elib
DLR-Header
DLR-Logo -> http://www.dlr.de
DLR Portal Home | Imprint | Privacy Policy | Accessibility | Contact | Deutsch
Fontsize: [-] Text [+]

Items where Subject is "Institut für Systemleichtbau > Sustainability for Lightweight Structures"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 73.

  Albano, Joana and Rahn, Antonia and Bachmann, Jens and Wende, Gerko (2024) Life Cycle Inventories for Aviation: Addressing Data Shortcomings and Improvements. Brightcon 2024, 2024-09-25 - 2024-09-27, Hamburg, Deutschland. file

  Albano, Joana and Rahn, Antonia and Bachmann, Jens and Wende, Gerko (2024) Life cycle inventories for aviation: Background data, shortcomings, and improvements. Cleaner Engineering and Technology, 22, p. 100813. Elsevier. doi: 10.1016/j.clet.2024.100813. ISSN 2666-7908. file

  Albano, Joana and Rahn, Antonia and Bachmann, Jens and Wende, Gerko (2024) LIFE CYCLE INVENTORIES FOR AVIATION: Identifying sector-specific LCI shortcomings, translating fore- to background data, and enhancing dataset completeness for holistic aviation LCA analyses. Brightcon 2024, 2024-09-25 - 2024-09-27, Hamburg, Germany. file

  Albano, Joana and Rahn, Antonia and Bachmann, Jens and Wende, Gerko (2024) Life Cycle Inventories for Aviation: Background Data, Shortcomings, and Improvements. In: SETAC Europe 26th LCA Symposium. SETAC Europe 26th LCA Symposium, 2024-10-21 - 2024-10-23, Göteborg, Schweden. file

  Andres, Marcel and Kühn, Alexandra and Liebisch, Martin (2023) Brandschutz mit Composites – Mechanisches Verhalten unter Extrembedingungen und neue Ansätze zur Vorhersage der Brandschutzeigenschaften. CU – Innovation Day & MariLight Technologietransfer-Workshop, 2023-10-17, Lemwerder, Deutschland. Volltext nicht frei. file

  Appel, Christina and Gümbel, Clara (2025) CAA/CFD based noise prediction for wind turbines affected by leading-edge erosion. DAGA 2025, 2025-03-17 - 2025-03-20, Kopenhagen. file

  Bachmann, Jens (2024) Herausforderungen bei der Ökobilanzierung von Leichtbaustrukturen. DLR-Wissenschaftstag 2024– Nachhaltigkeit und Ressourceneffizienz durch Systemleichtbau, 2024-09-26, Braunschweig. file

  Bachmann, Jens (2024) Kreislaufwirtschaft und Leichtbau im Bausektor: Viel Potenzial für rezyklierte Kohlenstofffasern. Other. Other. file

  Bachmann, Jens and Arussi, Emma and Kühnast, Fabian and Kroos, Karina and Diniz, Sabrina and Opitz, Steffen (2025) Environmental impacts of recycling carbon fibre reinforced high-performance thermoplastics for aerospace composite structures and uncertainty from modelling choices. 12th International Conference on Life Cycle Management (LCM), 2025-09-08 - 2025-09-12, Palermo, Italien. file

  Bachmann, Jens and Diniz, Sabrina and Kroos, Karina and Opitz, Steffen and Zeisberg, Marcel and Niebel, Philipp-Karsten and Baumgärtel, Enrico (2024) Prospective Life Cycle Assessment of Recycled Carbon Fibres from a Solvolysis Process and their Potential Applications in the Transport and Building Sector. SETAC EUROPE 26TH LCA SYMPOSIUM, 2024-10-21 - 2024-10-23, Göteborg, Schweden. file

  Bachmann, Jens and Gerrits, Wilco and Blackwood, Andrew and Jose, Deepa (2023) Challenges in the Life Cycle Assessment of fibre reinforced polymers using the example of a composite aircraft interior shell. EASN Conference 2023, 2023-09-05 - 2023-09-08, Salerno, Italien. file

