elib
DLR-Header
DLR-Logo -> http://www.dlr.de
DLR Portal Home | Impressum | Datenschutz | Barrierefreiheit | Kontakt | English
Schriftgröße: [-] Text [+]

Influence of Artificial Seawater Corrosion on the Fatigue Strength of 40 mm Thick Welded Details for Offshore Wind Support Structures

Shojai, Sulaiman und Woitzik, Christian und Braun, Moritz und Ehlers, Sören (2026) Influence of Artificial Seawater Corrosion on the Fatigue Strength of 40 mm Thick Welded Details for Offshore Wind Support Structures. 45th International Conference on Ocean, Offshore and Arctic Engineering - OMAE 2026, 2026-06-07 - 2026-06-12, Tokyo, Japan. doi: 10.1115/OMAE2026-182297.

[img] PDF
2MB

Offizielle URL: https://doi.org/10.1115/OMAE2026-182297

Kurzfassung

Offshore wind support structures are exposed to cyclic loading and harsh environmental conditions that can promote corrosion and potentially affect fatigue performance. This study investigates the influence of long-term artificial seawater corrosion on the fatigue strength of thick welded steel details representative of offshore applications. Butt-welded and fillet-welded joints with plate thickness of 40 mm were exposed to artificial seawater for 12 months and subsequently tested under four-point bending fatigue loading. Changes in weld geometry induced by corrosion were quantified using optical 3D surface scans. The results show that artificial seawater does not reduce the characteristic fatigue strength of the investigated joints. While butt welds exhibit comparable fatigue performance before and after corrosion, fillet welds show an increase in fatigue strength due to corrosion-induced smoothing of the weld toe geometry. These findings indicate that corrosion-induced surface modifications should be considered in fatigue assessment and lifetime extension strategies for offshore wind support structures

elib-URL des Eintrags:https://elib.dlr.de/225288/
Dokumentart:Konferenzbeitrag (Vortrag)
Titel:Influence of Artificial Seawater Corrosion on the Fatigue Strength of 40 mm Thick Welded Details for Offshore Wind Support Structures
Autoren:
AutorenInstitution oder E-Mail-AdresseAutoren-ORCID-iDORCID Put Code
Shojai, Sulaimansulaiman.shojai (at) dlr.dehttps://orcid.org/0000-0001-5016-3623NICHT SPEZIFIZIERT
Woitzik, ChristianNICHT SPEZIFIZIERThttps://orcid.org/0000-0002-4832-3576NICHT SPEZIFIZIERT
Braun, Moritzmoritz.braun (at) dlr.dehttps://orcid.org/0000-0001-9266-1698NICHT SPEZIFIZIERT
Ehlers, Sörensoren.ehlers (at) dlr.dehttps://orcid.org/0000-0001-5698-9354NICHT SPEZIFIZIERT
Datum:2026
Referierte Publikation:Ja
Open Access:Ja
Gold Open Access:Nein
In SCOPUS:Nein
In ISI Web of Science:Nein
DOI:10.1115/OMAE2026-182297
Name der Reihe:Proceedings of the ASME 2026 45th International Conference on Ocean, Offshore and Arctic Engineering OMAE2026
Status:veröffentlicht
Stichwörter:Offshore wind support structures; fatigue strength; welded joints; artificial seawater corrosion; 3D surface scanning; weld geometry; lifetime extension
Veranstaltungstitel:45th International Conference on Ocean, Offshore and Arctic Engineering - OMAE 2026
Veranstaltungsort:Tokyo, Japan
Veranstaltungsart:internationale Konferenz
Veranstaltungsbeginn:7 Juni 2026
Veranstaltungsende:12 Juni 2026
HGF - Forschungsbereich:Luftfahrt, Raumfahrt und Verkehr
HGF - Programm:Verkehr
HGF - Programmthema:Schiffsverkehr
DLR - Schwerpunkt:Verkehr
DLR - Forschungsgebiet:V WA - Schiffsverkehr
DLR - Teilgebiet (Projekt, Vorhaben):V - MOSAIC, V - keine Zuordnung
Standort: Kiel
Institute & Einrichtungen:Institut für Maritime Technologien und Antriebssysteme
Hinterlegt von: Shojai, Sulaiman
Hinterlegt am:11 Nov 2026 10:17
Letzte Änderung:11 Nov 2026 10:17

Nur für Mitarbeiter des Archivs: Kontrollseite des Eintrags

Blättern
Suchen
Hilfe & Kontakt
Informationen
OpenAIRE Validator logo electronic library verwendet EPrints
Gestaltung Webseite und Datenbank: Copyright © Deutsches Zentrum für Luft- und Raumfahrt (DLR). Alle Rechte vorbehalten.