Items where Subject is "Institut für Systemleichtbau > Multifunctional Materials"
![]() | Up a level |
- Institutes and Facilities (142462)
- Institut für Systemleichtbau (507)
- Multifunctional Materials (69)
- Institut für Systemleichtbau (507)
Number of items at this level: 69.
Adam, Till Julian (2023) Advanced reinforcements für neue effiziente Antriebs- und Flugzeugkonfigurationen. Other. Other. | ![]() |
Adam, Till Julian (2024) Überwachung hochbelasteter Bolzenverbindungen. Other. Other. | ![]() |
Arash, Behrouz and Zakavati, Shadab and Bahtiri, Betim and Jux, Maximilian and Rolfes, Raimund (2024) Phase-field modeling of fracture in viscoelastic–viscoplastic thermoset nanocomposites under cyclic and monolithic loading. Engineering with Computers, pp. 1-21. Springer Nature. doi: 10.1007/s00366-024-02041-8. ISSN 0177-0667. | ![]() |
Bachmann, Jens and Titze, Maik and Kühnast, Fabian (2023) Kreislaufführung in der additiven Fertigung. Other. Other. | ![]() |
Bahtiri, Betim and Arash, Behrouz and Scheffler, Sven and Jux, Maximilian and Rolfes, Raimund (2024) A thermodynamically consistent physics-informed deep learning material model for short fiber/polymer nanocomposites. Computer Methods in Applied Mechanics and Engineering, 427 (1), pp. 1-23. Elsevier. doi: 10.1016/j.cma.2024.117038. ISSN 0045-7825. | ![]() |
Bahtiri, Betim and Arash, Behrouz and Scheffler, Sven and Jux, Maximilian and Rolfes, Raimund (2023) A machine learning-based viscoelastic–viscoplastic model for epoxy nanocomposites with moisture content. Computer Methods in Applied Mechanics and Engineering (415). Elsevier. doi: 10.1016/j.cma.2023.116293. ISSN 0045-7825. | ![]() |
Behr, Christian (2023) Entwurfsmethodik für adaptive Strukturen mit multilateralen Konformitätskriterien. DLR-Forschungsbericht. DLR-FB-2023-5. Dissertation. Technische Universität Braunschweig. 103 S. doi: 10.57676/nnwg-6y40. | ![]() |
Behrens, Tim and Moix-Bonet, Maria and Schmidt, Daniel and Wierach, Peter (2024) Predicting damage location information based on single actuator-sensor-path information using regularised multilinear regression. In: 11th European Workshop on Structural Health Monitoring, EWSHM 2024. ndt.net. 11th European Workshop on Structural Health Monitoring, EWSHM 2024, 2024-06-10 - 2024-06-13, Potsdam, Deutschland. doi: 10.58286/29819. ISSN 1435-4934. | ![]() |
Bendin, Jonathan and Jux, Maximilian and Mahrholz, Thorsten (2023) Nanomodifizierte Klebstoffsysteme - Materialverhalten unter realistischen Einsatzbedingungen und fertigungstechnische Aspekte. DLR-Interner Bericht. DLR-IB-SY-BS-2023-31. Master's. TU Braunschweig. 158 S. Volltext nicht frei. | ![]() |
Beyland, Lutz and Hindersmann, Arne and Bäns, Constantin and Keck, Jan and Prussak, Robert and Mahrholz, Thorsten (2024) High strength bolted joints for rotor blades with fibre metal Laminates. In: Wind Turbine Blades 2024, 2024. AMI Plastics. Wind Turbine Blades 2024, 2024-12-15 - 2024-12-17, Deutschland, Düsseldorf. Volltext nicht online. |
Binder, Svea and Kühn, Alexandra (2023) Prognose der Ergebnisse von Brandprüfungen mittels Methoden des maschinellen Lernens auf Basis von kalorimetrischen Messungen. DLR-Interner Bericht. DLR-IB-SY-SD-2023-43. Bachelor's. FH Münster. 81 S. Volltext nicht frei. | ![]() |
Böse, Frederic and Johannsen, Erik and Kühnast, Fabian (2023) Untersuchung des Zusammenhanges zwischen Abkühlverhalten und qualitätskritischen Bauteileigenschaften im Großformat-3D-Druck. DLR-Interner Bericht. DLR-IB-SY-BS-2023-59. Master's. TU Braunschweig. 125 S. Volltext nicht frei. | ![]() |