  Bachmann, Jens and Titze, Maik and Kühnast, Fabian (2023) Kreislaufführung in der additiven Fertigung. Other. Other. file

  Beyland, Lutz and Bachmann, Jens and Nickel, Jörg (2023) Nachhaltige Rotorblätter: Bewertung und Konzepte. Arbeitsgruppentreffen des Composit United "Faserverbund in der Windindustrie", 2023-05-09, Braunschweig. Volltext nicht frei. file

  Binder, Svea and Kühn, Alexandra (2023) Prognose der Ergebnisse von Brandprüfungen mittels Methoden des maschinellen Lernens auf Basis von kalorimetrischen Messungen. DLR-Interner Bericht. DLR-IB-SY-SD-2023-43. Bachelor's. FH Münster. 81 S. Volltext nicht frei. file

  Bülow, Christian and Kroos, Karina and Opitz, Steffen (2025) Costs and environmental impacts of a cryogenic H2 tank demonstrator. EASN 15, 2025-10-14 - 2025-10-17, Madrid, Spanien. file

  Chakraborty, Souvik and Kroos, Karina and Lossau, Matthias and Schmidt, Jan-Uwe Reinhard (2025) Sustainability through the process chain: turning fibre waste into reinforced filaments for AM with its economic side. EmpowerAX Science Day 2025, 2025-10-08, Stade, Germany. Volltext nicht frei. file

  Diniz, Sabrina (2023) Entwicklung einer Methodik zur vollständigen Ökobilanzierung von Polymersystemen am Beispiel ausgewählter Epoxidharze. DLR-Interner Bericht. DLR-IB-SY-BS-2024-54. Master's. Hochschule Hamm-Lippstadt. 74 S. Volltext nicht frei. file

  Diniz, Sabrina and Andres, Marcel and Bachmann, Jens and Opitz, Steffen and Winkler-Höhn, Robert (2025) Sustainability in train structures: An approach for LCA of new material combinations. OpenLCA.conf 2025, 2025-04-10 - 2025-04-11, Berlin, Deutschland. file

  Diniz, Sabrina and Bachmann, Jens and Kroos, Karina and Opitz, Steffen (2025) State of the art review: Investigation of various modeling strategies for chemicals in the field of synthetic resins. LCM 2025, 2025-09-09 - 2025-09-12, Palermo, Italien. file

  Diniz, Sabrina and Bachmann, Jens and Opitz, Steffen (2024) Development of an approach for the comprehensive life cycle assessment of an epoxy resin system in relation to toxicity categories. SETAC Europe 34th Annual Meeting, 2024-05-05 - 2024-05-09, Seville, Spain. file

  Gebhardt, Magnus and Manolakis, Ioannis and Kalinka, Gerhard and Chakraborty, Souvik and Meiners, Dieter (2023) Influence of resin's chemistry on the bulk properties of CFRPs processed with recycled carbon fibres. ICCM23, 2023-07-31 - 2023-08-04, Belfast, UK. Volltext nicht frei. file

  Govers, Yves and Gnebner, Kevin and Gundlach, Janto and Tang, Martin and Thiem, Carsten and Knebusch, Johannes and Buchbach, Ralf and Sinske, Julian and Soal, Keith Ian and Schwochow, Jan and Winter, Rene and Hach, Oliver and Verdonck, Hendrik and Hennings, Holger and Opitz, Steffen and Moix-Bonet, Maria and Garbade, Marc and Kühn, Michael and Liebers, Nico and Prussak, Robert and Jauken, Helge and Liesecke, Leon and Wölk, Philipp and Seume, Jörg R. and Messing, Ralf and Troyke, Alexander and Bertolotti, Fabio (2023) German research wind farm WiValdi: Planning, installation and testing of innovative research instrumentation for six wind turbine rotor blades. Wind Energy Science Conference, 2023-05-23 - 2023-05-26, Glasgow, Großbritannien. (Unpublished) Volltext nicht online.

