hartmut (2009) Zugeigenschaften infiltrierter Hochtemperatur-MMCs mit unterschiedlichen Faservolumengehalten. In: Verbundwerkstoffe, pp. 122-126. Wiley-VCH. 17. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2009-04-01 - 2009-04-03, Bayreuth. ISBN 978-3-527-32615-0. Volltext nicht online.

Hausmann, Joachim and Heimeier, Martin (2009) Verbundwerkstoffe mit Multi-Metallmatrix: Neue Chance für MMCs? In: Werkstoff-Kolloquium. DLR Werkstoff-Kolloquium, 2009-12-01, Köln. Volltext nicht online.

Hausmann, Joachim and Naghipour, Parya and Bartsch, Marion and Kocian, Frank (2009) Hybrid Materials and Structures for Aeronautic Applications. Window of Science, 2009-01-12, Dayton/Ohio. Volltext nicht online.

Hausmann, Joachim and Naghipour, Parya and Schulze, Karola (2013) Analytical and numerical residual stress models for fiber metal laminates – comparison and application. Procedia Materials Science, 2, pp. 68-73. Elsevier. doi: 10.1016/j.mspro.2013.02.009. ISSN 2211-8128. Volltext nicht online.

Hausmann, Joachim and Schulze, Karola (2012) Herausforderungen und Lösungsansätze bei der Entwicklung beständiger Titan-Thermoplast-Interfaces. MSE Side-Event „Multimaterialsysteme fügen – Neue Herausforderungen im Leichtbau, 2012-09-26, Darmstadt. Volltext nicht online.

Hausmann, Joachim and Naghipour, Parya and Schulze, Karola (2012) Analytical and numerical residual stress models for fiber metal laminates – comparison and application. Materials Science and Engineering (MSE 2012), 2012-09-25 - 2012-09-27, Darmstadt. Volltext nicht online.

Hausmann, Joachim and Kasperovich, Galina (2014) Aero-Thermodynamic Loads on Lightweight Advanced Structures II (ATLLAS II). Results from composite and monolithic tests for selected alloys. Finail report. Project Report. European Commission within the Seventh Framework Programme. Volltext nicht online.

Hausmann, Joachim and Kasperovich, Galina (2014) OmniTURB. Projekt 2011-2014, Abschlussbericht vom 28.02.2014. Project Report. DLR. Volltext nicht online.

Hecht, Ulrike and Vayyala, A and Barriobero Vila, Pere and Navaeilavasani, N and Gein, S and Cazic, I and Mayer, J (2022) Microstructure evolution in the hypo-eutectic alloy Al0.75CrFeNi2.1 manufactured by laser powder bed fusion and subsequent annealing. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. Elsevier. doi: 10.1016/j.msea.2022.144315. ISSN 0921-5093.

Heilmann, Stefan (2013) Ermittlung bruchmechanischer Kennwerte von hybriden Laminaten aus CF-PEEK und Titan durch Mixed-Mode-Bending-Versuche. Other, Technische Universität Dresden, Institut für Werkstoffwissenschaft. Volltext nicht online.

Heimeier, Martin (2010) Entwicklung eines Infiltrationsverfahrens für Multimetallmatrix-Faserverbundwerkstoffe. Diploma, Fachhochschule Köln. Volltext nicht online.

Heindorf, Martin (2009) Untersuchung des mechanischen Potentials und der Langzeitstabilität von hybriden Laminaten aus CF-PEEK und hochplastischen Stählen. Other, TU Bergakademie Freiberg. Volltext nicht online.

Herrmann, Peter and Doll, Georg and Kotzur, Karola (2018) Entwicklung und Untersuchung eines Fügeverfahrens für Polyetherketonketon (PEKK) Faserkunststoffverbunde (Masterarbeit). DLR-Interner Bericht. DLR-IB-BT-ST-2018-139. Master's. Universität Stuttgart. 138 S. Volltext nicht online.

Hinterlechner, Irina and Barriobero-Vila, Pere and Reitinger, Bernhard and Fromherz, Thomas and Requena, Guillermo and Burgholzer, Peter (2017) In-situ monitoring of α to β phase transformation in Ti-6Al-6V-2Sn using laser ultrasonics. Nondestructive Testing and Evaluation, pp. 1-9. Taylor & Francis. doi: 10.1080/10589759.2017.1356925. ISSN 1058-9759. Volltext nicht online.

Irfan, Muhammed and Requena, Guillermo and Haubrich, Jan (2020) Effects of Different Thermal Processing Routes and Their Parameters on The Formation of Voids in PA6 Bonded Aluminum Joints. ICCMME 2020, 2020-01-20 - 2020-01-21, London, England. Volltext nicht online.

Irfan, Muhammed and Requena, Guillermo and Haubrich, Jan (2022) The effect of weak boundary layers on adhesion properties of laser pretreated aluminum alloy EN-AW 6082 surfaces. International Journal of Adhesion and Adhesives, 119, p. 103271. Elsevier. doi: 10.1016/j.ijadhadh.2022.103271. ISSN 0143-7496. Volltext nicht frei.

Jarka, Stefan (2023) LuFo6.1 Projekt HoTStufF - Jahresbericht 2022. Project Report. DLR-IB-BT-AU-2023-165. Project thesis. 32 S.

Kabir, Rizviul and Richter, Henning (2017) Modeling of Processing-Induced Pore Morphology in an Additively-Manufactured Ti-6Al-4V Alloy. Materials, 10 (2). Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/ma10020145. ISSN 1996-1944. Volltext nicht online.

Kaldenbach, Thierry Nicolas and Heller, Matthias (2023) Mapping quantum circuits to shallow-depth measurement patterns based on graph states. Quantum algorithms for chemistry and material science simulation: bridging the gap between classical and quantum approaches, 2023-12-12 - 2023-12-14, Lausanne, Schweiz. Volltext nicht frei.

Kalina, Martha and Schöne, Vanessa and Spak, Boris and Paysan, Florian and Breitbarth, Eric and Kästner, Markus (2023) Fatigue crack growth in anisotropic aluminium sheets–phase-field modelling and experimental validation. International Journal of Fatigue, 176. Elsevier. doi: 10.1016/j.ijfatigue.2023.107874. ISSN 0142-1123.

Kasperovich, Galina (2016) Validation of FEA results by results of aero-thermal testing. Aero-Thermodynamic Loads on Lightweight Advanced Structures - ATLLAS II. D3.1.9. Final Report. Project Report. ACP0-GA-2010-263913, D3.1.9. Institute of Materials Research. 23 S.

Kasperovich, Galina and Artzt, Katia Juliane and Requena, Guillermo and Becker, Ralf and Behrendt, Thomas and Haubrich, Jan (2022) Non-destructive characterization of internal surfaces in Laser Powder Bed Fused Inconel 718 channels prior and after post-treatment. Journal of Nondestructive Testing and Ultrasonics, 03 (2022), pp. 1-5. NDT Internet Publishing. doi: 10.58286/26601. ISSN 1435-4934.

Kasperovich, Galina and Artzt, Katia Juliane and Requena, Guillermo and Becker, Ralf and Behrendt, Thomas and Haubrich, Jan (2022) Non-destructive characterization of internal surfaces in LPBF Inconel 718 channel. Journal of Nondestructive Testing (NDT). 11th Conference on Industrial Computed Tomography (iCT) 2022, 2022-02-08 - 2022-02-11, Wels, Austria. ISSN 1435-4934.

Kasperovich, Galina and Barriobero Vila, Pere and Requena, Guillermo and Haubrich, Jan (2019) SLM Fertigung von Brennkammer-Kühlungsstrukturen aus Inconel 718. Werkstoffwoche 2019, Kongress & Fachmesse Dresden, 2019-09-18 - 2019-09-20, Dresden, Germany.

Kasperovich, Galina and Becker, Ralf and Artzt, Katia Juliane and Barriobero-Vila, Pere and Requena, Guillermo and Haubrich, Jan (2021) The effect of build direction and geometric optimization in laser powder bed fusion of Inconel 718 structures with internal channels. Materials & Design, 207 (109858), pp. 1-22. Elsevier. doi: 10.1016/j.matdes.2021.109858. ISSN 0261-3069.

Kasperovich, Galina and Gherekhloo, Human and Gussone, Joachim and Hausmann, Joachim and Hagedorn, Yves-Christian (2013) Selektives Laserschmelzen von konventionellen und intermetallischen Titanlegierungen – Eigenschaften und Optimierung. Werkstoff-Kolloquium: „Leichtbauwerkstoffe für das Triebwerk von Morgen“, 2013-12-03, Köln, Germany. Volltext nicht online.

Kasperovich, Galina and Gussone, Joachim and Barriobero Vila, Pere and Kuernsteiner, Philipp and Jaegle, Eric and Raabe, Dierk and Schell, Norbert and Requena, Guillermo and Haubrich, Jan (2019) Ausnutzung von Metastabilität und Gitterdefekten bei der Mikrostrukturanpassung von SLM Ti-6Al-4V. Werkstoffwoche Kongress & Fachmesse Dresden 2019, 2019-09-18 - 2019-09-20, Dresden, Germany. Volltext nicht online.