Dluzak, T. and Koch, S.M. and Geier, S. and Meller, F. and Anton, R. and Schulz, U. and Wierach, P. and Witte, K. and Leuko, S. and Moeller, R. and Cortesao, M. (2023) “Keimfreies Fliegen”: An Interdisciplinary Approach for Microbial Safeguarding of the Airplane Cabin Using Novel Antimicrobial Materials. FEMS EUROMAT 2023, 2023-09-03 - 2023-09-07, Frankfurt am Main, Germany. Volltext nicht online. |
Galiana, Shankar and Moix-Bonet, Maria and Schmidt, Daniel and Wierach, Peter (2024) The effect of low temperatures on monitoring structural health using acoustic-ultrasonic piezoelectric transducers on composite structures. In: 11th European Workshop on Structural Health Monitoring, EWSHM 2024. NDT.net. 11th European Workshop on Structural Health Monitoring, EWSHM 2024, 2024-06-10 - 2024-06-13, Postdam, Germany. doi: 10.58286/29667. | ![]() |
Galiana, Shankar and Moradi, Morteza and Wierach, Peter and Zarouchas, Dimitrios (2024) Innovative welding integration of acousto-ultrasonic composite transducers onto thermoplastic composite structures. Structural Health Monitoring. SAGE Publications. doi: 10.1177/14759217241247766. ISSN 1475-9217. Volltext nicht frei. | ![]() |
Galiana, Shankar and Moradi, Morteza and Wierach, Peter and Zarouchas, Dimitrios (2023) ACOUSTO-ULTRASONIC COMPOSITE TRANSDUCERS INTEGRATION INTO THERMOPLASTIC COMPOSITE STRUCTURES VIA ULTRASONIC WELDING. Eccomas Procedia. 10th ECCOMAS Thematic Conference on Smart Structures and Materials, 2023-07-03 - 2023-07-05, Patras, Greece. doi: 10.7712/150123.9847.444412. | ![]() |
Garbade, Marc and Schmidt, Daniel and Moix-Bonet, Maria and Baaran, Jens (2024) Displam: Calculation of the phase velocity of Lamb waves in plate composite structures (Version 1.5.0). [Other] Volltext nicht online. |
Geier, Sebastian (2023) Strukturintegrierte Superkondensatoren miniaturisieren elektrische Antriebe. Other. Other. | ![]() |
Geier, Sebastian and Koch, Stella Marie and Kühnast, Fabian and Wierach, Peter and Moeller, Ralf (2023) Anti-microbial surfaces for use in aircraft cabins. In: Proceedings - 2023 8th Smart Materials and Surfaces Conference. Sector. 8th Smart Materials and Surfaces Conference (SMS) 2023, 2023-10-25 - 2023-10-27, Albufeira, Portugal. (Submitted) Volltext nicht online. |
Geier, Sebastian and Kühnast, Fabian and Timofeev, Stella Marie and Talai, Iman and Wierach, Peter (2024) Antimicrobial surfaces for aircraft cabins. 2nd Conference on Smart Materials & Structures, 2024-07-22 - 2024-07-23, Berlin, Deutschland. Volltext nicht online. |
Geier, Sebastian and Petersen, Jan and Wierach, Peter (2024) REALIZATION AND SPACE-QUALIFICATION OF A SOLAR COMPOSITE PANEL WITH INTEGRATED SUPERCAPACITORS. In: 17th Annual Conference of the Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2024 (140468). American Society of American Engineers. Conference on Smart Materials, Adaptive Structures, and Intelligent Systems SMASIS2024, 2024-09-09 - 2024-09-11, Atlanta, GA, USA. doi: 10.1115/SMASIS2024-140468. ISBN 978-079188832-2. Volltext nicht frei. | ![]() |