  Gümbel, Clara (2024) Untersuchung des Ausmaßes von Vorderkantenerosion an Rotorblättern von Windkraftanlagen und die damit verbundenen Umweltauswirkungen. DLR-Interner Bericht. DLR-IB-SY-BS-2024-207. Master's. TU Braunschweig. 74 S. file

  Gümbel, Clara and Bachmann, Jens and Opitz, Steffen and Chakraborty, Souvik (2025) Erosion in wind turbine blade during service life: a quantification approach. 45th Risø International Symposium on Materials Science, 2025-09-01 - 2025-09-05, DTU Wind, Risø. Denmark. Volltext nicht online.

  Kazembe, Thelima Thelisi (2025) Online monitoring of Solvent Based Recycling. DLR-Interner Bericht. DLR-IB-SY-SD-2025-146. Master's. PFH Private University of Applied Sciences. 90 S. Volltext nicht frei. file

  Koffler, Joséphine and Rahn, Antonia and Oestreicher, Anne and Kroos, Karina and Wende, Gerko (2025) Evaluating the Environmental Impact of End-of-Life Management in Aircraft Components: A Life Cycle Assessment Approach. In: 32nd CIRP Conference on Life Cycle Engineering, LCE 2025, 135, pp. 570-575. 32th CIRP Life Cycle Engineering Conference, 2025-04-07 - 2025-04-09, Manchester, United Kingdom. doi: 10.1016/j.procir.2024.12.051. ISSN 2212-8271. file

  Kreikemeier, Janko (2022) Numerische Resttragfähigkeitsuntersuchung einer Flugzeugrumpf-Schweißverbindung nach Impactbelastung. Mechanik-Kolloquium "Angewandte Mechanik", 2022-09-23, Otto-von-Guericke-Universität Magdeburg. Volltext nicht frei. file

  Kreikemeier, Janko (2024) Integrating Numerical Assessment and Experimental Disassembly for Sustainable Evaluation of Bonded CFRP Structures: A Life Cycle Analysis Approach. 5th International Conference on Materials, Science & Nanotechnology - Future Materials 2024, 2024-10-21 - 2024-10-25, Athens, Greece. Volltext nicht frei. file

  Kreikemeier, Janko (2024) Thermoplastic Joints - Tests and Simulations. Composites United -Working Group Meeting "Manufacturing Process Simulation", 2024-10-22, Stade, Deutschland. Volltext nicht frei. file

  Kreikemeier, Janko (2024) Luftfahrt im Wandel: Green Deal-Meilenstein für nachhaltige Bauteil-Wiederverwendung. Other. Other. file

  Kreikemeier, Janko (2023) Clean Sky 2 Projekt ICASUS - "Integrated Cabin-Airframe-System Fuselage". Deutscher Luft- und Raumfahrtkongress, 2023-10-19 - 2023-10-21, Stuttgart, Deutschland. Volltext nicht frei. file

  Kreikemeier, Janko and Amit, Amit and Opitz, Steffen (2025) Towards a Circular Future with Structural Life 2.0 and Blockchain-Approach. The 4th World Symposium on Materials Sciences and Engineering 2025, 2025-12-02, Singapore. Volltext nicht frei. file

  Kreikemeier, Janko and Dreher, Patrik Nikolas and Torstrick-v.d.Lieth, Sven (2016) Preliminary Document on Advanced Manufacturing Technologies. DLR-Interner Bericht. DLR-IB-SY-BS-2024-19. Project thesis. 22 S. Volltext nicht frei. file

  Kreikemeier, Janko and Opitz, Steffen and Erdogan, Cem (2025) Insights into impact simulation and fatigue analysis of thermoplastically jointed lapshear specimens. CEAS Aeronautical Journal. Springer. doi: 10.1007/s13272-024-00804-z. ISSN 1869-5582. Volltext nicht frei. file