Kasperovich, Galina and Gussone, Joachim and Haubrich, Jan and Boller, Elodie and Requena, Guillermo (2017) Microstructure and strength of Ti alloy joints brazed with Ag-28Cu. EUROMAT 2017, 2017-09-17 - 2017-09-22, Thessaloniki, Griechenland. (Unpublished)

Kasperovich, Galina and Gussone, Joachim and Requena, Guillermo and Haubrich, Jan (2023) Improved strength properties of LPBF Inconel 718 through process optimization and thermomechanical treatment. AAMS 2023 Alloys for Additive Manufacturing Symposium, 2023-09-26 - 2023-09-29, Madrid, Spanien. Volltext nicht frei.

Kasperovich, Galina and Haubrich, Jan and Gussone, Joachim and Merzouk, Tarik and Requena, Guillermo (2015) Properties of TiAl6V4 alloy parts produced by selective laser melting – parameter influence. EUROMAT-2015, European Congress and Exibition on Advanced Materials and Processes, 2015-09-20 - 2015-09-24, Warsaw, Poland.

Kasperovich, Galina and Haubrich, Jan and Gussone, Joachim and Requena, Guillermo (2016) Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting. Materials and Design (105), pp. 160-170. Elsevier. doi: 10.1016/j.matdes.2016.05.070. ISSN 0264-1275.

Kasperovich, Galina and Hausmann, Joachim (2014) FEA of TMC ATLLAS generic leading edge model wing. Aero-Thermodynamic Loads on Lightweight Advanced Structures II - ATLLAS II, D3.1.4, Final Report, pp. 1-52, 24.10.2014. Project Report. European Commission within the Seventh Framework Programme. Volltext nicht online.

Kasperovich, Galina and Hausmann, Joachim (2014) Effect of thermomechanical treatments on the properties of TiAl6V4 fabricated by selective laser melting. Fraunhofer Direct Digital Manufacturing Conference - DDMC 2014, 2014-03-12 - 2014-03-13, Berlin, Germany.

Kasperovich, Galina and Hausmann, Joachim (2015) Improvement of fatigue resistance and ductility of selective laser molten TiAl6V4. Journal of Materials Processing Technology (220), pp. 202-214. Elsevier. doi: 10.1016/j.jmatprotec.2015.01.025. ISSN 0924-0136. Volltext nicht online.

Kasperovich, Galina and Hausmann, Joachim and Ratke, Lorenz (2013) Selektives Laserschmelzen (SLM) - Ultrarasche Erstarrung. Praktische Probleme und Notwendigkeit von originellen numerischen Lösungen. Workshop „Numerische Simulation von SLM“ 2013, 2013-10-18, Köln, Germany. Volltext nicht online.

Kasperovich, Galina and Schöffler, Robin and Lakemann, Moritz and Petersen, Anna and Haubrich, Jan (2023) Shape modification of cooling channels obtained by LPBF printing with non-destructive optimization methods. 17th European Congress and Exhibition on Advanced Materials and Processes - FEMS EUROMAT 2023, 2023-09-03 - 2023-09-07, Frankfurt am Main, Germany. Volltext nicht frei.

Kezer, Hüseyin (2018) Untersuchung des Anbindungs- und Alterungsverhaltens von adhäsiv gefügten Verbindungen: Einfluss der Laservorbehandlung mit einem Top-Hat-Laserprofil. Master's. Volltext nicht online.

Klamann, Lisa Marie (2023) Materialuntersuchungen einer für LPBF optimierten Al-Fe-Zr Legierung im Hinblick auf die Etablierung von Prozessparametern für spezifische Anwendungsfälle. Master's, Hochschule Bonn-Rhein-Sieg (HBRS). Volltext nicht online.

Klamann, Lisa Marie and Bauer, Peter-Philipp and Wielenberg, Christoph and Bugelnig, Katrin and Requena, Guillermo and Haubrich, Jan (2023) Relationship between Process Parameters and Material Properties of an Aluminium Alloy Customized for Additive Manufacturing. Alloys for Additive Manufacturing, 2023-09-27 - 2023-09-29, Madrid, Spain. Volltext nicht online.

Klein, Thomas and Arnoldt, Aurel and Gomes, Manuel and Barriobero Vila, Pere (2023) Microstructure and Mechanical Properties of an Advanced Ag-Microalloyed Aluminum Crossover Alloy Tailored for Wire-Arc Directed Energy Deposition. JOM: Journal of the Minerals, Metals and Materials Society, 75 (10), pp. 4128-4137. Springer. doi: 10.1007/s11837-023-05838-y. ISSN 1047-4838.

Knieps, M and Messé, O and Barriobero Vila, P. and Hecht, U. (2022) Advanced characterization of two novel Fe-rich high entropy alloys developed for laser powder bed fusion in the Al-Co-Cr-Fe-Ni-Zr system. Materialia, 26. Elsevier. doi: 10.1016/j.mtla.2022.101615. ISSN 2589-1529.

Knoblauch, Nicole (2010) Untersuchung des mechanischen Potentials von hybriden Laminaten aus CF-PEEK und Titan. Bachelor's, Hochschule Bonn-Rhein-Sieg. Volltext nicht online.

Kocian, Frank (2010) Alternative interdisziplinäre Auslegung und Gestaltung eines militärischen Triebwerksverdichters. In: Tagungsband der Fachtagung des Rüstungsbereiches. Fachtagung des Rüstungsbereiches „Neue Technologien im militärischen Luftfahrtbereich“ , 2010-06-08 - 2010-06-10, Berlin, Deutschland. Volltext nicht online.

Kocian, Frank and Hausmann, Joachim (2009) TMC- Faserverstärktes Titan. In: LTH-FL Luftfahrttechnisches Handbuch LTH-FL (FL 41 200-01). Volltext nicht online.

Kocian, Frank and Hausmann, Joachim and Nicke, Eberhard (2010) Development of an alternative rotor concept for aero engine compressors. EUCOMAS 2010, 2010-06-07 - 2010-06-08, Berlin, Deutschland. Volltext nicht online.

Kocian, Frank and Hausmann, Joachim and Siller, Ulrich and Belz, Joachim and Bunde, Manfred (2010) Verwendungsnachweis der BWB Mittel im Projekt AeroLight. DLR-Interner Bericht. DLR-IB 435-2010/43. 28 S. (Unpublished) Volltext nicht online.

Kocian, Frank and Ebel, Paul-Benjamin and Drees, Björn and Schulze, Karola and Hausmann, Joachim and Voggenreiter, Heinz (2014) Hybrid structures in aero engines. In: CEAS Aeronautical Journal Springer. doi: 10.1007/s13272-014-0141-0. ISSN 1869-5582. Volltext nicht online.

Kotzur, Karola and Chadwick, Ashley and Löbbecke, Miriam (2022) Moderation of thermoplastic composite crystallinity and mechanical properties through in-situ manufacturing and post-manufacturing tempering: Part 2 – Morphological characterisation. Composites Part A Applied Science and Manufacturing, 163, e107225. Elsevier. doi: 10.1016/j.compositesa.2022.107225. ISSN 1359-835X. Volltext nicht online.

Kotzur, Karola and Doll, Georg and Herrmann, Peter (2019) Analysis and development of a brazing method to weld carbon fiber reinforced poly ether ketone ketone (CF/PEKK) with amorphous PEKK. SAMPE 2019, 2019-09-18 - 2019-09-20, Nantes, Frankreich. Volltext nicht online.

Kotzur, Karola and Doll, Georg and Herrmann, Peter (2022) Analysis and development of a brazing method to weld carbon fiber-reinforced poly ether ketone ketone with amorphous PEKK. Advanced Manufacturing: Polymer and Composites Science, 8 (3). Taylor & Francis. doi: 10.1080/20550340.2022.2122119. ISSN 2055-0340.

Kotzur, Karola and Doll, Georg and Herrmann, Peter and Nowotny, Sebastian (2019) Forschung und Entwicklung im DLR - Stoffschlüssige Verbindungen mit Polymeren: Strukturelles Kleben und thermoplastische Fügetechnologien für den Leichtbau. Fachvortrag 2: Fügen von thermoplastischem CFK. 3M Aerospace Branchenforum, 2019-09-25 - 2019-09-26, Neuss, Deutschland. Volltext nicht online.

Kramer, Eugen (2014) Oberflächenvorbehandlung von „High Strength and Ductility“ Stahl mit einem gepulsten Laser für die Optimierung der adhäsiven Eigenschaften. Master's, Universität Duisburg-Essen. Volltext nicht online.

Kürnsteiner, Philipp and Barriobero-Vila, Pere and Bajaj, Priyanshu and De Geuser, Frederic and Wilms, Markus B. and Jägle, Eric A. and Raabe, Dierk (2023) Designing an Fe-Ni-Ti maraging steel tailormade for laser additive manufacturing. Additive Manufacturing, 73. Elsevier. doi: 10.1016/j.addma.2023.103647. ISSN 2214-8604.

Kürnsteiner, Philipp and Wilms, Markus B. and Weisheit, Andreas and Barriobero-Vila, Pere and Jägle, Eric A. and Raabe, Dierk (2017) Massive nanoprecipitation in an Fe-19Ni- x Al maraging steel triggered by the intrinsic heat treatment during laser metal deposition. Acta Materialia, 129, pp. 52-60. Elsevier. doi: 10.1016/j.actamat.2017.02.069. ISSN 1359-6454. Volltext nicht online.