Govers, Yves and Gnebner, Kevin and Gundlach, Janto and Tang, Martin and Thiem, Carsten and Knebusch, Johannes and Buchbach, Ralf and Sinske, Julian and Soal, Keith Ian and Schwochow, Jan and Winter, Rene and Hach, Oliver and Verdonck, Hendrik and Hennings, Holger and Opitz, Steffen and Moix-Bonet, Maria and Garbade, Marc and Kühn, Michael and Liebers, Nico and Prussak, Robert and Jauken, Helge and Liesecke, Leon and Wölk, Philipp and Seume, Jörg R. and Messing, Ralf and Troyke, Alexander and Bertolotti, Fabio (2023) German research wind farm WiValdi: Planning, installation and testing of innovative research instrumentation for six wind turbine rotor blades. Wind Energy Science Conference, 2023-05-23 - 2023-05-26, Glasgow, Großbritannien. (Unpublished) Volltext nicht online. |
Iyer, Vasan and Kumar, Sandeep and Pettersson, Håkan and Petersen, Jan and Geier, Sebastian and Wierach, Peter (2025) Multifunctional characterization of high tensile strength PEO/PVP blend based composites with InAs nanowire fillers for structural sodium ion batteries. ACS Applied Nano Materials. American Chemical Society. ISSN 2574-0970. (Submitted) Volltext nicht frei. | ![]() |
Iyer, Vasan and Petersen, Jan and Geier, Sebastian and Wierach, Peter (2024) Design and Characterization of Poly(ethylene oxide)-Based Multifunctional Composites with Succinonitrile Fillers for Ambient-Temperature Structural Sodium-Ion Batteries. Polymers, 16 (19), p. 2806. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/polym16192806. ISSN 2073-4360. | ![]() |
Iyer, Vasan and Petersen, Jan and Geier, Sebastian and Wierach, Peter (2024) Development and Multifunctional Characterization of a Structural Sodium-Ion Battery Using a High-Tensile-Strength Poly(ethylene oxide)-Based Matrix Composite. ACS Applied Energy Materials, 7 (9), pp. 3968-3982. American Chemical Society (ACS). doi: 10.1021/acsaem.4c00281. ISSN 2574-0962. | ![]() |
Jux, Maximilian (2023) Klein, kleiner, nano - wie Nanopartikel die Leistungsfähigkeit von Klebstoffen für Windkraftrotorblätter steigern. Other. Other. | ![]() |
Jux, Maximilian (2023) Low Viscosity Nano-Resins for VARI- and RTM-produced Composite Structures. EASN International Conference on: "Innovation in Aviation & Space for opening New Horizons", 2023-09-05 - 2023-09-08, Salerno, Italien. Volltext nicht online. |
Kreikemeier, Janko and Schmidt, Daniel (2018) Final Document on Summary of work for Final document on future fuselage architecture. DLR-Interner Bericht. DLR-IB-SY-BS-2024-25. Project thesis. 56 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2016) ICASUS – One Pager Collection. DLR-Interner Bericht. DLR-IB-SY-BS-2024-40. Project thesis. 202 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2016) ICASUS – Draft Report on DLR Preliminary Results in Clean Sky 2 Large Passenger Aircraft. DLR-Interner Bericht. DLR-IB-SY-BS-2024-39. Project thesis. 104 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2021) L-Pull and Lapshear Test Campaign, interim report. DLR-Interner Bericht. DLR-IB-SY-BS-2024-33. Project thesis. 43 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2019) Verified damage model for prediction of failure of welding zone. DLR-Interner Bericht. DLR-IB-SY-BS-2024-27. Project thesis. 25 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2019) The L-pull and lapshear test campaigns. DLR-Interner Bericht. DLR-IB-SY-BS-2024-26. Project thesis. 18 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2018) Final Document on Future Fuselage Architecture, Material Options and Product Breakdown Structure to show the Build Concept. DLR-Interner Bericht. DLR-IB-SY-BS-2024-23. Project thesis. 