  Kreikemeier, Janko and Ropte, Sven (2021) Multifunctional frame with function integration. DLR-Interner Bericht. DLR-IB-SY-BS-2024-31. Project thesis. 42 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schatrow, Paul and Waimer, Matthias (2016) Enabler Selection List. DLR-Interner Bericht. DLR-IB-SY-BS-2024-17. Project thesis. 31 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2019) Verified damage model for prediction of failure of welding zone. DLR-Interner Bericht. DLR-IB-SY-BS-2024-27. Project thesis. 25 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2021) L-Pull and Lapshear Test Campaign, interim report. DLR-Interner Bericht. DLR-IB-SY-BS-2024-33. Project thesis. 43 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2016) ICASUS – Draft Report on DLR Preliminary Results in Clean Sky 2 Large Passenger Aircraft. DLR-Interner Bericht. DLR-IB-SY-BS-2024-39. Project thesis. 104 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2016) ICASUS – One Pager Collection. DLR-Interner Bericht. DLR-IB-SY-BS-2024-40. Project thesis. 202 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2017) Means of Compliance. DLR-Interner Bericht. DLR-IB-SY-BS-2024-21. Project thesis. 54 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2019) The L-pull and lapshear test campaigns. DLR-Interner Bericht. DLR-IB-SY-BS-2024-26. Project thesis. 18 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2017) Demonstrator Baseline. DLR-Interner Bericht. DLR-IB-SY-BS-2024-22. Project thesis. 15 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2018) Final Document on Future Fuselage Architecture, Material Options and Product Breakdown Structure to show the Build Concept. DLR-Interner Bericht. DLR-IB-SY-BS-2024-23. Project thesis. 54 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2019) Maturation of Joining Technologies. DLR-Interner Bericht. DLR-IB-SY-BS-2024-24. Project thesis. 56 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2018) Final Document on Summary of work for Final document on future fuselage architecture. DLR-Interner Bericht. DLR-IB-SY-BS-2024-25. Project thesis. 56 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel (2016) Requirements and Functions for Fuselage Architecture. DLR-Interner Bericht. DLR-IB-SY-BS-2024-16. Project thesis. 39 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel and Kolbe, Andreas (2021) Lapshear and L-pull test campaigns. DLR-Interner Bericht. DLR-IB-SY-BS-2024-30. Project thesis. 56 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schmidt, Daniel and Kolbe, Andreas (2019) TP AFP Xenon and Laser heating technology. DLR-Interner Bericht. DLR-IB-SY-BS-2024-28. Project thesis. 16 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schulze, Karola and Schmidt, Daniel (2016) Preliminary Document on Material Options. DLR-Interner Bericht. DLR-IB-SY-BS-2024-20. Project thesis. 17 S. Volltext nicht frei. file

  Kreikemeier, Janko and Schwieger, Hans Helge (2024) Approach for non-destructive Disassembly of Bonded CFRP Structures. 5th International Conference on Materials Science & Engineering, 2024-06-10 - 2024-06-13, San Francisco, USA. Volltext nicht frei. file

  Kreikemeier, Janko and Schwieger, Hans Helge (2025) Mathematical insights into disassembly and separation of highly stressed CFRP structures. CEAS Aeronautical Journal (16), pp. 557-569. Springer. doi: 10.1007/s13272-025-00813-6. ISSN 1869-5590. file

  Kreikemeier, Janko and Schwieger, Hans Helge and Opitz, Steffen (2025) AN ANALYTICAL AND NUMERICAL APPROACH FOR THE DESCRIPTION OF DAMAGE-FREE DISASSEMBLY OF JOINED CFRP STRUCTURES. GAMM Conference 2025, 2025-04-07 - 2025-04-11, Poznan, Poland. Volltext nicht frei. file