Kürnsteiner, Philipp and Wilms, Markus Benjamin and Weisheit, Andreas and Barriobero-Vila, Pere and Gault, Baptiste and Jägle, Eric Aimé and Raabe, Dierk (2017) In-process Precipitation During Laser Additive Manufacturing Investigated by Atom Probe Tomography. Microscopy and Microanalysis, 23 (S1), pp. 694-695. Cambridge University Press. doi: 10.1017/S1431927617004135. ISSN 1431-9276. Volltext nicht online.

Laag, Yassine (2018) Machbarkeitsstudie zur Laseroberflächenvorbehandlung für Aluminium/Epoxid-Klebeverbunde. Master's, Hochschule Koblenz. Volltext nicht online.

Laquai, R. and Müller, B.R. and Kasperovich, G. and Haubrich, Jan and Requena, Guillermo and Bruno, G. (2017) X-ray refraction distinguishes unprocessed powder from empty pores in selective laser melting Ti-6Al-4V. Materials Research Letters, 6 (2), pp. 130-135. Taylor & Francis. doi: 10.1080/21663831.2017.1409288. ISSN 2166-3831.

Laquai, René and Müller, Bernd R. and Kasperovich, Galina and Requena, Guillermo and Bruno, Giovanni (2018) Unterscheidung verschiedener charakteristischer Defekte in mittels selektivem Laserschmelzen hergestelltem Ti-6Al-4V durch Röntgen-Refraktionsradiographie. Bundesanstalt für Materialforschung und -prüfung (BAM). DGZfP-Jahrestagung 2018, 2018-05-07 - 2018-05-09, Leipzig, Germany. ISBN 978-3-940283-92-4.

Laquai, René and Müller, Bernd Randolf and Kasperovich, Galina and Requena, Guillermo and Haubrich, Jan and Bruno, Giovanni (2020) Classification of Defect Types in SLM Ti-6Al-V4 by X-ray Refraction Topography. Materials Performance and Characterization (MPC), 9 (1), pp. 82-93. ASTM international. doi: 10.1520/MPC20190080. ISSN 2165-3992.

Löbbecke, Miriam (2019) Einflussfaktoren und deren Auswirkung auf das Adhäsions- und Alterungsverhalten von Titan-Polymer-Klebungen. Dissertation, Ruhr-Universität Bochum. Volltext nicht online.

Löbbecke, Miriam and Bayerbasi, Tolga Johannes and Bartsch, Marion and Haubrich, Jan (2023) Role of surface structures on long term stability of adhesive joints between Ti-15V-3Cr-3Sn-3Al and polyether-ether-ketone. International Journal of Adhesion and Adhesives. Elsevier. doi: 10.1016/j.ijadhadh.2022.103282. ISSN 0143-7496.

Löbbecke, Miriam and Gussone, Joachim and Haubrich, Jan (2023) Titanium powder reuse strategies in Laser Powder Bed Fusion. FEMS EUROMAT 2023, 2023-09-03 - 2023-09-07, Frankfurt am Main, Deutschland. Volltext nicht online.

Löbbecke, Miriam and Gussone, Joachim and Kasperovich, Galina and Requena, Guillermo and Haubrich, Jan (2022) SUSTAINair AM activities @ DLR: Sustainability by enhancing titanium powder life cycles. MULTI-FUN Speed Tech Forum, 2022-10-05, Salzburg, Österreich. Volltext nicht online.

Löbbecke, Miriam and Gussone, Joachim and Kasperovich, Galina and Requena, Guillermo and Haubrich, Jan (2022) The influence of processing conditions in Laser Powder Bed Fusion and powder recycling strategies for an extended titanium powder life-cycle. 12th EASN International Conference on Innovation in Aviation and Space for opening New Horizons, 2022-10-18 - 2022-10-21, Barcelona, Spanien. Volltext nicht online.

Löbbecke, Miriam and Haubrich, Jan (2019) Bonding and aging mechanisms of polymers on titanium alloys. EUROMAT 2019, 2019-09-01 - 2019-09-05, Stockholm, Schweden.

Löbbecke, Miriam and Haubrich, Jan (2021) Laser surface pretreatment for structural bonding and coating. EUROMAT 2021, 2021-09-13 - 2021-09-17, virtuell. Volltext nicht online.

Löbbecke, Miriam and Haubrich, Jan (2021) Laseroberflächenvorbehandlung für langzeitstabile Metallklebungen. LEF-Seminar Brick 1:Oberflächenmodifikation metallischer Werkstoffe, 2021-06-14, virtuell. Volltext nicht online.

Löbbecke, Miriam and Kotzur, Karola and Haubrich, Jan (2019) Forschung und Entwicklung im DLR - Stoffschlüssige Verbindungen mit Polymeren: Strukturelles Kleben und thermoplastische Fügetechnologien für den Leichtbau. Fachvortrag 1: Fügen von Metall und Polymer. 3M Aerospace Branchenforum, 2019-09-25 - 2019-09-26, Neuss, Deutschland. Volltext nicht online.

Lützenkirchen, Isabel (2023) Einfluss von Grenzflächenmodifikationen auf die Festigkeit und Alterungsbeständigkeit von Aluminium- und Hybridklebungen. Master's, Hochschule Bonn-Rhein-Sieg. Volltext nicht frei.

Ma, Yan and Souza Filho, Isnaldi and Zhang, Xue and Nandy, Supriya and Barriobero Vila, Pere and Requena, Guillermo and Vogel, Dirk and Rohwerder, Michael and Ponge, Dirk and Springer, Hauke and Raabe, Dierk (2022) Hydrogen-based direct reduction of iron oxide at 700°C: heterogeneity at pellet-and microstructure-scales. International Journal of Minerals, Metallurgy and Materials, 29, pp. 1901-1907. University of Science and Technology Beijing. doi: 10.1007/s12613-022-2440-5. ISSN 1674-4799.

Melching, David and Breitbarth, Eric (2023) Advanced crack tip field characterization using conjugate work integrals. International Journal of Fatigue. Elsevier. doi: 10.1016/j.ijfatigue.2023.107501. ISSN 0142-1123.

Melching, David and Breitbarth, Eric (2023) Discovering physical formulas with deep symbolic regression - a universal crack tip correction algorithm. AIMSE 2023, 2023-11-22 - 2023-11-23, Saarbrücken, Deutschland. Volltext nicht frei.

Melching, David and Schultheis, Erik and Breitbarth, Eric (2024) Generating artificial displacement data of cracked specimen using physics-guided adversarial networks. Machine Learning: Science and Technology. Institute of Physics Publishing. doi: 10.1088/2632-2153/ad15b2. ISSN 2632-2153.

Melching, David and Strohmann, Tobias and Paysan, Florian and Requena, Guillermo and Breitbarth, Eric (2023) Advanced crack tip field characterization using digital image correlation, machine learning, and integral evaluation. International Conference on Fracture (ICF15), 2023-06-11 - 2023-06-16, Atlanta, GA, USA. Volltext nicht frei.

Melching, David and Strohmann, Tobias and Requena, Guillermo and Breitbarth, Eric (2021) Explainable AI for precise fatigue crack detection. Materials Week 2021, 2021-09-07 - 2021-09-09, virtuell.

Melching, David and Strohmann, Tobias and Requena, Guillermo and Breitbarth, Eric (2022) Explainable machine learning for precise fatigue crack tip detection. Scientific Reports, 12 (9513). Nature Publishing Group. doi: 10.1038/s41598-022-13275-1. ISSN 2045-2322.

Melching, David and Strohmann, Tobias and Requena, Guillermo and Breitbarth, Eric (2022) Explainable machine learning for precise fatigue crack detection. MSE 2022, 2022-09-27 - 2022-09-29, Darmstadt, Deutschland.

Merzouk, Tarik (2009) Verfahrensuntersuchung und -entwicklung für hartgelötete Titanverbindungen. Bachelor's, FH Bonn-Rhein-Sieg. Volltext nicht online.

Milicevic, Ksenija and Friedrich, Bernd and Gussone, Joachim and Haubrich, Jan (2017) Anodic dissolution of vanadium in molten LiCl–KCl–TiCl2. Journal of Applied Electrochemistry, 47 (5), pp. 573-581. Springer. doi: 10.1007/s10800-017-1061-6. ISSN 0021-891X. Volltext nicht online.

Mishurova, Tatiana and Artzt, Katia Juliane and Cabeza, Sandra and Haubrich, Jan and Requena, Guillermo and Bruno, Giovanni (2018) Subsurface Residual Stress Analysis in Ti-6Al-4V Additive Manufactured Parts by Synchrotron X-ray Diffraction. European conference on non-destructive testing (ECNDT) 2018, 2018-06-11, Göteburg, Schweden. Volltext nicht online.

Mishurova, Tatiana and Artzt, Katia Juliane and Haubrich, Jan and Evsevleev, Sergei and Evans, Alexander and Meixner, Matthias and Munoz, Itziar Serrano and Sevostianov, Igor and Requena, Guillermo and Bruno, Giovanni (2020) Connecting Diffraction-Based Strain with Macroscopic Stresses in Laser Powder Bed Fused Ti-6Al-4V. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 51 (6), pp. 3194-3204. Springer. doi: 10.1007/s11661-020-05711-6. ISSN 1073-5623.