54 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2017) Demonstrator Baseline. DLR-Interner Bericht. DLR-IB-SY-BS-2024-22. Project thesis. 15 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2017) Means of Compliance. DLR-Interner Bericht. DLR-IB-SY-BS-2024-21. Project thesis. 54 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2016) Requirements and Functions for Fuselage Architecture. DLR-Interner Bericht. DLR-IB-SY-BS-2024-16. Project thesis. 39 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel (2019) Maturation of Joining Technologies. DLR-Interner Bericht. DLR-IB-SY-BS-2024-24. Project thesis. 56 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schmidt, Daniel and Kolbe, Andreas (2019) TP AFP Xenon and Laser heating technology. DLR-Interner Bericht. DLR-IB-SY-BS-2024-28. Project thesis. 16 S. Volltext nicht frei. | ![]() |
Kreikemeier, Janko and Schulze, Karola and Schmidt, Daniel (2016) Preliminary Document on Material Options. DLR-Interner Bericht. DLR-IB-SY-BS-2024-20. Project thesis. 17 S. Volltext nicht frei. | ![]() |
Kroos, Karina and Diniz, Sabrina and Bachmann, Jens and Chakraborty, Souvik and Kühnast, Fabian and Schmidt, Jan-Uwe Reinhard and Opitz, Steffen (2024) FILAMENTS FOR ADDITIVE MANUFACTURING REINFORCED WITH CARBON FIBERS FROM WASTE STREAM. In: Proceedings of ECCM21: Volume 7 - Life cycle performance. The European The European Society for Composite Materials (ESCM) and the Ecole Centrale de Nantes.. 21st European Conference on Composite Materials, 2024-07-02 - 2024-07-05, Nantes, France. doi: 10.60691/yj56-np80. ISBN 978-2-912985-01-9. | ![]() |
Kühn, Alexandra and Brauer, Christoph and Monkiewitsch, Monika (2024) Ich sehe was, was Du nicht siehst - Vorhersage von Brandprüfungsergebnissen mittels KI. Other. Other. | ![]() |
Kühnast, Fabian and Kürzel, Malte-Andre (2025) Additive functionalization: Combining the benefits of Additive Manufacturing and conventional composite production by overprinting. Engineering Proceedings, 90 (1). Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/engproc2025090088. ISSN 2673-4591. | ![]() |
Kühnast, Fabian and Kürzel, Malte-Andre (2025) Additive Functionalization: Combining the Benefits of Additive Manufacturing and Conventional Composite Production by Overprinting. 14th EASN International Conference on Innovation in Aviation & Space towards sustainability today & tomorrow, 2024-10-08 - 2024-10-11, Thessaloniki, Greece. Volltext nicht online. |
Kühnast, Fabian and Titze, Maik (2023) Das richtige Material am richtigen Platz - multifunktionale Bauteile durch additive Fertigung. Other. Other. | ![]() |
Kürzel, Malte-Andre and Kühnast, Fabian (2023) Untersuchung des Einflusses von Oberflächenvorbehandlungsverfahren auf Direktfügeverbindungen zwischen Duromerkompositen und aufgedruckten Thermoplast-Formmassen. DLR-Interner Bericht. DLR-IB-SY-BS-2023-86. Master's. TU Clausthal. 158 S. Volltext nicht frei. | ![]() |
Lefevre, Jean and Rädel, Martin and Schuster, Andreas (2024) Ultrasonic Guided Waves data in Structural Health Monitoring design. 1st VMAP User Meeting 2024, 2024-02-14 - 2024-02-15, Sankt Augustin, Deutschland. Volltext nicht online. |
Lüders, Caroline and Ropte, Sven and Schmidt, Daniel and Liebisch, Martin (2024) Hydraulic burst pressure test of Type IV composite pressure vessel. [Other] Volltext nicht online. |
Mahrholz, Thorsten and Jux, Maximilian (2024) Mehr als nur ein Klebstoff - Sensorische Klebefugen zur Strukturüberwachung von Windkraftrotorblättern. Other. Other. | ![]() |