  Kreikemeier, Janko and Völkerink, Oliver and Waimer, Matthias (2021) Design for MFFD-Longitudinal Joint and Cargo Container Characterization for Crash Applications. DLR-Interner Bericht. DLR-IB-SY-BS-2024-32. Project thesis. 98 S. Volltext nicht frei. file

  Kroos, Karina and Bachmann, Jens and Bülow, Christian and Diniz, Sabrina and Freund, Sebastian and Kleineberg, Markus and Rahn, Antonia and Opitz, Steffen (2025) Flying with liquid hydrogen: an assessment of CFRP fuel tank manufacturing in the aviation industry and its challenges. The 12th International Conference on Life Cycle Management, 2025-09-09 - 2025-09-12, Palermo, Italien. Volltext nicht frei. file

  Kroos, Karina and Bachmann, Jens and Bülow, Christian and Opitz, Steffen (2025) Environmental assessment of the CFRP shells of a Type V liquid hydrogen tank for the aviation sector. Architecting Future Aviation, 2025-04-01 - 2025-04-02, Hamburg, Deutschland. file

  Kroos, Karina and Diniz, Sabrina and Bachmann, Jens and Chakraborty, Souvik and Kühnast, Fabian and Schmidt, Jan-Uwe Reinhard and Opitz, Steffen (2024) FILAMENTS FOR ADDITIVE MANUFACTURING REINFORCED WITH CARBON FIBERS FROM WASTE STREAM. In: Proceedings of ECCM21: Volume 7 - Life cycle performance. The European The European Society for Composite Materials (ESCM) and the Ecole Centrale de Nantes.. 21st European Conference on Composite Materials, 2024-07-02 - 2024-07-05, Nantes, France. doi: 10.60691/yj56-np80. ISBN 978-2-912985-01-9. file

  Kroos, Karina and Diniz, Sabrina and Bachmann, Jens and Opitz, Steffen (2024) How the Use of Different Databases Affects the Comparability of Life Cycle Assessment Results of Fibre Reinforced Polymer Composites. SETAC Europe 26th LCA Symposium, 2024-10-21 - 2024-10-23, Göteborg, Schweden. filefile

  Kühn, Alexandra and Brauer, Christoph (2025) Burning Questions answered-Machine Learning Solutions for Fire Damage Prediction. CU Innovation Day Composites Structures in Interiors, 2025-09-02 - 2025-09-03, Stade. Volltext nicht frei. file

  Kühn, Alexandra and Brauer, Christoph and Monkiewitsch, Monika (2024) Ich sehe was, was Du nicht siehst - Vorhersage von Brandprüfungsergebnissen mittels KI. Other. Other. file

  Lobitz, Lennart and Bülow, Christian and Heimbs, Sebastian and Horst, Peter (2025) Benefits from Thin-Ply Composite Materials in Aircraft Wing Structures. Aerospace, 12 (12), p. 1078. Multidisciplinary Digital Publishing Institute (MDPI). doi: 10.3390/aerospace12121078. ISSN 2226-4310. file

  Lossau, Matthias and Schmidt, Jan-Uwe Reinhard and Chakraborty, Souvik (2025) DLR closes the loop in fiber-reinforced 3D printing with EmpowerAX, SchallFTP projects. Composites World. [Other] Volltext nicht frei. file

  Opitz, Steffen (2025) Sustainable lightweight systems for aviation and wind energy. CU Innovation Day “The Service Life of Wind Turbine Blades: Inspection, Repairs & End of Life”, 2025-04-01, Bremerhaven, Deutschland. Volltext nicht frei. file

  Opitz, Steffen (2024) Systemleichtbau in einer werterhaltenden Kreislaufwirtschaft. DLR-Wissenschaftstag 2024 – Nachhaltigkeit und Ressourceneffizienz durch Systemleichtbau, 2024-09-26, Braunschweig, Deutschland. Volltext nicht frei. file

