Oxidation Tests on MAN-T-Samples in the Arc-heated Facility L2K - MSTP-ALSCAP-Program -.
Gülhan, A. (1996) Oxidation Tests on MAN-T-Samples in the Arc-heated Facility L2K - MSTP-ALSCAP-Program -. DLR-Interner Bericht. 39113-96C03, 20 S.
Full text not available from this repository.
Test samples developed by MAN-Technologie in the frame of the alternative low cost short manufacturing cycle ceramic material programme (ALSCAP) of ESA were tested at three different test conditions in the arc-heated facility L2K. The surface pressure and temperature for each test sample were 10 hPa, 1350 centigrades; 100 hPa, 1350 centigrades; and 100 hPa, 1500 centigrades. While two test cycles were performed at 10 hPa, the samples, for the test point at 100 hPa, were exposed to four oxication cycles. The test duration at steady state surface conditions was 300 seconds. Higher mass losses were measured during the first test cycle for all three samples. A white protective layer developed during the initial phase of the first cycle was responsible for this phenomenon. Significant increase on the sample mass loss was noticed by increasing the surface pressure from 10 hPa to 100 hPa. The influence of the temperature change of about 150 centigrades on the results sems to be weak.
|Document Type:||Monograph (DLR-Interner Bericht)|
|Title:||Oxidation Tests on MAN-T-Samples in the Arc-heated Facility L2K - MSTP-ALSCAP-Program -.|
|Number of Pages:||20|
|Keywords:||ALSCAP, MAN-Technologie, oxidation cycles, L2K.|
|HGF - Research field:||UNSPECIFIED|
|HGF - Program:||Space|
|HGF - Program Themes:||W RP - Raumtransport|
|DLR - Research area:||UNSPECIFIED|
|DLR - Program:||W RP - Raumtransport|
|DLR - Research theme (Project):||UNSPECIFIED|
|Institutes and Institutions:||Institute of Aerodynamics and Flow Technology > Supersonic and Hypersonic Technology|
|Deposited By:||elib DLR-Beauftragter|
|Deposited On:||02 Apr 2006|
|Last Modified:||27 Apr 2009 05:29|
Repository Staff Only: item control page