Mishurova, Tatiana and Artzt, Katia Juliane and Haubrich, Jan and Requena, Guillermo and Bruno, Giovanni (2018) Influence of manufacturing parameters on microstructure and subsurface residual stress in SLM Ti-6Al-4V. Advanced additive Manufacturing Symposium AAMS18, 2018-09-03, Sheffield, GB. Volltext nicht online.

Mishurova, Tatiana and Artzt, Katia Juliane and Haubrich, Jan and Requena, Guillermo and Bruno, Giovanni (2019) New aspects about the search for the most relevant parameters optimizing SLM materials. Additive Manufacturing (25), pp. 325-334. Elsevier. doi: 10.1016/j.addma.2018.11.023. ISSN 2214-8604.

Mishurova, Tatiana and Artzt, Katia Juliane and Haubrich, Jan and Requena, Guillermo and Bruno, Giovanni (2019) Exploring the Correlation between Subsurface Residual Stresses and Manufacturing Parameters in Laser Powder Bed Fused Ti-6Al-4V. Metals, 9 (2), p. 261. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/met9020261. ISSN 2075-4701.

Mishurova, Tatiana and Artzt, Katia Juliane and Rehmer, Birgit and Bruno, Giovanni and Haubrich, Jan and Serrano-Munoz, Itziar and Requena, Guillermo (2021) Separation of the impact of residual stress and microstructure on the fatigue performance of LPBF Ti-6Al-4V at elevated temperature (Keynote). Euromat 2021, 2021-09-13 - 2021-09-17, online. Volltext nicht online.

Mishurova, Tatiana and Artzt, Katia Juliane and Rehmer, Birgit and Haubrich, Jan and Ávila, Luis and Schoenstein, Frédéric and Serrano-Munoz, Itziar and Requena, Guillermo and Bruno, Giovanni (2021) Separation of the impact of residual stress and microstructure on the fatigue performance of LPBF Ti-6Al-4V at elevated temperature. International Journal of Fatigue, 148, p. 106239. Elsevier. doi: 10.1016/j.ijfatigue.2021.106239. ISSN 0142-1123. Volltext nicht online.

Mishurova, Tatiana and Cabeza, Sandra and Artzt, Katia and Haubrich, Jan and Klaus, Manuela and Genzel, Christoph and Requena, Guillermo and Bruno, Giovanni (2017) An Assessment of Subsurface Residual Stress Analysis in SLM Ti-6Al-4V. Materials, 10 (4), p. 348. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/ma10040348. ISSN 1996-1944.

Mishurova, Tatiana and Cabeza, Sandra and Artzt, Katia Juliane and Haubrich, Jan and Requena, Guillermo and Bruno, Giovanni (2018) Analyse von oberflächennahen Eigenspannungen in SLM Ti-6Al-4V-Komponenten. Conference Additiv gefertigte Bauteile und Strukturen, 2018-11-07, Berlin. Volltext nicht online.

Mishurova, Tatiana and Evsevleev, Sergei and Artzt, Katia Juliane and Haubrich, Jan and Sevostianov, Igor and Requena, Guillermo and Bruno, Giovanni (2022) Micromechanical behavior of annealed Ti-6Al-4V produced by Laser Powder Bed Fusion. Materials & Design, 2 (1), pp. 186-200. Elsevier. doi: 10.1080/26889277.2022.2063763. ISSN 0264-1275.

Mishurova, Tatiana and Rehmer, Birgit and Artzt, Katia Juliane and Barriobero Vila, Pere and Serrano-Munoz, Itzar and Haubrich, Jan and Requena, Guillermo and Bruno, Giovanni (2020) Influence of Residual Stress and Microstructure on Mechanical Performance of LPBF Ti-6Al-4V. ASTM International Conference on Additive Manufacturing (ASTM ICAM 2020), 2020-11-16 - 2020-11-20, Virtuell. Volltext nicht online.

Mockenhaupt, Florian (2021) 3D-Segmentierung von Synchrotron-Tomographien einer Al-Si-Legierung mittels künstlicher neuronaler Netze. Master's, Technische Hochschule Köln. Volltext nicht online.

Munk, Juri and Breitbarth, Eric and Pirch, Norbert and Siemer, Tobias and Häfner, Constantin (2022) Geometry Effect on Microstructure and Mechanical Properties in Laser Powder Bed Fusion of Ti-6Al-4V. Metals. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/met12030482. ISSN 2075-4701.

Munk, Juri and Haubrich, Jan and Artzt, Katia Juliane and Gussone, Joachim and Barriobero Vila, Pere and Kasperovich, Galina and Löbbecke, Miriam and Requena, Guillermo and Riccius, Jörg and Suslov, Dmitry and Hümbert, Simon and Deeken, Jan C. and Hardi, Justin and Lauck, Felix and Werling, Lukas and Braune, Luca (2023) Additive Manufacturing for Space Applications. Selected Topics of Space Propulsion - TU Darmstadt, 2023-12-15, Darmstadt, Deutschland. Volltext nicht frei.

Munk, Juri and Hümbert, Simon and Haubrich, Jan and Meth, Jonas and Stäbler, Tina and Werling, Lukas and Lauck, Felix and Braune, Luca (2023) 3D Printing of Satellite Components - Challenges and Opportunities. Workshop on Innovative Approaches to Spacecraft Manufacturing, 2023-11-16, Bremen, Deutschland. Volltext nicht frei.

Munk, Juri and Kasperovich, Galina and Gussone, Joachim and Haubrich, Jan and Bütow, Calvin and Requena, Guillermo (2023) Entwicklung 3D-Druck Materialien. HGF Workshop 3D-Druck, Arbeitskreis wissenschaftlicher Gerätebau, 2023-11-09, Köln, Deutschland. Volltext nicht frei.

Müller, Bernd R. and Kupsch, Andreas and Laquai, René and Nellesen, Jens and Tillmann, Wolfgang and Kasperovich, Galina and Bruno, Giovanni (2018) Microstructure characterisation of advanced materials via 2D and 3D X-ray refraction techniques. In: Materials Science Forum, 941, pp. 2401-2406. THERMEC 2018. Zürich: Trans Tech Publications. THERMEC 2018, 2018-07-09 - 2018-07-13, Paris, France. doi: 10.4028/www.scientific.net/MSF.941.2401. ISBN 978-303571208-7. ISSN 0255-5476. Volltext nicht online.

Nitzsche, Lukas (2021) Einsatz einer neu entwickelten Hochtemperatur-Bauraumheizung für die additive Fertigung von Titanaluminiden. Bachelor's, Rheinische Fachhochschule Köln. Volltext nicht online.

Nitzsche, Lukas (2023) Additive Fertigung komplexer refraktärmetallischer Legierungen für Raumfahrtanwendungen. Master's, RHEINISCHE FACHHOCHSCHULE KÖLN. Volltext nicht online.

Paysan, Florian and Breitbarth, Eric (2022) Towards three dimensional aspects of plasticity-induced crack closure: A finite element simulation. International Journal of Fatigue, 163 (107092). Elsevier. doi: 10.1016/j.ijfatigue.2022.107092. ISSN 0142-1123.

Paysan, Florian and Breitbarth, Eric and Melching, David and Strohmann, Tobias (2022) Integration von Robotik, intelligenter Algorithmen und Digitaler Bildkorrelation zur Erforschung komplexer lokalisierter Effekte bei Rissfortschrittsversuchen. Tagungsband Arbeitskreis Bruchmechanik und Bauteilsicherheit, 54. doi: 10.48447/Br-2022-017. Volltext nicht frei.

Paysan, Florian and Dietrich, Eric and Breitbarth, Eric (2023) A Robot-Assisted Microscopy System for Digital Image Correlation in Fatigue Crack Growth Testing. Experimental Mechanics. Springer. doi: 10.1007/s11340-023-00964-9. ISSN 0014-4851.

Paysan, Florian and Dömling, Ferdinand and Schöne, Vanessa and Breitbarth, Eric (2022) Numerical and experimental investigation of crack closure due to plasticity-induced residual stresses. 9th Colloquium of the German Association of Computational Mechanics, 2022-09-21 - 2022-09-23, Essen. Volltext nicht frei.

Paysan, Florian and Dömling, Ferdinand and Vanessa, Schöne and Breitbarth, Eric (2023) Identifikation von Plastizitäts-induziertem Rissschließen mittels hochauflösender Digitaler Bildkorrelation. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 2023-02-13, Darmstadt. doi: 10.48447/Br-2023-BB. Volltext nicht frei.

Paysan, Florian and Görres, Brendan and Gussone, Joachim and Bauer, Peter-Philipp and Breitbarth, Eric and Requena, Guillermo (2023) Teststrategien zur Charakterisierung von Metallen in H2 Umgebung. Deutscher Luft- und Raumfahrtkongress 2023, 2023-09-19 - 2023-09-21, Stuttgart. Volltext nicht frei.