Mahrholz, Thorsten and Jux, Maximilian and Kaps, Robert (2023) Schlussbericht zum Verbundvorhaben HANNAH: Herausforderungen der industriellen Anwendung von nanomodifizierten und hybriden Werkstoffsystemen im Rotorblattleichtbau. Teilvorhaben: Experimentelle Charakterisierung von nanomodifizierten und hybriden Werkstoffsystemen unter realitätsnahen Umweltbedingungen. DLR-Interner Bericht. DLR-IB-SY-BS-2023-196. Project thesis. 182 S. Volltext nicht frei. | ![]() |
Markus, Marlene (2025) Funktionalisierung von Klebstoffharzen durch Matrixadditive für sensorische Anwendungen in Windrotorblättern. DLR-Interner Bericht. DLR-IB-SY-BS-2025-41. Master's. Christian-Albrechts-Universität zu Kiel. 97 S. Volltext nicht frei. | ![]() |
Memmolo, Vittorio and Moll, Jochen and Moix-Bonet, Maria and Schmidt, Daniel and Krozer, Viktor (2023) Ultra-wideband microwave leakage monitoring for stringer debonding detection in carbon composite fuselage structures. NDT and E International, 142 (103006). Elsevier. doi: 10.1016/j.ndteint.2023.103006. ISSN 0963-8695. Volltext nicht frei. | ![]() |
Memmolo, Vittorio and Moll, Jochen and Schackmann, Oliver and Freitag, Steffen and Volovikova, Anastasiia and Tschöke, Kilian and Savli, Enes and Lugovstova, Yevgeniya and Moix-Bonet, Maria and Bayoumi, Ahmed and Mueller, Inka (2023) Promoting novel strategies for the reliability assessment of guided wave based SHM systems. In: Structural Health Monitoring 2023 Designing SHM for Sustainability, Maintainability, and Reliability. DES tech Publications, Inc.. IWSHM 2023, 2023-09-12 - 2023-09-14, Stanford University, California, USA. Volltext nicht online. |
Moix-Bonet, Maria and Schmidt, Daniel and Eckstein, Benjamin and Wierach, Peter (2024) A Composite Fuselage under Mechanical Load: a case study for Guided Wave-based SHM. In: 11th European Workshop on Structural Health Monitoring, EWSHM 2024. NDT.net. EWSHM 2024, 2024-06-10, Potsdam, Deutschland. doi: 10.58286/29842. ISSN 1435-4934. | ![]() |
Moix-Bonet, Maria and Schmidt, Daniel and Eckstein, Benjamin and Wierach, Peter (2025) Load and Temperature Influence on a GW-SHM System for a Composite Fuselage. In: 9th Asia-Pacific Workshop on Structural Health Monitoring, APWSHM 2024, 50. Materials Research Forum journal. APWSHM 2024, 2024-12-08 - 2024-12-11, Sendai, Japan. doi: 10.21741/9781644903513-1. ISBN 978-1-64490-351-3. ISSN 2474-395X. | ![]() |
Moix-Bonet, Maria and Schmidt, Daniel and Wierach, Peter (2023) Guided Wave-based Structural Health Monitoring for a Composite Aircraft Fuselage under Mechanical Load. European Conference on Non-Destructive Testing 2023, 2023-07-03 - 2023-07-07, Lissabon, Portugal. Volltext nicht online. |
Petersen, Jan and Geier, Sebastian and Wierach, Peter (2023) Electric Propulsion System for Nano Satellites. EASN 2023 Innovation in Aviation & Space for opening New Horizons, 2023-09-05 - 2023-09-08, Salerno, Italy. Volltext nicht frei. | ![]() |
Schmidt, Daniel and Moix-Bonet, Maria and Petersen, Jan (2023) Structural Health Monitoring System - bereit für den Einsatz. Other. Other. | ![]() |
Schmidt, Daniel and Moix-Bonet, Maria and Petersen, Jan and Wierach, Peter (2024) SHM System Architecture based on Ultrasonic Guided Waves for Aircraft Application Scenarios. In: 11th European Workshop on Structural Health Monitoring, EWSHM 2024. 11th European Workshop on Structural Health Monitoring, 2024-06-10 - 2024-06-13, Potsdam, Germany. doi: 10.58286/29766. Volltext nicht online. |