  Opitz, Steffen (2024) Nachhaltigkeit und Ressourceneffizienz durch Systemleichtbau. DLR-Wissenschaftstag 2024 – Nachhaltigkeit und Ressourceneffizienz durch Systemleichtbau, 2024-09-26, Braunschweig, Deutschland. Volltext nicht frei. file

  Paletti, Ligeia and Kan, Daniel and Rahn, Antonia and Bachmann, Jens and Albano, Joana and Höller, Maria and Diniz, Sabrina and Kroos, Karina and Scheers, Elise (2025) LIFE CYCLE ASSESSMENT IN THE AIR TRANSPORT SYSTEM. Other. file

  Prats Salvado, Enric and Neumann, Nicole and JAGTAP, NIPUN and Schlosser, Steffen Johannes and Bachmann, Jens and Monnerie, Nathalie and Roeb, Martin and Naegler, Tobias and Lorenz, Tom (2024) QUANTIFYING CIRCULAR DESIGN: METRICS FOR SUSTAINABLE INNOVATION. DECHEMA FORUM, 2024-09-11 - 2024-09-13, Friedrichshafen, Germany. Volltext nicht frei. file

  Schmidt, Daniel and Haase, Thomas and Dreher, Patrik Nikolas and Beerhorst, Matthias and Kreikemeier, Janko (2016) Preliminary Document on Future Fuselage Architecture. DLR-Interner Bericht. DLR-IB-SY-BS-2024-18. Project thesis. 35 S. Volltext nicht frei. file

  Schwieger, Hans Helge and Kreikemeier, Janko (2024) Entwicklung eines Prüfstands für CFK-Demontagetechnologien. DLR-Interner Bericht. DLR-IB-SY-BS-2024-73. Master's. TU Braunschweig. 136 S. Volltext nicht frei. file

  Tariq, Muzzamil and Scheffler, Sven and Anilkumar, P. M. and Sämann, Philipp and Bülow, Christian and Wiedemann, Martin and Rolfes, Raimund (2024) Evaluating the mechanical behavior of carbon composites with varied ply-thicknesses using acoustic emission measurements. Journal of Composite Materials. SAGE Publications. doi: 10.1177/00219983241297561. ISSN 0021-9983. file

  Tenbrock, Sarah (2025) Ökologische Bewertung von Verbundbauteilen im Luftfahrtsektor. DLR-Interner Bericht. DLR-IB-SY-BS-2025-167. Master's. TU Braunschweig. 92 S. file

  Ucan, Hakan and Nguyen, Chinh Duy and Denker, Björn and Haschenburger, Anja and Kühn, Alexandra and Hein, Robert and Kühn, Michael and Liebers, Nico and Kappel, Erik and Prussak, Robert (2023) LEITWERK - VTP Multispar, Zwischenbericht 2022. DLR-Interner Bericht. DLR-IB-SY-SD-2023-51. Project thesis. 72 S. Volltext nicht frei. file

  Zhang, Xiaohui and Sebari, Reda and Chakraborty, Souvik and Baz, Stephan and Gresser, Götz T. and Benner, Wladislaw and Brämer, Thilo and Steuernagel, Lief and Ionescu, Emanuel and Deubener, Joachim and Beuermann, Sabine and Ziegmann, Gerhard and Wilhelm, Rene (2024) Epoxy-Based Carbon Fiber-Reinforced Plastics Recycling via Solvolysis with Non-Oxidizing Methanesulfonic Acid. Chemie Ingenieur Technik, 96 (7), pp. 987-997. Wiley. doi: 10.1002/cite.202300243. ISSN 0009-286X. file

This list was generated on Fri Feb 13 20:32:46 2026 CET.
Browse
Search
Help & Contact
Information
OpenAIRE Validator logo electronic library is running on EPrints 3.3.12
Website and database design: Copyright © German Aerospace Center (DLR). All rights reserved.