Paysan, Florian and Quadfasel, Angela and Witulski, Thomas and Breitbarth, Eric (2023) Einfluss der Mikrostruktur von AA7010-T7452 auf die Pfadstabilität von Ermüdungsrissen. Arbeitskreissitzung Mixed Mode, 2023-06-07, Kassel. Volltext nicht frei.

Paysan, Florian and Strohmann, Tobias and Melching, David and Breitbarth, Eric and Requena, Guillermo (2022) A robot supported mechanical test stand for multiscale digital image correlation and large data acquisition. International Conference on Advanced Manufacturing, 2022-03-07 - 2022-03-10, online. Volltext nicht frei.

Paysan, Florian and Strohmann, Tobias and Melching, David and Schöne, Vanessa and Breitbarth, Eric (2022) Uncovering the mechanisms of fatigue crack growth of AA2024-T3 by time-resolved local digital image correlation. Materials Science and Engineering MSE2022, 2022-09-27 - 2022-09-29, Darmstadt. Volltext nicht frei.

Pereira, G and Da Silva, E and Requena, Guillermo and Avila, J and Tarpani, J (2021) Microstructural, mechanical, and fracture characterization of metal matrix composite manufactured by accumulative roll bonding. Journal of Materials Engineering and Performance. Springer. doi: 10.1007/s11665-021-05619-1. ISSN 1059-9495.

Petersen, Anna and Ebel, Paul-Benjamin and Ebach-Stahl, Andrea and Kasperovich, Galina and Kind, Nora (2023) DLR-Project 3DCeraTurb: New materials and manufacturing technologies for the turbine. Deutscher Luft- und Raumfahrtkongress (DLRK) 2023, 2023-09-19 - 2023-09-21, Stuttgart.

Poliserpi, Mariana and Barriobero Vila, Pere and Requena, Guillermo and Noel Gercia, Laura and Tolley, Alfredo and Poletti, Cecilia and Vojtek, Tomáš and Weiser, Adam and Schell, Norbert and Stark, Andreas and Boeri, Roberto and Sommadossi, Silvana (2021) TEM and Synchrotron X-ray Study of the Evolution of Phases Formed During Bonding of IN718/Al/IN718 Couples by TLPB. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. Springer. doi: 10.1007/s11661-021-06159-y. ISSN 1073-5623. Volltext nicht frei.

Reh, Stefan (2010) Vorlesung WS09/10: Stochastische Auslegung von Turbinentriebwerksbauteilen. [Other] (Unpublished) Volltext nicht online.

Reh, Stefan (2010) Vorlesung SS2010: Stochastische Auslegung von Turbinentriebwerksbauteilen. [Other] Volltext nicht online.

Reh, Stefan and Besel, Michael (2010) Defektmodellierung und Robust Design. In: keine Veröffentlichung. Cluster-Forum Simulation in der Werkstofftechnik - Werkstoffe-Prozess-Defekte, 2010-10-14, Nürnberg, Deutschland. (Unpublished) Volltext nicht frei.

Reh, Stefan and Voggenreiter, Heinz (2009) Metallische Werkstoffe im Flugzeugbau – der Silberstreifen am Horizont. Konstruktion. Springer. ISSN 0720-5953.

Reh, Stefan and Alfaro Mercado, Ulises and Besel, Michael and Dresbach, Christian and Dreßler, Ulrike and van Enkhuizen, Marinus Johannus and Landgraf, Florian (2014) Herstellungs-optimierte Struktur-Montage (HERMO) - Schlussbericht. DLR-Interner Bericht, Project Report. DLR-IB 334-01/14. 82 S.

Reh, Stefan and Besel, Michael and Alfaro Mercado, Ulises and Landgraf, Florian and Dreßler, Ulrike (2013) Herstellungs-optimierter metallischer Rumpf (HERMET) - Schlussbericht. Project Report. DLR-IB 334-03/13. 97 S.

Reinhard, Christina and Gussone, Joachim and Kasperovich, Galina and Merzouk, Tarik and Gherekhloo, Human and Hausmann, Joachim (2013) The Origin of Crack Initiation and Internal Stresses in SiC Fibre reinforced Multi Metal Matrix Composites investigated by Synchrotron Radiation. In: Verbundwerkstoffe - 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, pp. 140-148. Conventus GmbH. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2013-07-03 - 2013-07-05, Karlsruhe. ISBN 978-3-00-042309-3. Volltext nicht online.

Requena, Guillermo and Barriobero Vila, Pere and Gussone, Joachim and Haubrich, Jan and Kasperovich, Galina and Bauer, P. and Artzt, Katia Juliane and Sandlöbes, Stefanie and Da Silva, Julio and Cloetens, Peter (2017) Using metastability to engineer the microstructure of Ti-6V-4Al produced by selective laser melting. Euromat 2017, 2017, Griechenland. Volltext nicht frei.

Requena, Guillermo and Bugelnig, Katrin and Sket, Federico and Milenkovic, Sridjan and Rödler, Georg and Weisheit, Andreas and Gussone, Joachim and Haubrich, Jan and Barriobero Vila, Pere and Pusztai, Tamas and Granasy, L. and Theofilatos, Angelos and da silva, J. and Hecht, Ulrike (2020) Ultrafine Fe-Fe2Ti eutectics by directed energy deposition: Insights into microstructure formation based on experimental techniques and phase field modelling. Additive Manufacturing. Elsevier. doi: 10.1016/j.addma.2020.101133. ISSN 2214-8604. Volltext nicht frei.

Richarz, Alina-Marie (2023) Untersuchung von Lösbarkeitsansätzen für Klebeverbindungen in Metallklebungen. Bachelor's, Hochschule Bonn-Rhein-Sieg. Volltext nicht online.

Roveda, Ilaria and Serrano-Munoz, Itzar and Haubrich, Jan and Requena, Guillermo and Madia, Mauro (2023) Prediction of the fatigue limit of additively manufactured metallic materials. ASTM-ICAM 2023, 2023-10-30 - 2023-11-03, Washington DC, USA. Volltext nicht online.

Roveda, Ilaria and Serrano-Munoz, Itziar and Haubrich, Jan and Requena, Guillermo and Madia, Mauro (2023) Influence of post-process heat treatments on the fatigue crack propagation behaviour of a PBF-LB/M AlSi10Mg alloy. International Journal of Fatigue, 175, p. 107808. Elsevier. doi: 10.1016/j.ijfatigue.2023.107808. ISSN 0142-1123.

Roveda, Ilaria and Serrano-Munoz, Itziar and Mishurova, Tatiana and Madia, Mauro and Pirling, Thilo and Evans, Alexander and Klaus, Manuela and Haubrich, Jan and Requena, Guillermo and Bruno, Giovanni (2022) Influence of a 265 °C heat treatment on the residual stress state of a PBF-LB/M AlSi10Mg alloy. Journal of Materials Science, 57 (48), pp. 22082-22098. Springer. doi: 10.1007/s10853-022-07997-w. ISSN 0022-2461.

Salein, Judith (2010) POTENTIALANALYSE VON HYBRIDEN STAHL-CMC-LAMINATEN. Diploma, Fachhochschule Köln. Volltext nicht online.

Salice, Melissa (2023) Auswirkung der Wiederverwendung von Ti-6Al-4V-Pulver auf Pulvereigenschaften und Bauteilqualität bei der additiven Fertigung. Bachelor's, Hochschule Bonn-Rhein-Sieg. Volltext nicht online.

Scheibert, Paul and Raßoff, Alexander and Kalina, Karl A. and Gussone, Joachim and Bugelnig, Katrin and Diehl, Martin and Kästner, Markus (2023) Two-stage 2D-to-3D reconstruction of realistic microstructures: Implementation and numerical validation by effective properties. Computer Methods in Applied Mechanics and Engineering, 412 (116098). Elsevier. doi: 10.1016/j.cma.2023.116098. ISSN 0045-7825.

Schmitz, Dominic (2011) Ermüdungserscheinungen an Multimetallmatrix-Faserverbundwerkstoffen. Bachelor's, FH Köln. Volltext nicht online.

Schultheis, Erik (2022) Generating Displacement Data with Physics-Guided Adversarial Networks and Physics-Informed Neural Networks. Master's, Technische Universität Darmstadt. Volltext nicht frei.

Schultheis, Erik (2023) Quantum computing as a transformative tool in materials science and engineering. DLR materials colloqium 2023, 2023-12-05, Köln, Deutschland. Volltext nicht frei.

Schultheis, Erik (2023) Quantum computing-aided defect studies. Quantum algorithms for chemistry and material science simulation: bridging the gap between classical and quantum approaches, 2023-12-12 - 2023-12-14, Lausanne, Schweiz. Volltext nicht frei.

Schultheis, Erik and Melching, David and Breitbarth, Eric (2022) Generating Synthetic Digital Image Correlation Data using Physics-Guided Adversarial Networks. MSE 2022, 2022-09-27 - 2022-09-29, Darmstadt, Deutschland. Volltext nicht frei.

Schultheis, Erik and Melching, David and Breitbarth, Eric (2023) Crack tip detection without manual labelling using cycle-consistent adversarial network. AIMSE 2023, 2023-11-22 - 2023-11-23, Saarbrücken, Deutschland. Volltext nicht frei.

Schulze, Karola (2010) Fatigue and tensile properties of hybrid Ti/CFRP laminates. Junior Euromat 2010, 2010-07-26 - 2010-07-29, Lausanne, Schweiz. Volltext nicht online.