Shah, Chirag and Behrens, Tim and Schmidt, Daniel and von Hehl, Axel (2024) Impact damage in aerospace structures: Investigating the impact characteristics of different standard aerospace grades of glass fibre reinforced aluminium laminate (GLARE®). Deutsche Gesellschaft für Materialkunde e.V.. 24. Symposium Verbundwerkstoffe und Werkstoffverbunde, Verbund 2024, 2024-05-22 - 2024-05-24, Freiburg. doi: 10.13140/RG.2.2.30344.12801. | ![]() |
Sofi, Tasdeeq and Gude, Maria R. and Avila, Javier and Wierach, Peter (2023) NOVEL PROCEDURE OF INTEGRATING TRANSDUCERS TO THERMOPLASTIC COMPOSITE STRUCTURES BY INDUCTION HEATING FOR SHM. 10th ECCOMAS Thematic Conference on Smart Structures and Materials, 2023-07-03 - 2023-07-05, Patras, Greece. doi: 10.7712/150123.9876.446068. | ![]() |
Sofi, Tasdeeq and Gude, Maria R. and Wierach, Peter and Martin, Isabel and Lorenzo, Martin (2023) An Efficient Procedure for Bonding Piezoelectric Transducers to Thermoplastic Composite Structures for SHM Application andIts Durability in Aeronautical Environmental Conditions. Sensors, 23 (10), p. 4784. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/s23104784. ISSN 1424-8220. | ![]() |
Stumpf, Xenia Sophia and Treptow, Jessica Marie and Nehls, Grace (2024) R&D projects, additively functionalized part demonstrate composites innovation. CompositesWorld. Gardner Business Media, Inc.. ISSN 2376-5232. | ![]() |
Vivar Perez, Juan Miguel and Raddatz, Florian (2015) Efficient numerical simulation method for lamb wave propagation and its verification. In: Structural Health Monitoring 2015: System Reliability for Verification and Implementation - Proceedings of the 10th International Workshop on Structural Health Monitoring, IWSHM 2015. DEStech Publications. 10th International Workshop on Structural Health Monitoring, 2015-09-01 - 2015-09-03, Stanford. doi: 10.12783/shm2015/108. ISBN 978-160595111-9. Volltext nicht online. |
Wierach, Peter and Schmidt, Daniel and Moix-Bonet, Maria and Behrens, Tim and Galiana, Shankar and Petersen, Jan (2024) Structural Health Monitoring in Composite Structures. Tagung Werkstoffprüfung, 2024-12-05 - 2024-12-06, Krefeld, Deutschland. Volltext nicht online. |
Wierach, Peter and Schmidt, Daniel and Moix-Bonet, Maria and Petersen, Jan and Galiana, Shankar and Behrens, Tim (2024) From The Lab to Real Structures - SHM Research at DLR. ILA SHM Session, 2024-06-09, Berlin, Germany. Volltext nicht online. |
Zellmann, Annika and Wierach, Peter and Jux, Maximilian and Mahrholz, Thorsten (2023) Herstellung und Charakterisierung von funktionalisierten Klebstoffen zur Schadensüberwachung an Rotorblättern von Windenergieanlagen. DLR-Interner Bericht. DLR-IB-SY-BS-2023-177. Master's. TU Clausthal. 212 S. Volltext nicht frei. | ![]() |
von Monkiewitsch, Monika (2023) Charakterisierung von Harzsystemen mittels DSC und ergänzender thermoanalytischer Methoden. 4. Klebstoffseminar, Materialcharakterisierung und Prozessüberwachung, 2023-09-12 - 2023-09-13, Jena, Deutschland. | ![]() |
von Monkiewitsch, Monika and Kühn, Alexandra (2023) Beschreibung von duroplastischen Zustandsänderungen während der Aushärtung mittels frequenzmodulierter DSC für die Prozessoptimierung. Messtechnische Möglichkeiten für eine effiziente Prozessgestaltung von Verbundwerkstoffen, 2023-03-15 - 2023-03-16, Dresden, Deutschland. | ![]() |