Schulze, Karola (2010) Einfluss von Oberflächenlaserbehandlung auf den Feuchtigkeitseinfluss von Titan-Polyetheretherketon Verbunden. DLR-Interner Bericht. DLR-IB 334 10/10 . 37 S. Volltext nicht online.

Schulze, Karola (2013) Feuchtigkeitsresistenz verschiedener Titan-PEEK Grenzflächen. Materials Day, 2013-05-16, Osnabrück, Deutschland. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim (2010) Einfluss von Wärmebehandlungen auf die Eigenschaften von Titan-CFK-Laminaten. Werkstoff-Kolloquium 2010, 2010-12-07, Bonn, Deutschland. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim (2012) Feuchtigkeitsresistenz verschiedener Titan-PEEK Interfaces. Fachausschusssitzung Hybride Werkstoffe und Strukturen, 2012-09-12, Köln, Deutschland. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Bartsch, Marion and Naghipour, Parya (2011) Hochfeste und hochsteife hybride Schichtverbunde für großseriennahe Anwendungen im Leichtbau. Kongressmesse InnoMateria 2011, 2011-03-15 - 2011-03-16, Köln, Deutschland. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Heilmann, Stefan and Wielage, Bernhard (2013) Adhesion and Degradation of well-designed Titanium-PEEK Interfaces within Titanium-CF/PEEK Laminates. 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02, Montreal, Kanada. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Heilmann, Stefan and Wielage, Bernhard (2013) Bruchmechanische Untersuchung der Titan-PEEK-Grenzfläche in thermoplastischen Titan-CF/PEEK-Laminaten durch Mixed-Mode-Bending-Versuche. In: Tagungsband zum 16. Werkstofftechnischen Kolloquium und zur 10. Industriefachtagung "Oberflächen- und Wärmebehandlungstechnik", 50, pp. 350-359. Eigenverlag Chemnitz. 16. Werkstofftechnische Kolloquium, 2013-09-05 - 2013-09-06, Chemnitz, Deutschland. ISBN 978-3-00-043129-6. ISSN 1439-1597. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Heilmann, Stefan and Wielage, Bernhard (2012) Adhesion and degradation of fitted Titanium-PEEK interface within Titanium-CF/PEEK Laminates. Euromat 2013, 2013-09-08 - 2013-09-13, Sevilla, Spanien. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Heilmann, Stefan and Wielage, Bernhard and Wischek, Janine (2013) Bruchmechanische Untersuchung der optimierten Titan-PEEK Grenzfläche in thermoplastischen Titan-CF/PEEK Laminaten durch Mixed Mode Bending Versuche. Verlag Stahleisen GmbH, Düsseldorf. Tagung Werkstoffprüfung 2013, 2013-11-28 - 2013-11-29, Neu-Ulm, Deutschland. ISBN 978-3-514-00806-9. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Wielage, Bernhard (2011) Einfluss von thermischen Nachbehandlungen auf die mechanischen Eigenschaften von hybriden Ti-CF/PEEK Laminaten. Eigenverlag, Chemnitz. 18. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2011-03-30 - 2011-04-01, Chemnitz, Deutschland. ISBN 978-3-00-033801-4. ISSN 1439-1597. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Wielage, Bernhard (2011) Fatigue properties of hybrid Ti/CFRP laminates. Review of Aeronautical Fatigue, Investigations in Germany during the Period May 2009 to April 2011. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Wielage, Bernhard (2011) On the Bonding Strength Degradation by Humidity of Different Titanium-PEEK Interfaces. 16th International Conference on Composite Structures (ICCS 16), 2011-06-28 - 2011-06-30, Porto, Portugal. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Wielage, Bernhard (2012) Properties of thermoplastic Fibre Metal Laminates (FML) - Titanium PEEK Interface. 15th European Conference on Composite Materials, 2012-06-24 - 2012-06-28, Venedig, Italien. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Wielage, Bernhard (2012) The stability of different titanium-PEEK interfaces against water. Materials Science and Engineering 2012, 2012-09-25 - 2012-09-27, Darmstadt, Deutschland. Volltext nicht online.

Schulze, Karola and Hausmann, Joachim and Wielage, Bernhard (2013) The stability of different titanium-PEEK interfaces against water. Procedia Materials Science (2), pp. 92-102. Elsevier. doi: 10.1016/j.mspro.2013.02.012. ISSN 2211-8128. Volltext nicht online.

Schulze, Karola and Naghipour, Parya and Hausmann, Joachim and Bartsch, Marion and Wielage, Bernhard (2011) Numerical and Experimental Investigation on Lap Shear Fracture of Ti/PEEK Joints. Review of Aeronautical Fatigue Investigations in Germany during the Perion May 2009 to April 2011. Volltext nicht online.

Schulze, Karola (2014) Metallische Strukturen und hybride Werkstoffsysteme - Untersuchung von Metall-Polymer-Grenzflächen. Treffen der Jung-DGM Ortsgruppe Rhein-Ruhr, 2014-04-02, Köln, Deutschland. Volltext nicht online.

Schulze, Karola (2017) Adhäsions- und Degradationsverhalten an der Grenzfläche zwischen Titan und Polyetheretherketon. Dissertation, Universitätsverlag der TU Chemnitz. Volltext nicht online.

Schulze, Karola and Haubrich, Jan and Hausmann, Joachim (2016) Hybrid Material Systems - Characterization of Titanium-PEEK bonding interfaces. Euro Hybrid Materials and Structures 2016, 2016-04-20 - 2016-04-21, Kaiserslautern, Deutschland. Volltext nicht online.

Schwanekamp, Tobias and Gussone, Joachim and Reuber, Martin (2020) Impact of laser irradiation on microstructure and phase development of tungsten carbide - cobalt. Procedia CIRP, 94, pp. 239-242. Elsevier. doi: 10.1016/j.procir.2020.09.045. ISSN 2212-8271.

Schwinde, Stefan (2009) Untersuchung des mechanischen Potentials von hybriden Laminaten aus CF-PEEK und hochplastischen Stählen. Bachelor's, Fachhochschule Jena. Volltext nicht online.

Schwinn, Julian and Alfaro Mercado, Ulises and Besel, Michael (2012) Tailored Welded Blanks für die Luftfahrt. Werkstoff-Kolloquium: Integrale Leichtbaustrukturen - Der Weg zum Rumpf von Morgen, 2012-12-04, Köln. Volltext nicht online.

Schwinn, Julian (2016) Dokumentation vorhandener Aluminiumlegierungen im Flugzeugbau. DLR-Interner Bericht. IB 334-01/16. Institut für Werkstoff-Forschung. 19 S. (Unpublished) Volltext nicht frei.

Schwinn, Julian (2018) Ermüdungsrissverhalten von Tailored Welded Blanks unter Berücksichtigung der Eigenspannungen und der Geometrie eines Dickenübergangs. Dissertation, RWTH Aachen. Volltext nicht frei.

Schwinn, Julian and Besel, Michael (2019) Determination of residual stresses in tailored welded blanks with thickness transition for crack assessment. Engineering Fracture Mechanics (208), pp. 209-220. Elsevier. doi: 10.1016/j.engfracmech.2019.01.010. ISSN 0013-7944. Volltext nicht online.

Schwinn, Julian and Besel, Michael and Alfaro Mercado, Ulises (2014) Crack propagation in tailored welded blanks joined by friction stir welding. International Conference on Fatigue Damage of Structural Materials X, 2014-09-21 - 2014-09-26, Hyannis, MA, USA. Volltext nicht online.

Schwinn, Julian and Besel, Michael and Alfaro Mercado, Ulises (2016) Experimental determination of accurate fatigue crack growth data in Tailored Welded Blanks. Engineering Fracture Mechanics, 163, pp. 141-159. Elsevier. doi: 10.1016/j.engfracmech.2016.07.006. ISSN 0013-7944. Volltext nicht online.

Schwinn, Julian and Breitbarth, Eric and Beumler, Thomas and Requena, Guillermo (2019) Blunt Notch Strength of AA2024 3-3/2-0.4 Fibre Metal Laminate Under Biaxial Tensile Loading. Metals, 9(4) (413). Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/met9040413. ISSN 2075-4701.

Schwinn, Julian and Kohlgrüber, Dieter and Breitbarth, Eric and Besel, Michael (2016) Biaxiale Versuche an rumpfstrukturnahen Proben mit realistischen Lastannahmen. In: Deutscher Luft- und Raumfahrtkongress, pp. 1-7. Deutscher Luft- und Raumfahrtkongress 2016, 2016-09-13 - 2016-09-15, Braunschweig.

Schöffler, Robin and Winkelmann, Peter and Kasperovich, Galina and Lakemann, Moritz and Petersen, Anna and Ebel, Paul-Benjamin and Haubrich, Jan (2023) Aero-Thermal Design and Numerical Investigation of an Additively Manufactured High-Pressure Turbine Vane. Deutscher Luft- und Raumfahrtkongress 2023, 2023-09-19 - 2023-09-21, Stuttgart, Deutschland. Volltext nicht online.

Schöne, Vanessa and Paysan, Florian and Breitbarth, Eric (2022) Lokale mehrachsige Rissbeanspruchung bei Bruchflächenverdrehen. DVM AK Mixed Mode, 2022-07-14, Köln, Deutschland. Volltext nicht frei.

Schöne, Vanessa and Paysan, Florian and Melching, David and Strohmann, Tobias and Breitbarth, Eric (2023) Identifikation und Charakterisierung dreidimensionaler Rissausbreitungsvorgänge mittels DIC. DVM Arbeitskreis "Bruchmechanik und Bauteilsicherheit", 2023-02-14 - 2023-02-15, Darmstadt. doi: 10.48447/Br-2022-BB. Volltext nicht frei.

Schöne, Vanessa and Paysan, Florian and Strohmann, Tobias and Melching, David and Breitbarth, Eric (2023) Experimentelle und numerische Untersuchung der Mehrachsigkeit bei Scherbrüchen. AK Mixed Mode, 2023-07-07, Kassel, Deutschland. Volltext nicht frei.

Silva, E.P. and Buzolin, R.H. and Alfaro Mercado, Ulises and Requena, Guillermo and Pinto, H.C. (2021) Microstructure and mechanical behavior of similar butt-joints of ZK60 and ZK60–1.5RE magnesium alloys produced by linear friction stir welding. Journal of Magnesium and Alloys (9), pp. 1782-1796. National Engineering Research Center for Magnesium Alloys of China, Chongqing University. doi: 10.1016/j.jma.2021.04.012. ISSN 2213-9567.

Silva, E.P. and Buzolin, R.H. and Marques, F. and Soldera, F. and Alfaro Mercado, Ulises and Pinto, H.C. (2020) Effect of Ce-base mischmetal addition on the microstructure and mechanical properties of hot-rolled ZK60 alloy. Journal of Magnesium and Alloys (9), pp. 995-1006. National Engineering Research Center for Magnesium Alloys of China, Chongqing University. doi: 10.1016/j.jma.2020.09.018. ISSN 2213-9567.

Simonelli, Marco and Graham McCartney, David and Barriobero Vila, Pere and Aboulkhair, Nesma and Tse, Yau Yau and Clare, Adam and Hague, Richard (2020) The Influence of Iron in Minimizing the Microstructural Anisotropy of Ti-6Al-4V Produced by Laser Powder-Bed Fusion. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 51, pp. 2444-2459. Springer. doi: 10.1007/s11661-020-05692-6. ISSN 1073-5623. Volltext nicht frei.

Starostin-Penner, Denis (2020) Neuronale Netze zur Erkennung von Ermüdungsrissen basierend auf digitaler Bildkorrelation. Master's, Hochschule Koblenz. Volltext nicht frei.

Strohmann, Tobias (2017) Ermittlung bruchmechanischer Kennwerte mittels digitaler Bildkorrelation. Master's, Universität Duisburg-Essen. Volltext nicht frei.

Strohmann, Tobias (2021) Mechanismenorientierte Analyse des Rissausbreitungsverhaltens einer freiformgeschmiedeten AA7010-T7452-Legierung. Dissertation, RWTH Aachen University. Volltext nicht online.

Strohmann, Tobias and Barriobero Vila, Pere and Gussone, Joachim and Melching, David and Stark, Andreas and Schell, Norbert and Requena, Guillermo (2022) Can unsupervised machine learning boost the analysis of my synchrotron diffraction data (on-site)? MSE 2022 Congress, 2022-09-27 - 2022-09-29, Darmstadt. Volltext nicht frei.

Strohmann, Tobias and Barriobero Vila, Pere and Gussone, Joachim and Melching, David and Stark, Andreas and Schell, Norbert and Requena, Guillermo (2022) Can unsupervised machine learning boost the on-site analysis of in situ synchrotron diffraction data? Scripta Materialia. Elsevier. doi: 10.1016/j.scriptamat.2022.115238. ISSN 1359-6462.

Strohmann, Tobias and Breitbarth, Eric and Besel, Michael and Zaunschirm, Stefan and Requena, Guillermo (2019) Anisotropes Rissausbreitungsverhalten einer freiformgeschmiedeten, hochfesten AA7010-T7652 Legierung. Werkstoffwoche 2019, 2019-09-18 - 2019-09-20, Dresden. Volltext nicht online.

Strohmann, Tobias and Breitbarth, Eric and Besel, Michael and Zaunschirm, Stefan and Witulski, Thomas and Requena, Guillermo (2022) Damage Mechanisms and Anisotropy of an AA7010-T7452 Open-Die Forged Alloy: Fatigue Crack Propagation. Materials, 15 (11). Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/ma15113771. ISSN 1996-1944.

Strohmann, Tobias and Bugelnig, Katrin and Breitbarth, Eric and Mockenhaupt, Florian and Requena, Guillermo and Wilde, Fabian and Steffens, Thomas and Germann, Holger and Boller, Elodie (2020) Fast segmentation of 3D and 4D tomography using deep learning. Werkstoff-Kolloquium, 2020-12-01, online, Köln. Volltext nicht online.

Strohmann, Tobias and Bugelnig, Katrin and Breitbarth, Eric and Wilde, Fabian and Requena, Guillermo (2021) Schnelle Segmentierung von Synchrotron-Tomografie mittels Deep Learning. DGM Arbeitskreis Röntgentomografie, 2021-05-26, online. Volltext nicht online.

Strohmann, Tobias and Bugelnig, Katrin and Breitbarth, Eric and Wilde, Fabian and Requena, Guillermo (2022) Fast Segmentation Of Synchrotron Tomography Data Using Convolutional Neural Networks. 9th GACM Colloquium on Computational Mechanics, 2022-09-21 - 2022-09-23, Essen. Volltext nicht frei.

Strohmann, Tobias and Bugelnig, Katrin and Breitbarth, Eric and Wilde, Fabian and Steffens, Thomas and Germann, Holger and Requena, Guillermo (2019) Semantic segmentation of synchrotron tomography of multiphase Al-Si alloys using a convolutional neural network with a pixel-wise weighted loss function. Scientific Reports (9). Nature Publishing Group. doi: 10.1038/s41598-019-56008-7. ISSN 2045-2322. Volltext nicht online.

Strohmann, Tobias and Bugelnig, Katrin and Gussone, Joachim and Barriobero Vila, Pere and Stark, A. and Wilde, Fabian and Melching, David and Schell, Norbert and Villanova, Julie and Boller, Elodie and Bode, Felix and Wielenberg, Christoph and Breitbarth, Eric and Requena, Guillermo (2023) Using AI for synchrotron data analysis. DESY Photon Science Users' Meeting 2023, 2021-01-26 - 2021-01-27, Hamburg. Volltext nicht online.

Strohmann, Tobias and Bugelnig, Katrin and Tumminello, Silvana and Requena, Guillermo (2023) Applied machine learning for rapid alloy development. AI MSE, 2023-11-22 - 2023-11-23, Saarbrücken, Deutschland. Volltext nicht frei.

Strohmann, Tobias and Melching, David and Breitbarth, Eric and Requena, Guillermo (2021) Automatic detection of fatigue crack paths using digital image correlation and deep neural networks. Materials Week 2021, 2021-09-07 - 2021-09-09, online.

Strohmann, Tobias and Melching, David and Requena, Guillermo and Breitbarth, Eric (2022) Automatic detection of fatigue cracks using neural networks and digital image correlation. International Conference on Advanced Manufacturing, online. Volltext nicht online.

Strohmann, Tobias and Paysan, Florian and Melching, David and Dietrich, Eric and Breitbarth, Eric and Requena, Guillermo (2023) Werkstoffmechanische Prüfung der nächsten Generation: Rissfortschritt komplexer Rumpfstrukturen. Deutscher Luft- und Raumfahrtkongress (DLRK) 2023, 2023-09-19 - 2023-09-21, Stuttgart. Volltext nicht frei.

Strohmann, Tobias and Paysan, Florian and Melching, David and Dietrich, Eric and Requena, Guillermo and Breitbarth, Eric (2022) Fatigue crack growth experiments in the 2020th. MSE 2022 Congress, 2022-09-27 - 2022-09-29, Darmstadt. Volltext nicht frei.

Strohmann, Tobias and Starostin-Penner, Denis and Breitbarth, Eric and Requena, Guillermo (2021) Automatic detection of fatigue crack paths using digital image correlation and convolutional neural networks. Fatigue & Fracture of Engineering Materials & Structures (44), pp. 1336-1348. Wiley. doi: 10.1111/ffe.13433. ISSN 8756-758X.

Sutter, Florian and Kennedy, Cheryl and Meyen, Stephanie and Schmücker, Martin (2010) Methoden zur Charakterisierung und Identifikation der Degradation an Reflektoroberflächen. In: 13. Kölner Sonnenkolloquium. 13. Kölner Sonnenkolloquium, 2010-06-29, Köln.

Theofilatos, Angelos and Rödler, Georg and Haubrich, Jan and Requena, Guillermo and Hecht, U. and Laqua, Romuald and Weisheit, Andreas and Sket, Frederico and Milenkovic, Sridjan and Granasy, Laszlo and Pusztai, Tamas and Rátkai, L. (2018) Ultrafine Fe-Fe2Ti eutectics produced by laser metal deposition: processing and characterization. Material Science and Engineering MSE 2018, 2018-09-25 - 2018-09-27, Darmstadt. Volltext nicht online.

Tiefers, Rüdiger and Aguilar, Julio and Dresbach, Christian and Buske, Clemens and Schmidt, Thomas and Zur, Sascha (2014) Titanium Aluminide Turbine Toolbox – A new tool for optimizing the design process for gamma-TiAl low pressure turbine blades. 28th International Congress 'Excellence in the art of Investment Casting', 2014-06-15 - 2014-06-18, Lugano, Switzerland. Volltext nicht online.

Tireira, Aly and Requena, Guillermo and Sao Jao, S and Borbely, Andras and Klocker, Helmut (2016) Rupture of intermetallic networks and strain localization in cast AlSi12Ni alloy: 2D and 3D characterization. Acta Materialia, 112, pp. 162-170. Elsevier. doi: 10.1016/j.actamat.2016.04.020. ISSN 1359-6454. Volltext nicht frei.

Tolnai, Domonkos and Gavras, Sarkis and Barriobero Vila, Pere and Stark, Andreas and Schell, Norbert (2020) Effect of Gd and Nd Additions on the Thermo-Mechanical Response of a MgMn Alloy. In: Magnesium Technology 2020 Springer. pp. 37-42. doi: 10.1007/978-3-030-36647-6_8. ISBN 978-3-030-36647-6. ISSN 978-3-030-36646-9. Volltext nicht frei.

Tumminello, S. and Gussone, J. and Fries, S. G. and Rackel, M. and Stark, A. and Schell, N. and Barriobero Vila, P. and Haubrich, J. and Requena, G. (2022) Simulations of precipitation kinetics for an ICME framework: an example on Ti2AlNb-based alloys. Hero-m 2i seminar, 2022-11-17, Stockholm, Sweden. Volltext nicht online.

Tumminello, S. and Gussone, J. and Rackel, M. and Stark, A. and Schell, N. and Barriobero-Vila, P. and Haubrich, J. and Requena, G. (2022) Simulations of precipitation kinetics in Ti2AlNb-based multiphase alloys synthesized by laser powder bed fusion. International Materials Science and Engineering Congress, 2022-09-27 - 2022-09-29, Germany.

Vallejos, Juan Manuel and Barriobero Vila, Pere and Gussone, Joachim and Haubrich, Jan and Kelm, Klemens and Stark, Andreas and Schell, Norbert and Requena, Guillermo (2021) In Situ High-Energy Synchrotron X-Ray Diffraction Reveals the Role of Texture on the Activation of Slip and Twinning during Deformation of Laser Powder Bed Fusion Ti–6Al–4V. Advanced Engineering Materials, pp. 1-12. Wiley. doi: 10.1002/adem.202001556. ISSN 1438-1656.

Vilà, Joaquim and Sket, Federico and Wilde, Fabian and Requena, Guillermo and González, Carlos and LLorca, Javier (2015) An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography. Composites Science and Technology, 119, pp. 12-19. Elsevier. doi: 10.1016/j.compscitech.2015.09.016. ISSN 0266-3538. Volltext nicht online.

Vollmer, M and Degener, S and Bolender, A and Bauer, A and Liehr, A and Stark, A. and Schell, Norbert and Barriobero-Vila, P. and Requena, Guillermo and Niendorf, Thomas (2023) Time resolved insights into abnormal grain growth by in situ synchrotron measurements. Acta Materialia, 257. Elsevier. doi: 10.1016/j.actamat.2023.119168. ISSN 1359-6454. Volltext nicht frei.

Warchomicka, Fernando and Zehetner, Egon and Poletti, Cecilia and Stark, Andreas and Requena, Guillermo (2016) Microstructure Tracking of Ti‐6Al‐4V by In‐Situ Synchrotron Diffraction During Thermomechanical Process in Beta Field. In: Proceedings of the 13th World Conference on Titanium. Wiley. 13th World Conference on Titanium, 2015-08-16 - 2015-08-20, San Diego, USA. doi: 10.1002/9781119296126. ISBN 9781119293668. Volltext nicht frei.

Watermeyer, Philipp (2013) Die Metallographie der Titanlegierungen. In: Titan. Titan und Titanlegierungen, 2013-03-20 - 2013-03-21, Köln. Volltext nicht online.

Watermeyer, Philipp (2014) Die Mikroanalytik der Titanlegierungen. Titan und Titanlegierungen, 2014-03-19 - 2014-03-20, Köln. Volltext nicht online.

Watermeyer, Philipp (2015) Die Mikroanalytik der Titanlegierungen. Titan und Titanlegierungen, 2015-03-18 - 2015-03-19, Köln. Volltext nicht online.

Watermeyer, Philipp (2018) Mikroanalytik von Titanlegierungen. Titan-Seminar, 2018-03-14 - 2018-03-15, Köln. (Unpublished) Volltext nicht online.

Wielage, Bernd and Weber, Daisy and Kroll, Lothar and Tröltzsch, Jürgen and Hausmann, Joachim (2009) Leicht und hochfest - Verbunde aus Kunststoff und Metall. Materialica, München. Volltext nicht online.

Wu, Shuang and Delp, Alexander and Freund, Jonathan and Walther, Frank and Haubrich, Jan and Löbbecke, Miriam and Tröster, Thomas (2023) Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process. Journal of Adhesion. Taylor & Francis. doi: 10.1080/00218464.2023.2245758. ISSN 0021-8464.

Zehnder, Christoffer (2012) Investigation of Mechanical Properties of Fibre Metal Laminates based on a Thermoplastic Resin. Bachelor's, Rheinisch-Westälische Technische Hochschule Aachen. Volltext nicht online.

Zhang, Xingxing and Bauer, Peter-Philipp and Lutz, Andreas and Wielenberg, Christoph and Palm, Frank and GAN, W.M. and Maawad, Emad (2023) Microplasticity and macroplasticity behavior of additively manufactured Al-Mg-Sc-Zr alloys: In-situ experiment and modeling. International Journal of Plasticity. Elsevier. doi: 10.1016/j.ijplas.2023.103659. ISSN 0749-6419.

Zubair, M. and Sandlöbes-Haut, S. and Wollenweber, M.A. and Bugelnig, Katrin and Kusche, C.F. and Requena, Guillermo and Korte-Kerzel, S. (2019) Strain heterogeneity and micro-damage nucleation under tensile stresses in an Mg–5Al–3Ca alloy with an intermetallic skeleton. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing (767), pp. 138-414. Elsevier. doi: 10.1016/j.msea.2019.138414. ISSN 0921-5093. Volltext nicht online.

bönisch, Matthias and Van Bael, Albert and Seefeldt, Marc and Barriobero Vila, Pere and Requena, Guillermo and Sanchez, Nuria and Cooreman, Steven (2020) Unravelling Anisotropy Evolution during Spiral Pipe Forming: a Multiscale Approach. Procedia Manufacturing, 47 (-), pp. 1434-1441. Elsevier. doi: 10.1016/j.promfg.2020.04.310. ISSN 2351-9789. Volltext nicht frei.

da Silva, Julio Cesar and Barriobero Vila, Pere and Bugelnig, Katrin and Hecht, Ulrike and Gussone, Joachim and Cloetens, Peter and Sket, Federico and Haubrich, Jan and Requena, Guillermo (2019) Characterization of alloys for a new generation of metals for additive manufacturing by Near-Field Ptychographic Tomography. UDM3: Exploiting coherent X-rays at ESRF, 2019-02-06, Grenoble, Frankreich. Volltext nicht online.

da Silva, Julio Cesar and Haubrich, Jan and Requena, Guillermo and Hubert, Maxime and Parcureanu, Alexandra and Bloch, Leonid and Yang, Yang and Cloetens, Peter (2018) High energy near- and far-field ptychographic tomography at the ESRF. In: SPE Proceedings - Photonics, 10391, pp. 1039106-1. SPIE Proceedings. SPIE Conference Photonics West, 2018-01-27 - 2018-02-01, San Francisco, USA. doi: 10.1117/12.2272971. Volltext nicht online.

van Enkhuizen, Marinus Johannus and Dresbach, Christian and Reh, Stefan (2013) Determining local material properties via inverse parameter identification of instrumented indentation experiments. NAFEMS World Congress NWC2013, 2013-06-09 - 2013-06-12, Salzburg, Österreich. ISBN 978 1 874376 91 0. Volltext nicht online.

van Enkhuizen, Marinus Johannus (2016) Development of a validation method for multivariate arbitrarily distributed results. Vortrag an der RWTH Aachen, Institut für Bildsame Formgebung, 2016-10-24, IBF RWTH Aachen, Deutschland. Volltext nicht online.

van Enkhuizen, Marinus Johannus (2017) Development of a validation method for multivariate arbitrarily distributed results. Dissertation, RWTH Aachen. Volltext nicht online.

van Enkhuizen, Marinus Johannus and Dresbach, Christian and Reh, Stefan and Kuntzagk, Stefan (2017) Efficient Lifetime Prediction of High Pressure Turbine Blades in Real Life Conditions. ASME Turbo Expo 2017, 2017-06-26 - 2017-06-30, Charlotte, USA. doi: 10.1115/GT2017-63341. Volltext nicht online.